• 한국통신학회논문지
• /
• 제41권4호
• /
• pp.415-423
• /
• 2016

높은 PAPR(Peak-to-Average Power Ratio)은 HPA(High Power Amplifier) 비선형성에 의해 시스템의 성능을 열화 시키고, 스펙트럼의 OOB(Out-of-Band) 전력을 향상시키는 문제의 원인이 된다. 5세대 이동통신 시스템을 위한 후보변조기술로 UFMC(Universal Filtered Multi-Carrier) 및 FBMC(Filter Bank Multi-Carrier) 시스템이 있다. 본 논문에서는 PAPR 저감 기법으로 잘 알려진 DFT-s(Discrete Fourier Transform Spreading) 기법을 각 시스템에 적용하고, 비선형 HPA 환경에서 각각의 성능에 대하여 비교분석하였다. 우선, 본 논문에서는 OFDM(Orthogonal Frequency Division Multiplexing), UFMC, FBMC 시스템에 대해서 설명을 하며, 각 시스템에 DFT spreading 기법을 적용한 DFT-s-OFDM, DFT-s-UFMC, DFT-s-FBMC 시스템에 대해 설명한다. 본 논문에서는 비선형 모델로 Saleh 모델을 사용하였으며, 다양한 강도의 HPA 비선형성을 고려하여 시뮬레이션을 수행하였다. 시뮬레이션 결과, OFDM 및 UFMC 시스템의 경우 PAPR을 효과적으로 저감시킬 수 있으며, FBMC의 경우 PAPR 저감은 이루어지나 그 효과가 크지 않음을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1939_1941
• /
• 2009

The modulation quality of the RF transmitter in a wireless communication system usually affects system performance and it mostly depends on both a nonlinearity and a distortion, from the intermodulation products and the I/Q mismatch such as I/Q amplitude error and a local phase error, respectively. This paper focused on how much the error vector magnitude(EVM) which describes the modulation accuracy changes according to the variation of the I/Q mismatch components at I/Q modulator. For this work, the equation for the EVM including the I/Q mismatch components can be induced and calculated in accordance with the variation of the I/Q mismatch components. Consequently, the effect of I/Q mismatch components on the EVM, which is required in the transmitter specification of Personal Area Network, can be clearly analyzed.

• 대한수학회보
• /
• 제57권2호
• /
• pp.295-309
• /
• 2020

Loop transversal codes take an alternative approach to the theory of error-correcting codes, placing emphasis on the set of errors that are to be corrected. Hitherto, the loop transversal code method has been restricted to linear codes. The goal of the current paper is to extend the conceptual framework of loop transversal codes to admit nonlinear codes. We present a natural example of this nonlinearity among perfect single-error correcting codes that exhibit efficient domination in a circulant graph, and contrast it with linear codes in a similar context.

• 제어로봇시스템학회논문지
• /
• 제17권6호
• /
• pp.526-530
• /
• 2011

This paper presents a new fuzzy model-based design approach for waypoints-tracking control of nonlinear underwater vehicles (UUVs) on a horizontal plane. The waypoints-tracking control problem is converted into the stabilization one for the error model between the given nonlinear UUV and the waypoints. By using the sector nonlinearity, the error model is modeled in Takagi-Sugeno's form. We then derive stabilization conditions for the error model in the format of linear matrix inequality. A numerical simulation is provided to illustrate the effectiveness of the proposed methodology.

• 한국통신학회논문지
• /
• 제19권7호
• /
• pp.1224-1233
• /
• 1994

업링크와 다운링크 경로상에 각각 가산성 백색 가우스잡음이 존재하는 이동 위성 통신로에서 TWTA의 비성형성에 의한 BPSK신호와 QPSK신호의 오율성능을 조사하였따. 다운링크 경로상의 페이딩은 Rice분포를 한다고 가정하였다. Rice 분포에 대한 근사 이산 확률분포를 고전적인 모멘트 기법(CMT)을 이용하여 처음으로 유도하였다. 최종적으로 오율은 근사 이산 확률 분포와 Gauss Quadrature Formula를 이용하여 계산하였다.

• 반도체디스플레이기술학회지
• /
• 제3권2호
• /
• pp.41-46
• /
• 2004

This paper proposes a robust discrete time Kalman filter (RDKF) for the dynamic compensation of nonlinearity in a homodyne laser interferometer for high-precision displacement measurement and in real-time. The interferometer system is modeled to reduce the calculation of the estimator. A regulator is applied to improve the robustness of the system. An estimator based on dynamic modeling and a zero regulator of the system was designed by the authors of this study. For real measurement, the experimental results show that the proposed interferometer system can be applied to high precision displacement measurement in real-time.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.2752-2759
• /
• 1996

This paper presents crack growth analysis approach on the basis of neural networks, a branch of cognitive science to high temperature low cycle fatigue that shows strong nonlinearity in material behavior. As the number of data patterns on crack growth increase, pattern classification occurs well and two point representation scheme with gradient of crack growth curve simulates crack growth rate better than one point representation scheme. Optimal number of learning data exists and excessive number of learning data increases estimated mean error with remarkable learning time J-da/dt relation predicted by neural networks shows that test condition with unlearned data is simulated well within estimated mean error(5%).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계학술대회논문집
• /
• pp.760-763
• /
• 2005

Optimum design of the tooth surface for the reduction of transmission error is very difficult to determine analytically due to nonlinearity of transmission error under the several load condition. The design of tooth surface that can give a low noise under the various load condition is very important. Therefore, this study proposes the method to determine the optimal lead curve and robust design of the tooth surface by using the response surface method. To do so, the design variables are selected by a screening experiment. Then the fitted regression model Is built with the check of the usefulness of the model. The model with constraints is solved to obtain the optimum values for the lead curve and the robust design fur the tooth surface.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.354-359
• /
• 2003

In this paper, we consider the problem of designing a simple learning variable structure system for repeatable tracking control of robot manipulators. We combine a variable structure control law as the robust part for stabilization and a feedforward learning law as the intelligent part for nonlinearity compensation. We show that the tracking error asymptotically converges to zero. Finally, we give computer simulation results in order to show the effectiveness of our method.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2003년도 하계학술대회 논문집
• /
• pp.238-241
• /
• 2003

This paper presents a nonlinear least squares decision feedback equalizer Bilinear systems are attractive because of the ability to approximate a large class of nonlinear systems efficiently. The nonlinearity of channel is modeled using a bilinear system. The algorithms are derived by using the QR decomposition for minimization covariance matrix of prediction error by applying Givens rotation to the bilinear model. Result of computer simulation experiments that compare the performance of the bilinear DFE to two other DFE's in eliminating the intersymbol interference caused by a nonlinear channel are presented In the paper.