• 대한영상의학회지
• /
• 제85권3호
• /
• pp.488-504
• /
• 2024

정상 변이란 일반적으로 무증상이며 우연히 발견되는 영상 소견을 의미하며, 병적 상태와 유사한 소견을 보일 수 있다. 소아 뼈의 정상 변이를 인지하기 위해서는 장관 골 및 이차 골화 중심의 발달 과정에 대한 이해가 필요하다. 정상 변이의 다양한 영상의학적 소견에 익숙해진다면 불필요한 추가 영상 검사 및 잘못된 진단과 치료를 방지할 수 있다. 본 종설에서는 성장하는 소아의 뼈에서 보이는 정상 변이들의 특징적인 영상 소견과 이를 병적 상태와 구별하기 위한 방법들에 대해서 논의하고자 한다.

• 한국해안·해양공학회논문집
• /
• 제22권4호
• /
• pp.279-285
• /
• 2010

해안 구조물의 신뢰성 설계과정에서 조위자료를 정규분포로 가정하여 설계를 수행하는 경우가 빈번하다. 그러나 조위 자료는 쌍봉형 정규 분포 형태를 따르기 때문에 설계과정에서 등가 정규분포 개념에 근거하여 등가평균 및 등가표준편차를 추정하게 되며, 이 과정에서 정규분포를 가정한 경우의 추정 평균 및 표준편차와는 다른 추정오차가 발생하게 된다. 본 연구에서는 쌍봉형 정규분포 형태를 따르는 조위에 대하여 등가평균 및 등가표준편차를 추정하고, 정규분포를 가정하여 추정한 평균과 표준편차와 비교하였다 그 결과, 등가 매개변수 추정오차는 조위조건과 조위의 크기에 따라 크게 변하고 있는 것으로 파악되었다. 인천의 경우, ${\pm}400cm$ 조건에서 등가평균 및 등 가표준편차 추정편차는 각각 100 cm 이상, 80~100 cm 정도로 파악되었으며, 조석이 약한 포항에서는 ${\pm}60cm$ 조건에서 모두 2~4 cm 정도의 작은 추정 편차를 보이고 있는 것으로 파악되었다.

• 한국약용작물학회지
• /
• 제19권2호
• /
• pp.103-110
• /
• 2011

This study was performed to enhance anticancer activities of Lithospermum erythrorhizon by eluting high amount of shikonin through ultra high pressure process. Extraction yield was increased up to 5~10% by ultra high pressure process, compare to the normal extraction processes such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts ($1.0{\mu}g/m{\ell}$) from ultra high pressure process was showed the lowest cytotoxicity 13.4% for human lung cell (HEL299). The anticancer activities showed 80~85% by adding $1.0{\mu}g/m{\ell}$ of the extracts from ultra high pressure process in several cancer cell lines such as AGS, Hep3B, MCF-7 and HeLa cells. Among them, MCF-7 cell of the endocrine system was highest inhibited than other cells. The anticancer activities of the extracts from ultra high pressure extraction process showed 10~15%, which was higher than the extracts from normal extraction processes. From HPLC analysis of the extracts, the contents of shikonin in the extracts from ultra high pressure process was 11.42% (w/w), which was 20% higher than others. This results indicate that ultra high pressure process could increase the extraction yield of shikonin and other contents, which resulted in higher anticancer activities.

• 기술사
• /
• 제21권4호
• /
• pp.19-32
• /
• 1988

Whereas is non-symmetrical distribution manufacturing process the traditional X-chart by Shewhart is not plotted relatively on the central line but plotted on the skew of upper-hand side or lower-hand side. That is to say, for the purpose of producing either upper-specification-oriented items or lower-specification-oriented items, and when we carry out tighter control so as to have them pass only its specifications, the distribution shape naturally has a non-normal distribution. In the Shewhart X-chart, which is the most widely used one in Korea, such skewed distributions make tile plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such short comings is non-normally distributed processes, a distribution-free type of confidence interval can be used, which should be haled on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for non-normal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, and Truncated-normal distributions, may be easily analyzed. To enhance this improvement, I proved the property of practical applications of control chart method by comparing and analyzing the case studies of practical application of special purpose control chart method, and also by introducing the new designed median control chart.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.248-258
• /
• 1992

