• Journal of Electrochemical Science and Technology
• /
• 제11권3호
• /
• pp.220-237
• /
• 2020

Modern electrochemical energy devices involve generation and reduction of fuel gases through electrochemical reactions of water splitting, alcohol oxidation, oxygen reduction, etc. Initially, these processes were executed in the presence of noble metal-based catalyst that showed low overpotential and high current density. However, its high cost, unavailability, corrosion and related toxicity limited its application. The search for alternative with high stability, durability, and efficiency led scientists towards carbon nanoparticles supported catalysts which has high surface area, good electrical conductivity, tunable morphology, low cost, ease of synthesis and stability. Carbon nanoparticles are classified into two groups based on morphology, one and zero dimensional particles. Carbon nanoparticles at zero dimension, denoted as carbon dots, are less used carbon support compared to other forms. However, recently carbon dots with improved electronic properties have become popular as catalyst as well as catalyst support. This review focused on the recent advances in electrocatalytic activities of carbon dots. The mechanisms of common electrocatalytic reactions and the role of the catalysts are also discussed. The review also proposed future developments and other research directions to overcome current limitations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.126-126
• /
• 2014

Label-free biomolecular assay based localized surface plasmon resonance (LSPR) of noble metal nanoparticles enables simple and rapid detection with the use of simple equipment. Nanosized metal nanoparticles exhibit a strong absorption band when the incident light frequency is resonant with the collective oscillation of the electrons, which is known as the LSPR. Here we demonstrate localized surface plasmon resonance (LSPR) substrates such as plasmonic Au nanodisks fabricated by a nanoimprinting process and gold nanorod-immobilized surfaces and their applications to highly sensitive and/or label-free biosensing. To increase detection sensitivity various bioreceptors weree designed. A single chain variable fragment (scFv) was used as a receptor to bind C-reactive protein (CRP). The results of this effort showed that CRP in human serum could be quantitatively detected lower than 1 ng/ml. Aptamers, which were immobilized on gold nanorods, were used to detect mycotoxins. The specific binding of ochratoxin A (OTA) to the aptamer was monitored by the longitudinal wavelength shift of LSPR peak in the UV-Vis spectra resulting from the changes of local refractive index near the GNR surface induced by accumulation of OTA and G-quadruplex structure formation of the aptamer. According to our results, OTA could be quantitatively detected lower than 1 nM level. Additionally, aptamer-functionalized GNR substrate was quite robust and can be regenerated many times by rinsing at 70 OC to remove bound target. During seven times of washing steps, the developed OTA sensing system could be reusable. Moreover, the proposed biosensor exhibited selectivity over other mycotoxins with an excellent recovery for detection in grinded corn samples, suggesting that the proposed LSPR based aptasensor plays an important role in label-free detection of mycotoxins.

• Environmental Engineering Research
• /
• 제16권2호
• /
• pp.81-90
• /
• 2011

Different weight percentages of Ag, Pt, and Au doped nano $TiO_2$ were synthesized using the acetic acid hydrolyzed sol-gel method. The crystallite phase, surface morphology combined with elemental composition and light absorption properties of the doped nano $TiO_2$ were comprehensively examined using X-ray diffraction (XRD), $N_2$ sorption analysis, transmission electron microscopic (TEM), energy dispersive X-ray, and DRS UV-vis analysis. The doping of noble metals stabilized the anatase phase, without conversion to rutile phase. The formation of gold nano particles in Au doped nano $TiO_2$ was confirmed from the XRD patterns for gold. The specific surface area was found to be in the range 50 to 85 $m^2$/g. TEM images confirmed the formation a hexagonal plate like morphology of nano $TiO_2$. The photocatalytic activity of doped nano $TiO_2$ was evaluated using 4-chlorophenol as the model pollutant. Au doped (0.5 wt %) nano $TiO_2$ was found to exhibit higher photocatalytic activity than the other noble metal doped nano $TiO_2$, pure nano $TiO_2$ and commercial $TiO_2$ (Degussa P-25). This enhanced photocatalytic activity was due to the cathodic influence of gold in suppressing the electron-hole recombination during the reaction.

• 한국재료학회지
• /
• 제21권10호
• /
• pp.525-531
• /
• 2011

Two dimensional (2D) arrays of noble metal nanoparticles are widely used in the sensing of nanoscale biological and chemical events. Research in this area has sparked considerable interest in many fields owing to the novel optical properties, e.g., the localized surface plasmon resonance, of these metallic nanoarrays. In this paper, we report successes in fabricating 2D arrays of gold nano-islands using nanosphere lithography. The reproducibility and the effectiveness of the nano-patterning method are tested by means of spin coating and capillary force deposition. We found that the capillary force deposition method was more effective for nanospheres with diameters greater than 600 nm, whereas the spin coating method works better for nanospheres with diameters less than 600 nm. The optimal deposition parameters for both methods were reported, showing about 80% reproducibility. In addition, we characterize gold nano-island arrays both geometrically with AFM as well as optically with UV-VIS spectrometry. The AFM images revealed that the obtained nano-arrays formed a hexagonal pattern of truncated tetrahedron nano-islands. The experimental and theoretical values of the geometric parameters were compared. The 2D gold nano-arrays showed strong LSPR in the absorption spectra. As the nano-islands increased in size, the LSPR absorption bands became red-shifted. Linear dependence of the plasmon absorption maximum on the size of the gold nano-islands was identified through the increment in the plasmon absorption maximum rate for a one nanometer increase in the characteristic length of the nano-islands. We found that the 2D gold nano-arrays showed nearly seven-fold higher sensitivity of the absorption spectrum to the size of the nano-islands as compared to colloidal gold nano-particles.

