• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.103-109
• /
• 2008

In this papaer, a new type of ${\lambda}_g/4$ short stub band pass filter and ${\lambda}_g/2$ open stub band pass filter are purposed. Both are designed using FSCS technique for harmonic suppression. The proposed filters that used FSCS technique and a broadband stop filter is integrated to band pass filter to suppress the harmonics. The BSF are also placed between stubs so that the size is larger than prevent as compared to conventional one. The propose filters have center frequency of 5.8 GHz, bandwidth of 50% and harmonics suppressin is 120% has in bandwith. The measurement results in the case of ${\lambda}_g/4$ short stub filter, insertion loss of 0.5 dB, return loss of 14 dB are achieved and in the case of ${\lambda}_g/2$ open stub filter, loss of 0.8 dB, return loss of 14.4 dB are achieved. The simulation results and the measurement results are almost the same.

• International Journal of Highway Engineering
• /
• v.14 no.1
• /
• pp.73-83
• /
• 2012

Effective use of traffic marking can lead to driver's safer driving by speed management and visibility enhancement. One of the critical factors in designing traffic marking is how to incorporate human factor issues into the design process. This study presented a methodology for evaluating the effectiveness of Hi-pass marking on Korean freeways based on kansei engineering. Hi-pass marking scenarios made by a virtual reality tool were used to evaluate the user's perceptions. Various combination of chevron angles and peripheral transverse(PT) bars were used for the evaluation. The results show that the most effective scenario is a combination of 60 degree chevron angle and an askew parallelogramshaped PT bar shaped. It is expected that the proposed method and outcome will be useful for making safer driving maneuvers.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.539-549
• /
• 2017

This paper proposes an analytical methodology of station capacity calculation on high - speed railway. Our method explicitly takes into account the effect of the number of sidings and the combination of train halting patterns (stop - stop, pass - stop, stop - pass, pass - pass) on the capacity of a station. To verify the reliability of our model, we conducted capacity analysis of selected stations using the Railsys simulator. We found that the difference in calculated capacity between our model and Railsys was less than 10%. After Monte Carlo simulation, our model was determined to be a good one. In addition, the consistency in capacity between our model and the train-path allocation program (Korea Rail Network Authority) was statistically significant.

• Korean Journal of Optics and Photonics
• /
• v.33 no.3
• /
• pp.106-112
• /
• 2022

A two-dimensional optical code division multiple access (OCDMA) encoder/decoder, which is composed of add/drop filters and all-pass filters for delay operation, is proposed. An example design is presented, and its feasibility is illustrated through numerical simulations. The chip area of the proposed OCDMA encoder/decoder could be about one-third that of a previous OCDMA device employing delay waveguides. Its performance is numerically investigated using the transfer-matrix method combined with the fast Fourier transform. The autocorrelation peak level over the maximum cross-correlation level for incorrect wavelength hopping and spectral phase code combinations is greater than 3 at the center of the correctly decoded pulse, which assures a bit error rate lower than 10^-3, corresponding to the forward error-correction limit.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.2
• /
• pp.19-38
• /
• 2023

Nitrous oxide, one of the six greenhouse gases from Kyoto protocol, is known to be emitted in biological nitrification and denitrification reactions at wastewater treatment plant. In this study, EQPS which is a computer program that can simulate nitrous oxide gas emission amount at wastewater treatment plants is used. The MLE process which treats wastewater from combined sewer is studied. Operational variables which are MLR, water temperature at reactor and primary clarifier by-pass percentage are changed to define the condition which produces the least amount of nitrous oxide gas. 200 % of MLR, 20 ℃ of water temperature at bioreactor and 15 % of primary clarifier by-pass percentage are shown the least nitrous oxide emission factor. Also, it is found that the deep aeration tank produces less amount of nitrous oxide gas since less air is required to meet oxygen demand in this type of aeration tank.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.7 no.4
• /
• pp.156-160
• /
• 1982

A Comb Filter(C.F.) is constucted with a N-stages one-dimensional B.B.D.(Bucket-Brigade Device) delay line. One channel of the B.P.F. (Band Pass Filter) Bank is experimented, which includes a R.F.(Recursie Filter) using S/H circuits cascaded to the C.F. This algorithm of the C.F.B.(Comb Filter Bank) becomes the parallel spectrum analyzer circuit. The algorithm has less number of multiplication than that of FFT and improves the SNR.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.1
• /
• pp.1-6
• /
• 1985

The point spread function of defocussed image is known as two dimensional function, one of rectangular type and Gaussian type function and etc, and the defocussed image can be modeled as the convolved output between original image and the supposed PSF. But, in .case of analog method using the scanning line of TV camera, one dimensional Process can be effective, and it was shown thats the defocussed image can be analyzed as the convolved output betlween the original image and the pule with finite width in the horizontal irection. And uslng TV camera and a analog compound high pass filter, the restoration experiment Is matte and we have got some pictures with remarked improvements.

• Journal of Korea Game Society
• /
• v.9 no.4
• /
• pp.81-88
• /
• 2009

In this paper, I suggested a way for searching a path of the intelligent character in an action game by using a genetic algorithm. This realized the algorithm which enables not only to chose the nearest path but also to search the optimum path by using genetic algorithm. In this case, if the codes of chromosomes are applied as they are, a lot of lethal genes could occur. In order to solve such a problem, I used a splicing method, one of the DNA's behavior characteristics. The intelligent character searched out a optimum pass as well as a shortcut path with one treatment by using the characteristic of a genetic algorithm which generates multiple candidate solutions in the search process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.747-750
• /
• 2006

A turnout which permits trains to pass from one track to another has a disconnecting rail component, namely a crossing, so that noise and vibration arc occurred abruptly when train is passing through it. In Korea, it is planned to adopt the high speed tilting train, which operates at the speed of 180 km/h, at the conventional line. However, for application of the tilting train, it is prerequisite to establish the stable turnout system allowing the tilting train to pass through it without reducing speed. This study was performed to evaluate noise and vibration emitted from the prototype turnout which is developed for speed-up of the conventional line. For the purpose, noise and vibration were measured at near the conventional turnout and the improved one, which is constructed at Waegwan station and Kumi station of Gyeongbu line, respectively.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.5
• /
• pp.595-604
• /
• 2002

In this paper, we designed the encryption algorithm which protects ciphertext from deciphering solve the problem that it can pass the incorrect meaning. The algorithm checks the error of ciphertext during deciphering, and then if there are some errors of more than one bit. It stops the deciphering sequence and it doesn't pass any contents to receiver by removing the deciphering contents which was already done. The experiment compared with DES algorithm that is representative algorithm of secret key. As the result of experiment, the part that error bit was included with was deciphered to one that was different from plaintext, but it showed 100% decipher_rate. by the algorithm showed decipher_rate of 0% with deciphering through the error check.