• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.469-472
• /
• 2007

최근 많은 광대역 유무선 통신 응용분야에서 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 표준기술로 채택하고 있다 OFDM 방식의 고속 무선 데이터 통신를 위한 FFT 프로세서는 일반적으로 DSP(Digital Signal Processing)로 구현되었으나, 큰 전력 소비를 필요로 한다. OFDM의 단점인 전력문제를 보안하기 위해서 Current-mode FFT LSI가 제안되었다. 본 논문에서는 Current-mode FFT LSI의 구현을 위한 저전력 IVC를 설계하였다. 설계된 IVC는 FFT Block의 출력이 $13.65{\mu}A$ 이상일 때에 3V 이상의 전압을 출력하고, FFT Block의 출력이 $0.15{\mu}A$ 이하일 때에 0.5V 이하의 전압을 출력한다. 그리고 IVC의 총 소모전력은 약 1.65mW이다. $0.35{\mu}A$ 공정에서의 저전력 IVC를 설계함으로서, $0.35{\mu}A$ 공정에서의 Current-mode FFT LSI의 설계가 가능해졌다. 저전력 OFDM 통신용 Current-mode FFT LSI는 무선통신의 발전에 기여할 것으로 전망한다.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.569-574
• /
• 2007

최근 많은 광대역 유무선 통신 응용분야에서 OFDM(Orthogonal Frequency Division Multiplexing) 방식을 표준기술로 채택하고 있다. OFDM 방식의 고속 무선 데이터 통신을 위한 FFT 프로세서는 일반적으로 DSP(Digital Signal Processing)로 구현되었으나, 큰 전력 소비를 필요로 한다. 따라서, OFDM 통신방식의 단점인 전력문제를 보완하기 위해서 전류모드 FFT LSI가 제안되었고, 저소비전력 전류모드 FFT LSI를 동작시키기 위해서는 전류모드를 전압모드로 바꾸는 VIC(Voltage to Current Converter) 그리고 다시 전류모드를 전압모드로 바꾸어 주는 IVC(Current to Voltage Converter)가 필요하다. 그러나, OP-AMP로 구현되는 종래의 IVC는 회로규모가 크고, 전력소비가 크며, LSI 내에 크고 정확한 높은 저항을 필요로 한다. 또한 전류모드신호처리에서 많이 이용되는 Current Mirror 회로 등의 출력단자로부터 전류신호를 입력받은 경우, 입력단자간의 전위차가 발생하며, DC offset 전류가 발생하는 등의 문제점을 갖는다. 따라서 본 연구에서는 저전력 동작이 가능하고, 향후, single chip 응용이 가능한 IVC를 $0.35{\mu}m$ 공정에서 설계함으로서, $0.35{\mu}m$ 공정에서의 전류모드 FFT LSI의 전압모드 출력이 가능해졌다 설계된 IVC는 FFT LSI의 출력이 디지털신호로 환산한 ${\pm}1$인 점을 감안하여, 전류모드 FFT LSI의 출력이 $13.65{\mu}A$ 이상일 때에 3.0V의 전압을 출력하고, FFT LSI의 출력이 $0.15{\mu}A$ 이하일 때에 0.5V 이하의 전압을 출력하도록 하였으며, IVC의 총 소비전력은 약 1.65mV이하로 평가되었다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.2
• /
• pp.86-92
• /
• 2008

Othogonal Frequency Division Multiplexing(OFDM) has been taken notice of 4th generation communication method because it has a merit of high data rate(HDR). To realize HDR communication, The OFDM a s high efficient Fast-Fourier-Transform (FFT)/Inversion FFT (IFFT) processor. Currently OFDM is realized by Digital Signal Processor(DSP) but it consumes a lot of Power. Therefore, current-mode FFT LSI has been proposed for compensation of this demerit. In this paper, we propose IVC for current-mode FFT LSI. From the simulation result, the output value of IVC is more than 3V when the value of FFT Block output is more than $7.35{\mu}A$. The output value of IVC is lower than 0.5V when the value of FFT Block output is lower than $0.97{\mu}A$. Designed IVC Low-power Current mode FFT LSI will contribute to the operation of current-mode FFT LSI and the development of next generation wireless communication systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.1
• /
• pp.39-45
• /
• 2009