• 전기화학회지
• /
• 제23권4호
• /
• pp.97-104
• /
• 2020

전기 물 분해 기술 중 주요 과제 중 하나는 귀금속의 Ir과 Ru 기반의 촉매를 대체할 수 있는 고성능, 저비용의 산소 발생 반응 (OER) 촉매를 개발하는 것이다. 본 연구에서는 CoSO₄와 Fe(NO₃)₃ 수용액을 1차 가열 후 KNO₃와 NaOH 추가 반응을 이용한 침전법을 이용하여 OER 촉매로 사용 가능한 역스피넬 구조의 약 44 nm 크기를 갖는 CoFe₂O₄ 나노 입자를 합성하였다. CoFe₂O₄ 나노 입자의 합성 시간을 조절하여 입자 및 결정립 크기를 제어하였다. CoFe₂O₄ 나노 입자의 합성 시간이 6시간일 때, 높은 전도성과 전기 화학 표면적을 가졌다. 이 CoFe₂O₄ (6 h)는 전류 밀도 10 mA/㎠의 과전압 및 Tafel slope는 각각 395 mV 및 52 mV/dec으로 나타났다. 또한, 이 촉매는 10 mA/㎠에서 18시간 동안 우수한 내구성을 나타냈다.

• 자원리싸이클링
• /
• 제20권2호
• /
• pp.67-73
• /
• 2011

연료전지 폐스택으로부터 백금을 회수하여 재사용하기 위하여 백금의 농도, pH, 환원제, 분산제의 영향을 살펴본 결과 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm, 10분 조건에서 최적 백금 나노 입자 제조 조건을 확립하였다. 시용 후 폐기된 MEA로부터 산침출을 통해 회수되어진 백금 침출 용액으로부터 백금 모사 용액과 동일한 조건에서 5 nm 이하의 백금 나노 입자를 합성하였다. 백금 모사 용액과 백금 침출 용액으로부터 합성된 백금 나노 입자를 XPS 분석을 통해 백금 이온에서 zero-valent의 백금 나노 입자로 환원되었음을 확인하였다.

• Journal of the Korean Physical Society
• /
• 제73권10호
• /
• pp.1444-1451
• /
• 2018

The surface-to-volume ratio of one-dimensional (1D) semiconductor metal-oxide sensors is an important factor for achieving good gas sensing properties because it offers a wide response area. To exploit this effect, in this study, we determined the optimal calcination temperature to maximize the specific surface area and thereby the sensitivity of the sensor. The $In_2O_3$ nanorods were synthesized by using vapor-liquid-solid growth of $In_2O_3$ powders and were decorated with the Pt nanoparticles by using a sol-gel method. Subsequently, the Pt nanoparticle-decorated $In_2O_3$ nanorods were calcined at different temperatures to determine the optimal calcination temperature. The $NO_2$ gas sensing properties of five different samples (pristine uncalcined $In_2O_3$ nanorods, Pt-decorated uncalcined $In_2O_3$ nanorods, and Pt-decorated $In_2O_3$ nanorods calcined at 400, 600, and $800^{\circ}C$) were determined and compared. The Pt-decorated $In_2O_3$ nanorods calcined at $600^{\circ}C$ showed the highest surface-to-volume ratio and the strongest response to $NO_2$ gas. Moreover, these nanorods showed the shortest response/recovery times toward $NO_2$. These enhanced sensing properties are attributed to a combination of increased surface-to-volume ratio (achieved through the optimal calcination) and increased electrical/chemical sensitization (provided by the noble-metal decoration).

• 청정기술
• /
• 제30권2호
• /
• pp.145-156
• /
• 2024

탄소는 비표면적이 매우 크고 우수한 화학적 안정성을 지녀 촉매 지지체로 사용한 연구들이 활발히 진행되고 있다. 탄소를 지지체로 사용하는데 있어 전처리 과정은 필수적이다. 전처리를 통해 금속 입자의 성장을 제어해 안정화하고 지지체와 금속 입자 간 결합력을 향상시킬 수 있다. 본 연구에서는 표면 개질을 위해 탄소의 전처리를 실시하였으며 이를 촉매 지지체로 사용해 5 wt% Pd/C 촉매를 합성하였다. 제조된 촉매의 활성은 페놀 수소화 반응을 통해 평가되었다. 탄소 전처리 시 일반적으로 사용되는 질산과 비교하고자 유기산을 사용해 탄소 전처리를 진행하였고 이를 지지체로 사용해 촉매를 제조하였다. 글루콘산으로 처리된 촉매는 94.93%의 전환율과 92.76%의 사이클로헥사논 선택도를 나타내 질산으로 처리된 촉매보다 우수한 활성을 나타냈다. 따라서 유기산을 이용한 탄소의 전처리가 무기산 처리의 단점을 개선하는 것뿐만 아니라 촉매 성능 개선에 도움을 줄 수 있을 것으로 기대된다.

