• Nuclear Engineering and Technology
• /
• v.41 no.4
• /
• pp.391-402
• /
• 2009

This paper introduces the development of safety assessment technology in Korea, focusing on the activities of the Korea Atomic Energy Research Institute in the areas of system thermal hydraulics, severe accidents and probabilistic safety assessment. In the 1970s and 1980s, safety analysis codes and methodologies were introduced from the United States, France, Canada and other developed countries along with technology related to the construction and operation of nuclear power plants. The main focus was on understanding and utilizing computer codes that were sourced from abroad up to the early 1990s, when efforts to develop domestic safety analysis codes and methodologies became active. Remarkable achievements have been made over the last 15 years in the development and application of safety analysis technologies. In addition, significant experimental work has been performed to verify the safety characteristics of reactors and fuels as well as to support the development and validation of analysis methods.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.19-29
• /
• 2021

This paper presents the validation of the MCS code for critical safety analysis with burnup credit for the spent fuel casks. The validation process in this work considers five critical benchmark problem sets, which consist of total 80 critical experiments having MOX fuels from the International Criticality Safety Benchmark Evaluation Project (ICSBEP). The similarity analysis with the use of sensitivity and uncertainty tool TSUNAMI in SCALE was used to determine the applicable benchmark experiments corresponding to each spent fuel cask model and then the Upper Safety Limits (USLs) except for the isotopic validation were evaluated following the guidance from NUREG/CR-6698. The validation process in this work was also performed with the MCNP6 for comparison with the results using MCS calculations. The results of this work showed the consistence between MCS and MCNP6 for the MOX fueled criticality benchmarks, thus proving the reliability of the MCS calculations.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.139-147
• /
• 2016

Nuclear energy is considerably cheap and clean compared to other fossil fuels. Yet, there are rising safety concerns of nuclear power plants including the possibility of radiation releasing nuclear accidents. In light of the Fukushima nuclear crisis in 2011, Japan has been re-evaluating their existing energy policies and increasing the share of alternative energy. This paper first tracks the major historical changes of energy policy in Japan by time period. Next, energy security, reignited concerns and alternative energy are covered to examine Japan's energy security situation and its transition after the Fukushima disaster. Lastly, a short survey based on thematic analysis was conducted in South Korea and Japan to understand the public awareness of nuclear. This paper postulates that the case of Fukushima will contribute to establish and operate a safe-future nuclear program in South Korea, given that the country is not only geographically neighbouring Japan but also the world's fourth largest producer of nuclear energy.

• Nuclear Engineering and Technology
• /
• v.46 no.2
• /
• pp.169-182
• /
• 2014

High-performance research reactors require fuel that operates at high specific power to high fission density, but at relatively low temperatures. Research reactor fuels are designed for efficient heat rejection, and are composed of assemblies of thin-plates clad in aluminum alloy. The development of low-enriched fuels to replace high-enriched fuels for these reactors requires a substantially increased uranium density in the fuel to offset the decrease in enrichment. Very few fuel phases have been identified that have the required combination of very-high uranium density and stable fuel behavior at high burnup. U-Mo alloys represent the best known tradeoff in these properties. Testing of aluminum matrix U-Mo aluminum matrix dispersion fuel revealed a pattern of breakaway swelling behavior at intermediate burnup, related to the formation of a molybdenum stabilized high aluminum intermetallic phase that forms during irradiation. In the case of monolithic fuel, this issue was addressed by eliminating, as much as possible, the interfacial area between U-Mo and aluminum. Based on scoping irradiation test data, a fuel plate system composed of solid U-10Mo fuel meat, a zirconium diffusion barrier, and Al6061 cladding was selected for development. Developmental testing of this fuel system indicates that it meets core criteria for fuel qualification, including stable and predictable swelling behavior, mechanical integrity to high burnup, and geometric stability. In addition, the fuel exhibits robust behavior during power-cooling mismatch events under irradiation at high power.