OFDM is used for achieving a high-speed data transmission in mobile wireless communication systems. Conventionally, fast Fourier transform that is the main signal processing of OFDM is implemented using digital signal processing. The DSP FFT LSI requires large power consumption. Current-mode FFT LSI with analog signal processing is one of the best solutions for high speed and low power consumption. However, for the operation of current-mode FFT LSI that has the structure of parallel-input and parallel-output, current-mode serial-to-parallel and parallel-to-serial converter are indispensable. We propose a novel current-mode SPC and PSC and full chip simulation results agree with experimental data. The proposed current-mode SPC and PSC promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2007.04a
• /
• pp.477-480
• /
• 2007

저전력 OFDM(orthogonal frequency division multiplexing) 시스템용 FFT(Fast-Fourier-Transform) LSI를 저전력 동작을 시키기 위해서 FFT LSI는 current-mode 회로로 구현되었다. Current-mode FFT LSI에서, VIC(Voltage-to-current converter)는 입력 전압 신호를 전류로 바꾸는 first main device이다. 저전력 OFDM을 위해 FFT LSI와 VIC가 한 개의 칩과 결합되는 것을 고려하면, VIC는 전력 손실은 낮고, VIC와 FFT LSI 사이에서의 DC offset 전류는 최소인 작은 크기의 chip으로 설계되어야 한다. 본 논문에서는 새로운 VIC를 제안한다. 선형 동작구간을 넓히고 DC offset 전류를 대폭 감소하는 방법을 제시하였다. VIC는 0.35[um] CMOS process로 구현되었으며, 시뮬레이션 결과에 따르면 제안된 VIC는 current-mode FFT LSI와 0.1[uA] 미만의 매우 작은 DC offset 전류, 1.4[V]의 넓은 선형구간을 갖으며, 저전력으로 동작한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.5
• /
• pp.66-74
• /
• 2002

OFDM(Orthogonal Frequency Division Multiplexing)is a one of the nst promising digital modulation techniques adapted for Digital audio broadcasting or Digital TV since it is very robust against multipath fading channels. From 1997, since the OFDM technique was considered as the physical layer standard for the high data rate wireless LAN systems in the 5㎓ band, related studies have been studied actively. The key element to implement high data rate wireless LAN system using OFDM technique are IFFT and FFT modules. In this paper, new IFFT and FFT module are designed and implemented using current cut circuit based on the matrix-rounding process for the low-power consumptive operation and high-speed data processing. In addition to, we certify the available operation of the rounded IFFT/FFT module in the AWGN channel by using the BER performance simulation of IEEE 802.11TGa based OFDM modem with rounded IFFT/FFT module.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.89-95
• /
• 2008

In the maritime communication, Orthogonal Frequency Division Multiplexing (OFDM) communication terminal should be operated with low power consumption, because the communication should be accomplished in the circumstance of disaster. Therefore, Low power FFT processor is required to be designed with current mode signal processing technique than digital signal processing. Current- to-Voltage Converter (IVC) is a device that converts the output current signal of FFT processor into the voltage signal. In order to lessen the power consumption of OFDM terminal, IVC should be designed with low power design technique and IVC should have wide linear region for avoiding distortion of signal voltage. To design of one-chip of the FFT LSI and IVC, IVC should have a small chip size. In this paper, we proposed the new IVC with wide linear region. We confirmed that the proposed IVC operates linearly within 0.85V to 1.4V as a function of current-mode FFT output range of -100~100[uA]. Designed IVC will contribute to realization of low-power maritime data communication using OFDM system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10A
• /
• pp.776-783
• /
• 2009

Current-cut circuit is an effective method to obtain low power consumption in wireless communication systems as high speed OFDM. For the operation of current-mode FFT LSI with analog signal processing essentially requires current-mode serial-to-parallel/parallel-to-serial converter with multi input and output structure. However, the Hold-mode operation of current-mode serial-to-parallel/parallel-to-serial converter has unnecessary power consumption. We propose a novel current-mode serial-to-parallel/parallel-to-serial converter with current-cut circuit and full chip simulation results agree with experimental data of low power consumption. The proposed current-mode serial-to-parallel/parallel-to-serial converter promise the wide application of the current-mode analog signal processing in the field of low power wireless communication LSI.