• 통합자연과학논문집
• /
• 제2권1호
• /
• pp.18-23
• /
• 2009

This minireview provides the chosen examples of our recent discoveries in the polymerization of hydrosilanes, dihydrosilole, lactones, and vinyl derivatives using various catalysts. Hydrosilanes and lactones copolymerize to give poly(lactone-co-silane)s with $Cp_2MCl_2$/Red-Al (M = Ti, Zr, Hf) catalyst. Hydrosilanes (including dihydrosilole) reduce noble metal complexes (e.g., $AgNO_3$, $Ag_2SO_4$, $HAuCl_4$, $H_2PtCl_6$) to give nanoparticles along with silicon polymers such as polysilanes, polysilole, polysiloxanes (and silicas) depending on the reaction conditions. Interestingly, phenylsilane dehydrocoupled to polyphenylsilane in the inert nitrogen atmosphere while phenylsilane dehydrocoupled to silica in the ambient air atmosphere. $Cp_2M/CX_4$ (M = Fe, Co, Ni; X = Cl, Br, I) combination initiate the polymerization of vinyl monomers. In the photopolymerization of vinyl monomers using $Cp_2M/CCl_4$ (M = Fe, Co, Ni), the photopolymerization of MMA initiated by $Cp_2M/CCl_4$ (M = Fe, Co, Ni) shows while the polymerization yield decreases in the order $Cp_2Fe$ > $Cp_2Ni$ > $Cp_2Co$, the molecular weight decreases in the order $Cp_2Co$ > $Cp_2Ni$ > $Cp_2Fe$. For the photohomopolymerization and photocopolymerization of MA and AA, the similar trends were observed. The photopolymerizations are not living. Many exciting possibilities remain to be examined and some of them are demonstrated in the body of the minireview.

• 한국식품위생안전성학회지
• /
• 제34권1호
• /
• pp.1-12
• /
• 2019

신선한 농산물 섭취와 관련된 많은 장점들이 전세계적으로 발표되고 있으며, 지속적인 섭취를 장려하고 있다. 일반적으로 과일과 채소는 최소한으로 가공되기 때문에 천연의 성분들이 건강을 증진시키는 역할을 하기도 하지만 그만큼 질병을 일으킬 수 있는 매개체가 존재할 수 있는 가능성이 매우 높다. 세계 보건기구 (WHO)의 보고서에 따르면 10명 중 1명이 식품에 의해 발생하는 질병으로 고통 받고 있으며, 전 세계적으로 매년 42만 명이 식중독으로 사망하는 것으로 밝혀졌다. 이러한 신선 식품은 농장에서 수확할 때부터 소비자의 식탁에 오르기까지 다양한 경로에서 쉽게 오염 될 수 있다. 본 리뷰논문에서는 신선식품에 의해 발생할 수 있는 질병을 이해하기 위해 화학적, 생물학적, 그리고 물리학적 위험요소로부터 식중독을 일으키는 원인과, 증상, 그리고 검출 방법에 대해서 기술 하였다. 화학적 위험요소의 대표적인 예로는 농약(살충제, 살균제, 및 제초제), 천연 독소 (곰팡이 독소 및 식물 독소), 그리고 중금속 (수은 및 카드뮴) 등이 있으며 이는 크로마토그래피 및 나노 기술 등을 이용하여 검출 할 수 있다. 하지만, 여러 실험에도 불구하고 화학적 위험 요소는 그 구조가 다양하기 때문에 위험 요소를 검출하는 하나의 표준 방법을 수립하기 힘들다. 신선한 과일과 채소는 영양분과 수분이 풍부하기 때문에 박테리아성 병원균 (Salmonella, E. coli O157: H7, Shigella, Listeria monocytogenes, Bacillus cereus), 바이러스 또는 기생충에 의해 쉽게 오염이 되며, 이를 검출하기 위해 주로 다양한 분자 생물학적 기술이 사용되고 있다. 마지막으로 물리적 위험요소인 유리, 금속, 자갈 등과 같은 매개체는 가공 공정 중에 식품에 유입되어 소비자에게 신체적 상해를 줄 수 있다. 이러한 위험요소를 줄이기 위해서 X-선 검사와 같은 투시 시스템을 이용하여 위해물질을 탐지하거나, 생산에 관여하는 직원 교육을 통해 2차 감염을 줄일수 가 있다.