References
- J. L. Snelgrove, G. L. Hofman, M. K. Meyer, C. L. Trybus, T. C. Weincek, "Development of Very-High Density Low Enriched Uranium Fuels," Nucl. Eng. Des., 178, pp 119-126 (1997). https://doi.org/10.1016/S0029-5493(97)00217-3
- M. K. Meyer, T. C. Wiencek, S. L. Hayes, and G. L. Hofman, "Irradiation Behavior of U6Mn-Al Dispersion Fuel Elements," J. Nucl. Mater., 278, pp. 358-363 (2000). https://doi.org/10.1016/S0022-3115(99)00280-9
- G. L. Hofman, R. F. Domogala, and G. L. Copeland, "Irradiation Behavior of Low-Enriched U6Fe-Al Dispersion Fuel Elements," J. Nucl. Mater., 150 pp. 238-243 (1987). https://doi.org/10.1016/0022-3115(87)90079-1
- J. A. Horak, J. A. Reuscher and D. J. Sasmor, "Operating Experience with Uranium-Molybdenum Fuel in Pulsed Reactors," Symposium on Materials Performance in Operating Nuclear Systems, Ames, Iowa, August (1973).
- E. B. Baumeister, and J. D. Wilde, "Selection of the Piqua OMR Fuel Element," report NAA-SR-4239, Atomics International (1960).
- M. H. Binstock, "Fuel Element Development for Piqua OMR," report NAA-SR-5119, Atomics International (1960).
- S. A. Cottrell, E Edmonds, P. Higginson, and W. Oldfield, "Development and Performance of Dounreay Fast Reactor Metal Fuel," Proceedings of the Third U. N. International Conference on the Peaceful Uses of Atomic Energy, Geneva, A/Conf 28/P/150 (1964).
- A. A. Shoudy, W. E. McHugh and M. A. Silliman, "The Effect of Irradiation Temperature and Fission Rate on the Radiation Stability of Uranium-10 wt% Molybdenum Alloy," Radiation Damage in Reactor Materials, International Atomic Energy Agency, Vienna, pp. 133-162 (1963).
- A. Savchenko, A. Vatulin, I Konovalov, A. Morozov, V. Sorokin, S. Maranchak, "Fuel of Novel generation for PWR and as Alternative to MOX fuel," Energy Conversion and Management. 51, pp. 1826-1833 (2010). https://doi.org/10.1016/j.enconman.2010.01.027
- "Development status of metallic, dispersion and non-oxide advanced and alternative fuels for power and research reactors," International Atomic Energy Agency, IAEA-TECDOC-1374 (2003).
- R. M. Willard and A. R. Schmitt, "Irradiation Swelling, Phase Reversion and Intergranular Cracking of U-10wt%Mo Fuel Alloy", Atomics International report NAA-SR-8956 (1964).
- H. A. Saller, F. A. Rough, and A. A. Bauer, "Transformation Kinetics of Uranium-Molybdenum Alloys," United States Atomic Energy Commission report BMI-957 (1954).
-
R. F. Hills, B. R. Butcher, J. A. Heywood, "A study of the effect of cooling rate on the decomposition of the
${\gamma}$ -phase in uranium-low molybdenum alloys," J. Less Common Metals, 3:2, pp. 155-169 (1961). https://doi.org/10.1016/0022-5088(61)90006-6 -
R. F. Hills, B. W. Howlett, B. R. Butcher, "Further studies on the decomposition of the
${\gamma}$ phase in uranium-low molybdenum alloys," J. Less Common Metals, 5:5, pp. 369-373 (1963). https://doi.org/10.1016/0022-5088(63)90050-X - B. W. Howlett, A. J. Eycott, I. K. Kang, D. R. F. West, "The kinetics of the isothermal decomposition of a gamma-phase uranium - 6 atomic % molybdenum alloy," J. Nucl. Mate.s, 9:2, pp. 143-154 (1963). https://doi.org/10.1016/0022-3115(63)90130-2
-
G. Ostberg, M. Moller, B. Schonntng-Christiansson, "Metallographic study of the transformation of
${\gamma}$ phase into (${\alpha}+{\gamma}{\prime}$ ) phases in a U-1.6 wt% Mo alloy," J. Nucl. Mater., 10:4, pp. 329-338 (1963). https://doi.org/10.1016/0022-3115(63)90184-3 - P. E. Repas, R. H. Goodenow, and R. F. Hehemann, "Transformation Characteristics of U-Mo and U-Mo-Ti Alloys," Trans. Am. Soc. Metals, 13:1 (1964) pp. 150-63
-
G. Ostberg, B. Lehtinen, "The
${\alpha}+{\gamma}{\prime}$ ordering reaction during isothermal transformation of${\gamma}$ in a U-1.6 wt% Mo alloy," J. Nucl. Mater., 13:1 (1964) pp. 123-124 https://doi.org/10.1016/0022-3115(64)90078-9 - Y. Goldstein and A. Bar-Or, J. Inst. Met., Vol. 95, (1967) pp. 17-21
- C. W. Tucker, "Discussion on the Constitution of Alloys by C. L. Pfeil in the Journal Journal of the Institute of Metals, 77: pp. 553-570 (1950)," Report AECD-3092, United States Atomic Energy Commission (1951).
