Acknowledgement
This article is dedicated to a grant from Kyung Hee University in 2018 (KHU-20181190).
References
- H. Yun, K. Park, W. Choi, and S.G. Hong, "An Efficient Evaluation of Depletion Uncertainty for a GBC-32 Dry Storage Cask With PLUS7 Fuel Assemblies Using the Monte Carlo Uncertainty Sampling Method", Ann. Nucl. Energy, 110, 679-691 (2017). https://doi.org/10.1016/j.anucene.2017.07.020
- U.S. Nuclear Regulatory Commission. Standard Review Plan for Spent Fuel Dry Storage Systems and Facilities, U.S. Nuclear Regulatory Commission Report, NUREG-2215 (2020).
- U.S. Nuclear Regulatory Commission. Standard Review Plan for Spent Fuel Dry Cask Storage Systems at a General License Facility, U.S. Nuclear Regulatory Commission Report, NUREG-1536, Rev. 1 (2010).
- E.W. Brach. Cladding Considerations for the Transportation and Storage of Spent Fuel, U.S. Nuclear Regulatory Commission Report, Interim Staff Guidance No. 11, Rev. 3 (2003).
- D.J. Richmond and K.J. Geelhood, "FRAPCON Analysis of Cladding Performance During Dry Storage Operations", Nucl. Eng. Technol., 50(2), 306-312 (2018). https://doi.org/10.1016/j.net.2018.01.003
- J. Kim, H. Yoon, D. Kook, and Y. Kim, "A Study on the Initial Characteristics of Domestic Spent Nuclear Fuels for Long Term Dry Storage", Nucl. Eng. Technol., 45(3), 377-384 (2013). https://doi.org/10.5516/NET.06.2012.082
- J. Kim, D. Kook, J. Sim, and Y. Kim, "Review on Spent Nuclear Fuel Performance and Degradation Mechanisms Under Long-term Dry Storage", J. Nucl. Fuel Cycle Waste Technol., 11(4), 333-349 (2013). https://doi.org/10.7733/JNFCWT-K.2013.11.4.333
- T.E. Michener, J.M. Cuta, D.R. Rector, and H.E. Adkins, Jr. COBRA-SFS: A Thermal-Hydraulic Analysis Code for Spent Fuel Storage and Transportation Casks - Cycle 4, Pacific Northwest National Laboratory Report, PNNL-24841 (2015).
- M.A. McKinnon, T.E. Michener, M.F. Jensen, and G.R. Rodman. Testing and Analyses of the TN-24P PWR Spent-Fuel Dry Storage Cask Loaded With Consolidated Fuel, Electric Power Research Institute Report, EPRI NP-6191 (1989).
- J.M. Creer, T.E. Michener, M.A. McKinnon, J.E. Tanner, E.R. Gilbert, D.A. Dziadosz, E.V. Moore, D.H. Schoonen, and M.F. Jensen. The TN-24P PWR Spent-Fuel Storage Cask: Testing and Analyses, Electric Power Research Institute Report, EPRI NP-5128 (1987).
- K.J. Geelhood, W.G. Luscher, P.A. Raynaud, and I.E. Porter. FRAPCON-4.0: A Computer Code for the Calculation of Steady-State, Thermal-Mechanical Behavior of Oxide Fuel Rods for High Burnup, Pacific Northwest National Laboratory Report, PNNL-19418, Vol.1 Rev.2 (2015).
- F. Feria, L.E. Herranz, and J. Penalva, "On the Way to Enabling FRAPCON-3 to Model Spent Fuel Under Dry Storage Conditions: The Thermal Evolution", Ann. Nucl. Energy, 85, 995-1002 (2015). https://doi.org/10.1016/j.anucene.2015.07.017
- D.R. Olander, Fundamental Aspects of Nuclear Reactor Fuel Elements, 70-80, Technical Information Center, Office of Public Affairs, Energy Research and Development Administration, Springfield, Virginia (1976).
- K.M. Agbavon, A.R. Appadu, and M. Khumalo, "On the Numerical Solution of Fisher's Equation With Coefficient of Diffusion Term Much Smaller Than Coefficient of Reaction Term", Advances in Difference Equations, 146, 1-33 (2019).
- J.C. Wagner, M.D. DeHart, and C.V. Parks. Recommendations for Addressing Axial Burnup in PWR Burnup Credit Analyses, U.S. Nuclear Regulatory Commission Report, NUREG/CR-6801 (2003).