Three-dimensional rigid-plastic finite element formulation based on the membrane theory was described and a computer program for large deformation analysis was developed. In the formulation, normal and planar anisotropy of sheet material and rotation of the principal axes of anisotropy was taken into consideration. Sheet metal was assumed to be rigid-plastic material obeying Hill's quadratic yield criterion and its associated flow rule. Deep drawing process, as a preliminary test, for normal anisotropic material was analyzed in order to examine the validity of developed finite element program. The results were consistent with the existing finite element solutions or experimental data. The present study was mainly concerned with the influence of planar anisotropy on deformation behaviour. Finite element analysis and experiment were carried out for the whole process of deep drawing of planar anisotropic material. The computational and experimental results on the shape of ear, strain distribution and punch load were in good agreement.

• International Journal of Aeronautical and Space Sciences
• /
• 제5권2호
• /
• pp.1-8
• /
• 2004

Real-Time Kinematic GPS positioning is widely used for many applications.Resolving ambiguities is the key to precise positioning. Integer ambiguity resolution isthe process of resolving the unknown cycle ambiguities of double difference carrierphase data as integers. Two important issues of resolving are efficiency andreliability. In the conventional search techniques, we generally used chi-squarerandom variables for decision variables. Mathematically, a chi-square random variableis the sum of mutually independent, squared zero-mean unit-variance normal(Gaussian) random variables. With this base knowledge, we can separate decisionvariables to several normal random variables. We showed it with related equationsand conceptual diagrams. With this separation, we can improve the computationalefficiency of the process without losing the needed performance. If we averageseparated normal random variables sequentially, averaged values are also normalrandom variables. So we can use them as decision variables, which prevent from asudden increase of some decision variable. With the method using averaged decisionvalues, we can get the solution more quicklv and more reliably.To verify the performance of our proposed algorithm, we conducted simulations.We used some visual diagrams that are useful for intuitional approach. We analyzedthe performance of the proposed algorithm and compared it to the conventionalmethods.

• 치과방사선
• /
• 제26권2호
• /
• pp.7-17
• /
• 1996

This study was performed to determine the postitional relationships of two lobes of parenchyma and to analysis the anatomical feature and its variations of duct on the panoramic views of the normal parotid glands in adults. Materials included 66 panoramic views and anterioposterior views of sialograms of selected persons and the radiograms of the gland experimentally reproduced on dry skull with lead foil and the reference images of computed tomograms of normal persons. Results were as follows : 1. On panoramic view of sialogram, the superficial lobe was revealed with totally being superimposed with the mandibular ramus and condyle and its tail portion superimposed with mandibular angle area, the deep lobe was revealed between the posterior border of the ramus and the mastoid process, and the isthmus was begin from the marked furcation off main duct and superimposed partially with the medial part of the deep lobe. 2, The mean length and the lateral extension of parenchyma was 63.18±8.05mm and 21.78±4.87mm respectively on panoramic view and showed no statistical relationship between them. 3. The main duct was generally perpendicular to the posterior border of ramus at middle portion and its configurations revealed 57,58％ of curvilinear type, 21.21％ sigmoid type, 15.15％ reverse sigmoid type. 4, The interlobular ducts of the deep lobe showed relatively well defined features between the mandibular ramus and the mastoid process.

• Korean Journal of Mathematics
• /
• 제18권3호
• /
• pp.213-227
• /
• 2010

Convergence of an implicit iterative process is investigated for nonexpansive mappings. Strong and weak convergence theorems of common fixed points of two finite families of nonexpansive mappings are established in the framework of Banach spaces.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.14-18
• /
• 2001

Rise in cutting force causes tool damage and worsens product quality resulting in machining accuracy deterioration. Especially, fragile material cutting brings about breakage of material and worsens product surface quality. In this study, we trace the locus of cutting force and examine the machined surface corresponding to the cutting force loci. and build up a monitoring system for deciding normal operation or not of cutting process.

• 대한수학회보
• /
• 제47권6호
• /
• pp.1259-1268
• /
• 2010

In this paper, we consider an implicit iterative process with errors for an in nite family of strict pseudocontractions. Strong convergence theorems are established in the framework of Banach spaces. The results presented in this paper improve and extend the recent ones announced by many others.