- H. A. Saller, F. A. Rough, and D. A. Vaughan, "The Constitution Diagram of Uranium-Rich Uranium-Molybdenum Alloys," report BMI-72, United States Atomic Energy Commission (1951).
- H. A. Saller, F. A. Rough, and D. C. Bennett, "The Constitution Diagram of Molybdenum-Rich Uranium-Molybdenum Alloys," report BMI-730, U.S. Atomic Energy Commission (1952)
- H. A. Saller, and F. A. Rough, "Alloys of Uranium with Zirconium, Chromium, Columbium Vanadium, and Molybdenum," report BMI-752, United States Atomic Energy Commission (1952).
- O. S. Ivanov, T. A. Badaeva, R. M. Sofronova, V. B. Kishenevshii, N. P. Kushnir, and O. S. Ivanov, "Phase Diagrams of Uranium Alloys," Amerind Publishing Co. Pvt. Ltd., New Delhi, India (1983).
-
A. E. Dwight, "The uranium-molybdenum equilibrium diagram below
$900^{\circ}C$ ," J. Nucl. Mater., 2, pp. 81-87 (March 1960). https://doi.org/10.1016/0022-3115(60)90028-3 - B. W. Howlett, A. J. Eycott, I. K. Kang, D. R. F. West, "The kinetics of the isothermal decomposition of a gammaphase uranium - 6 atomic % molybdenum alloy," J. Nucl. Mater., 9, pp. 143-154 (July1963). https://doi.org/10.1016/0022-3115(63)90130-2
- P. E. Repas, R. H. Goodenow, and R F Hehemann, "Transformation Characteristics of U-Mo and U-Mo-Ti Alloys," Trans. Am. Soc. Metals, 13, pp. 150-63 (1964).
- Y. Goldstein and A. Bar-Or," DecompositionKinetics of Gamma Phase Uranium Alloys Containing 8, 10.8, and 14.3 wt% Molybdenum," J. Inst. Met., 95, pp. 17-21 (1967).
- R. J. Van Thyne, D. J. McPherson, "Transformation Kinetics of Uranium-Molybdenum Alloys," Trans. ASM 49, pp. 598-621 (1957).
- R. J. Van Thyne, Uranium Alloys Newsletter, 13 (1955).
-
G. Cabane, G. Donze, "Stabilisation de la Phase
${\gamma}$ dans les Alliages Ternaires a Base D'Uranium-Molybdene," J. Nuc. Mat., 4, pp. 364-73 (1959). - F. Giraud-Heaud, J. Guillaumin, "Formationde Phases de Transition Dans L'Alliage U-7.5Nb-2.5Zr," Acta. Met. 21 1243-52 (1973) https://doi.org/10.1016/0001-6160(73)90165-X
- D. A. Lopes, T. A. G. Restivo, A. F. Padilha, J. Nucl. Mater., 440, pp. 304-309 (2013). https://doi.org/10.1016/j.jnucmat.2013.05.014
- C. A. W. Peterson, R. R. Vandervoot, The Properties of a Metastable Gamma-phase Uranium Based Alloy: U-7.5Nb-2.5Zr, Lawrence Radiation Laboratory report UCRL-7869, University of California, Livemore (1964).
- R. M. Willard and A. R. Schmitt, "Irradiation Swelling, Phase Reversion and Intergranular Cracking of U-10wt%Mo Fuel Alloy", Atomics International report NAA-SR-8956 (1964).