• Nuclear Engineering and Technology
• /
• v.40 no.3
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.19 no.2
• /
• pp.205-214
• /
• 2021

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

• Nuclear Engineering and Technology
• /
• v.51 no.6
• /
• pp.1575-1588
• /
• 2019

Fracture near the U-10Mo/cladding material interface impacts fuel service life. In this work, a mesoscale stress model is developed with the fuel foil considered as a porous medium having gas bubbles and bearing bubble pressure and surface tension. The models for the evolution of bubble volume fraction, size and internal pressure are also obtained. For a U-10Mo/Al monolithic fuel plate under location-dependent irradiation, the finite element simulation of the thermo-mechanical coupling behavior is implemented to obtain the bubble distribution and evolution behavior together with their effects on the mesoscale stresses. The numerical simulation results indicate that higher macroscale tensile stresses appear close to the locations with the maximum increments of fuel foil thickness, which is intensively related to irradiation creep deformations. The maximum mesoscale tensile stress is more than 2 times of the macroscale one on the irradiation time of 98 days, which results from the contributions of considerable volume fraction and internal pressure of bubbles. This study lays a foundation for the fracture mechanism analysis and development of a fracture criterion for U-10Mo monolithic fuels.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1288-1294
• /
• 2022

Hydrogen as an environmentally friendly energy carrier has received special attention to solving uncertainty about the presence of renewable energy and its dependence on time and weather conditions. This material can be prepared from different sources and in various ways. In previous studies, fossil fuels have been used in hydrogen production, but due to several limitations, especially the limitation of the access to this material in the not-too-distant future and the great problem of greenhouse gas emissions during hydrogen production methods. New methods based on renewable and green energy sources as energy drivers of hydrogen production have been considered. In these methods, water or biomass materials are used as the raw material for hydrogen production. In this article, after a brief review of different hydrogen production methods concerning the required raw material, these methods are examined and ranked from different aspects of economic, social, environmental, and energy and exergy analysis sustainability. In the following, the current position of hydrogen production is discussed. Finally, according to the introduced methods, their advantages, and disadvantages, solar electrolysis as a method of hydrogen production on a small scale and hydrogen production by thermochemical method on a large scale are introduced as the preferred methods.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1657-1663
• /
• 2022

This study uses data from 1970 to 2016 to analyze the effect of nuclear energy use on CO₂ emissions and attempts to validate the EKC hypothesis using the Fourier Autoregressive Distributive Lag model in India for the first time. Because of India's rapidly rising population, the environment is being severely strained. However, with 22 operational nuclear reactors, India boasts tremendous nuclear energy potential to cut down on CO₂ emissions. The EKC is validated in India as the significant coefficients of GDP and GDP.² The short-run estimates also suggest that most environmental externalities are corrected within a year. Given the findings, some policy recommendations abound. The negative statistically significant coefficient of nuclear energy consumption is an indication that nuclear power expansion is essential to achieving clean and sustainable growth as a policy goal. Also, policymakers should enact new environmental laws that support the expansion and responsible use of nuclear energy as it is cleaner than fossil fuels and reduces the cost and over-dependence on oil, which ultimately leads to higher economic growth in the long run. Future research should consider studying the nonlinearities in the nuclear energy-CO₂ emissions nexus as the current study is examined in the linear sense.

• Journal of Radiation Protection and Research
• /
• v.34 no.4
• /
• pp.195-200
• /
• 2009

effluents to the environment. The activity of carbon-14, one of the radioactive effluents, in the environment is already high level and its effect on radiation exposure to the public and the environment is insignificant; thus, NPPs did not perform the carbon-14 monitoring in effluents in the past. By the way, effluents of noble gas and particulate radioactive materials originated from nuclear fuels has been continuously reduced due to both the advancement of manufacturing and integrity technology for nuclear fuels and the improvement of operation methods of NPPs. Futhermore, the portion of dose assessment by tritium and carbon-14 to the public has been relatively increased because the lower limit of detection for low-energy beta sources, such as tritium and carbon-14, is low due to the advancement of radiation detection technology. In this paper, the technical background for carbon-14 monitoring in nuclear facilities was investigated using United States technical reports and papers. This paper also reviews whether carbon-14 monitoring is necessary or not based on the investigated documents.