DOI QR코드

DOI QR Code

Platinum Nanoparticles Synthesis using Recovered Platinum from Waste Fuel cell

폐연료전지(廢燃料電池)스택으로부터 회수(回收)된 백금(白金)의 나노 입자(粒子) 제조(製造)

  • 김영애 ((주)알티아이엔지니어링 기술연구소) ;
  • 권현지 ((주)알티아이엔지니어링 기술연구소) ;
  • 구정분 ((주)알티아이엔지니어링 기술연구소) ;
  • 곽인섭 ((주)알티아이엔지니어링 기술연구소) ;
  • 신장식 ((주)알티아이엔지니어링 기술연구소)
  • Received : 2011.02.16
  • Accepted : 2011.03.18
  • Published : 2011.04.29

Abstract

In this study, for recovery of renewable noble metal from used stack of fuel cell, synthesis of platinum nano particle is established through effect of platinum solution concentration, pH value, reducing agent and dispersing agent at a volume ratio of 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm and 10min. Less than 5 nm platinum particles were synthesized using Pt leaching solution from used MEA of stack under same condition of method using simulated Pt solution. The characteristics of synthesized nano particles was illustrated by XPS analysis as the reduction of platinum ions into platinum metals(zero-valent).

연료전지 폐스택으로부터 백금을 회수하여 재사용하기 위하여 백금의 농도, pH, 환원제, 분산제의 영향을 살펴본 결과 1 mM $H_2PtCl_6$:10 mM $NaBH_4$:8 mM Cl4TABr = 1:0.4:0.4(vol.%), pH4, $50^{\circ}C$, 160 rpm, 10분 조건에서 최적 백금 나노 입자 제조 조건을 확립하였다. 시용 후 폐기된 MEA로부터 산침출을 통해 회수되어진 백금 침출 용액으로부터 백금 모사 용액과 동일한 조건에서 5 nm 이하의 백금 나노 입자를 합성하였다. 백금 모사 용액과 백금 침출 용액으로부터 합성된 백금 나노 입자를 XPS 분석을 통해 백금 이온에서 zero-valent의 백금 나노 입자로 환원되었음을 확인하였다.

Keywords

References

  1. 신재생에너지 RD&D사업 수소연료전지 사업단, 2007: 신재생에너지 RD&D 전략 2030, 제1권, pp. 90-91.
  2. Vijay R., 2006 : Fuel Cells, The Electrochemical Society Interface, spring2006, pp. 41-44.
  3. 손영목, 2010: PEMFC의 저 백금촉매 전극의 제조, Energy, 35권, pp. 3941-3957. https://doi.org/10.1016/j.energy.2010.06.006
  4. 예영진, 이진우, 2009: 백금 나노 입자의 형상 제어의 연구 동향, NICE, Vol. 27, No. 5, pp. 494-499.
  5. Edward F. H., Wenchao S., Yang S. H. and Dane M., 2009: Pt nanoparticle stability in PEM fuel cells, Energy Environ. Sci., 2, pp865-871. https://doi.org/10.1039/b821622n
  6. http://www.kemi.kth.se/medusa/.2004
  7. Lee H., Susan E. H., Sasha K., Derek B., Gabor A. S. and Peidong Y., 2006: Morphological control of catalytically active platinum nanocrystals, Angew. Chem. Int. Ed., 45, pp. 7824-7828. https://doi.org/10.1002/anie.200603068
  8. Tsung, C. K., Kuhn J. N., Huang W., Aliaga C., Hung L. I., Somorjai G. A. and Yang P., 2009: Sub-10nm Platinum Nanocrystals with Size and Shape Control; Catalytic Study for Ethylene and Pyrrole Hydrogenation, J. AM. CHEM. SOC., 131, pp. 5816-5822. https://doi.org/10.1021/ja809936n
  9. Renhong L., Wenxing C., Hisayoshi K. and Chunxia M., 2010: Platinum nanoparticles loaded bismuth oxide, Green Chem., 12, pp. 212-215. https://doi.org/10.1039/b917233e
  10. Hfner S. and Wertheim G.K., 1975 : Core-line asymmetries in the x-ray-photoemission spectra of metals, Pyhs. Rev. B 11, pp. 678-683. https://doi.org/10.1103/PhysRevB.11.678
  11. Arico A.S., Shukla A.K., Kim H., Park S., Min M. and Antonucci V., 2001: An xps study on oxidation states of pt and its alloys with Co and Cr and its relevance to electroreduction of oxygen, Applied Surface Science 172, pp. 33-40. https://doi.org/10.1016/S0169-4332(00)00831-X