- A. A. Shoudy, W. E. McHugh and M. A. Silliman, "The Effect of Irradiation Temperature and Fission Rate on the Radiation Stability of Uranium-10 wt% Molybdenum Alloy," Radiation Damage in Reactor Materials, pp. 133-162 (1963).
- M. K. Meyer, G. L. Hofman, S. L. Hayes, C. R. Clark, T. C. Wiencek, J. L. Snelgrove, R. V. Strain, K-H Kim, "Lowtemperature irradiation behavior of uranium- molybdenum alloy dispersion fuels," J. Nucl. Mater., 304, pp. 221-236 (2002). https://doi.org/10.1016/S0022-3115(02)00850-4
- A. Leenaers, S. Van den Berghe, E. Koonen, C. Jarousse, F. Huet, M. Trotabas, M. Boyard, S. Guillot, L. Sannen, M. Verwerft, J. Nucl. Mater., 335, pp 39-47 (2004). https://doi.org/10.1016/j.jnucmat.2004.07.004
- P. Lemoine, D. M. Wachs, Proceedings of the International Conference on Research Reactors: Safe Management and Effective Utilization Sydney, Australia, (2007).
- F. Huet, J. Noirot, V. Marelle, S. Dubois, P. Boulcourt, P. Sacristan, S. Naury, P. Lemoine, "Post Irradiation Examinations on UMo Full Sized Plate - IRIS2 Experiment," Transactions of the 9th International Topical Meeting on Research Reactor Fuel Management, Budapest, Hungary (2005).
- S.Van den Berghe, U. Parthoens, G. Cornelis, S. Leenaers E.Koonen, V. Kuzminov, C. Detavernier, "Swelling of U(Mo) dispersion fuel under irradiation-Non-destructive analyses of the SELNIUM plates" Journal of Nuclear Materials 442 (2013) 60-68. https://doi.org/10.1016/j.jnucmat.2013.08.020
- D. D. Keiser Jr., J-F Jue, A.B. Robinson, P. Medvedev, J. Gan, B.D. Miller, D.M. Wachs, G.A. Moore, C.R. Clark, M.K. Meyer, M.R. Finlay, "Effects of Irradiation on the Microstructure of U-7Mo Dispersion Fuel with Al-2Si Matrix," J. Nucl. Mater., 425 pp. 156-172 (2012). https://doi.org/10.1016/j.jnucmat.2012.01.013
- D. D. Keiser Jr, D.M. Wachs, M.K. Meyer, A.B. Robinson, P. Medvedev, G.A. Moore, "Microstructural Analysis of Irradiated U-Mo Fuel Plates: Recent Results," Transactions of the 16th International Topical Meeting on Research Reactor Fuel Management, Prague, Czech Republic, March 18-22, (2012).
- G. L. Hofman and M. K. Meyer, "Progress in Irradiation Performance of Experimental Uranium-Molybdenum Dispersion Fuel", Proceedings of the International Meeting on Reduced Enrichment for Research and Test Reactors, Bariloche, Argentina, November 3-8 (2002).
-
I. G. Prokofiev, T. C. Wiencek, B. D. Merkle, E. O. Carney, "Monolithic Fuel Plates Diffusion Bonded by
$Electroconsolidation^{(R)}$ Process Technology", Proceedings of the International Meeting on Reduced Enrichment for Research and Test Reactors, Boston, Massachusetts, USA, November 6-10 (2005). - C. Jarousse, P. Lemoine, P. Boulcourt , A. Röhrmoser, and W. Petry, "Monolithic UMo Full Size Prototype Plates for IRIS V Irradiation," Transactions of the 11th International Topical Meeting on Research Reactor Fuel Management, Lyon, France, March 11-15 (2007).
- D. E. Burkes, D. E, N. P. Hallinan, K. L. Shropshire, P. B. Wells, "Effects on Applied Load on 6061-T6 Aluminum Joined Employing a Novel Friction Bonding Process," Metal. Mater. Trans., 39, pp. 2852-2861 (2008). https://doi.org/10.1007/s11661-008-9644-9
- J. F.Jue, etal, "Fabrication of Monlithic RERTR Fuels by Hot Isostatic Pressing;" Journal of Nuclear Technology, vol 72, No,2, pg.204 210, Nov 2010
- G. A. Moore, M.C. Marshall, "Co-rolled U-10Mo/Zirconium Barrier-Layer Monolithic Fuel Foil Fabrication Process," Idaho National Laboratory report INL/EXT-10-17774 (2010).
- J. F. Jue, D. D. Keiser, C. R. Breckenridge, G. A. Moore, M. K. Meyer, "Microstructural Characteristics of HIPbonded Monolithic Nuclear Fuels with a Diffusion Barrier," J. Nucl. Mater., 448, pp. 250-258 (2014). https://doi.org/10.1016/j.jnucmat.2014.02.004
- A. B. Robinison and M. R. Finlay, "RERTR-7 Post Irradiation Examination (PIE) Letter Report," Idaho National Laboratory, Idaho National Laboratory report INL/EXT-07-13271 (2007).
- D. D. Keiser Jr., A. B. Robinson, J.-F. Jue, P. Medvedev, D. M. Wachs, M. R. Finlay, "Microstructural development in irradiated U-7Mo/6061 Al alloy matrix dispersion fuel," J. Nucl. Mater., 393, pp. 311-320 (2009). https://doi.org/10.1016/j.jnucmat.2009.06.018
- A. Leenaers, S. Van den Berghe, J. Van Eyken, E. Koonen, F. Charollais, P. Lemoine, Y. Calzavara, H. Guyon , C. Jarousse, D. Geslin, D. Wachs, D. Keiser, A. Robinson, G. Hofman, Y. S. Kim, "Microstructural evolution of U(Mo)-Al(Si) dispersion fuel under irradiation - Destructive analyses of the LEONIDAS E-FUTURE plates," J. Nucl. Mater., 441, pp. 439-448 (2013). https://doi.org/10.1016/j.jnucmat.2013.06.027
- D. L. Porter, "Zry Clad Experiment Report," Idaho National Laboratory report INL/EXT-12-27273 (2012).
- O. A. Golosov, S. A. Averin, M. S. Lyutnikov, et al, "Electronmicroscopic studies of barrier coatings on U-Mo fuel irradiation to 60% burnup," Atomic Energy, 110, pp. 486-494
-
O. S. Ivanov, G. N. Bagrov, "Isothermal cross sections of the triple system uranium-molybdenum-zirconium at
$1000^{\circ}C-625^{\circ}C$ .," Struct. Alloys Certain Systems Cont. Uranium Thorium 1963:131 -
O. S. Ivanov, G. N. Bagrov. "Isothermal cross sections at
$600^{\circ}C$ ,$575^{\circ}C$ , and$500^{\circ}C$ , polythermal sections, and the phase diagram of the triple system Uranium molybdenumzirconium." Struct. Alloys, Certain Systems Cont. Uranium Thorium 1963:154 - K. Huang, Y. Park, D. Keiser, and Y. Sohn, "Interdiffusion Between Zr Diffusion Barrier and U-Mo Alloy," J. Phase Equil. Diffus., 33, pp. 443-449 (2013).
- E. Perez, B. Yao, D. D. Keiser Jr, and Y. H. Sohn, "Microstructural analysis of as processed U-10 wt.% Mo monolithic fuel plate in AA6061 matrix with Zr diffusion barrier," J. Nucl. Mater., 402, pp. 8-14 (2010). https://doi.org/10.1016/j.jnucmat.2010.04.016
- G. V. Kidson, G. D. Miller, "A study of the interdiffusion of aluminum and zirconium," J. Nucl. Mater., 12, pp. 61-69 (1964). https://doi.org/10.1016/0022-3115(64)90108-4
- A. Laik, K. Bhanumurthy, G. B. Kale, "Intermetallics in the Zr-Al diffusion zone," Intermetallics, 12, pp. 69-74 (2004). https://doi.org/10.1016/j.intermet.2003.09.002
-
J. Dickson, L. Zhou, A. Ewh, M. Fu, D. Keiser, Jr., and Y. Sohn "Interdiffusion and Reaction between Zr and Al Alloys from 450 to
$625^{\circ}C$ ," Intermetallics, 49 pp. 154-162 (2014). https://doi.org/10.1016/j.intermet.2013.12.012 - G. L. Hofman, L .C. Walters, T. H. Bauer, "Metallic Fast Reactor Fuels," Prog. Nucl. Ener., 31, pp. 83-110 (1997). https://doi.org/10.1016/0149-1970(96)00005-4
- J. Gan, D. D. Keiser, B. D. Miller, A. B. Robinson, J. F. Jue, P. Medvedev, D. M. Wachs, "TEM Characterization of U-7Mo/Al-2Si Dispersion Fuel Irradiated to Intermediate and High Fission Densities," J. Nucl. Mater., 424, pp. 43-50 (2012). https://doi.org/10.1016/j.jnucmat.2012.02.001
- J. S. Van den Berhe, W. Van Renterghem, A. Leenaers, "Transmission Electron Microscopy Investigation of Irradiated U-7wt.% Mo Dispersion Fuel," J. Nucl. Mater., 375, pp. 340-346 (2008). https://doi.org/10.1016/j.jnucmat.2007.12.006
- J. Rest, "Evolution of fission-gas-bubble-size distribution in recrystallized U-10Mo nuclear fuel," J. Nucl. Mater., 407 pp. 55-58 (2010). https://doi.org/10.1016/j.jnucmat.2010.07.009
- Y. S. Kim, G. L. Hofman, J. S. Cheon, "Recrystallization and swelling of U-Mo fuel during irradiation," Transactions of the 16th International Topical Meeting on Research Reactor Fuel Management, Prague, Czech Republic, March 18-22, (2012).
- Y. S. Kim, G. L. Hofman, "Fission Product Induced Swelling of U-Mo Alloy Fuel", J. Nucl. Mater., 419, pp. 291-301 (2011). https://doi.org/10.1016/j.jnucmat.2011.08.018
- D. Keiser, Jr., et al., "SEM Characterization of the High Burn-up Microstructure of U-7Mo Alloy", Transactions of the 18th International Topical Meeting on Research Reactor Fuel Management, Ljubljana, Slovenia, March 30-April 3 (2014).
- J. Gan, et al., "TEM Characterization of High Burn-up Microstructure of U-7Mo Alloy", Transactions of the 18th International Topical Meeting on Research Reactor Fuel Management, Ljubljana, Slovenia, March 30-April 3 (2014).
- Y. S. Kim, G. L. Hofman, J. S. Cheon, A. B. Robinson, and D. M. Wachs "Fission Induced Swelling and Creep in Uranium Molybdenum Alloy Fuel," J. Nucl. Mater., 437, pp. 37-46 (2013). https://doi.org/10.1016/j.jnucmat.2013.01.346
- A. Leenaers, et. al., "Microstructure of U3Si2 Fuel Plates Submitted to a High Heat Flux," J. Nucl. Mater., 327, pp. 121-129 (2004). https://doi.org/10.1016/j.jnucmat.2004.01.025
- Z. Hashin and S. Shtrikman, "A Variational Approach to the Theory of the Effective Magnetic Permeability of Multiphase Materials," J. Applied Physics, 33, pp. 3125-3131 (1962). https://doi.org/10.1063/1.1728579
Cited by
- Neutron and hard X-ray diffraction studies of the isothermal transformation kinetics in the research reactor fuel candidate U–8 wt%Mo vol.49, pp.3, 2016, https://doi.org/10.1107/S1600576716005744
- Observed Changes in As-Fabricated U-10Mo Monolithic Fuel Microstructures After Irradiation in the Advanced Test Reactor vol.69, pp.12, 2017, https://doi.org/10.1007/s11837-017-2564-7
- A Rate-Theory–Phase-Field Model of Irradiation-Induced Recrystallization in UMo Nuclear Fuels vol.69, pp.12, 2017, https://doi.org/10.1007/s11837-017-2611-4
- Microstructure characterization and phase field analysis of dendritic crystal growth of γ-U and BCC-Mo dendrite in U–33 at.% Mo fast reactor fuel pp.2044-5326, 2017, https://doi.org/10.1557/jmr.2017.425
- Deterministic Phonon Transport Predictions of Thermal Conductivity in Uranium Dioxide With Xenon Impurities vol.140, pp.5, 2018, https://doi.org/10.1115/1.4038554
- Characterization of Plasma-Sprayed Zirconium Coatings on Uranium Alloy Using Neutron Diffraction pp.1544-1016, 2019, https://doi.org/10.1007/s11666-018-0804-1
- Phase Transformations and Microstructural Development in the U-10 Wt Pct Mo Alloy with Varying Zr Contents After Heat Treatments Relevant to the Monolithic Fuel Plate Fabrication Process pp.1543-1940, 2019, https://doi.org/10.1007/s11661-018-4987-3
- Effects of Rolling Speed and Reduction on Rolling Simulation Results of Monolithic Fuel Plates vol.19, pp.6, 2018, https://doi.org/10.1515/ijnsns-2017-0155