• 제목/요약/키워드: NiCl₂

검색결과 408건 처리시간 0.03초

압력용기용 SA508 class3강에 대한 underclad 균열의 감수성 평가 - 입열량의 최적화 (Evaluation of Underclad Crack Susceptibility of the SA508 Class 3 Steel for Pressure Vessels -Optimization of Heat Input-)

  • 김석원;양성호;김준구;이영호
    • Journal of Welding and Joining
    • /
    • 제13권2호
    • /
    • pp.139-149
    • /
    • 1995
  • Many pressure vessels for the power plants are fabricated from low alloy ferritic steels. The inner sides of the pressure vessels are commonly weld_cladded with austenitic stainless steels to minimize problems of corrosive attack. The submerged-arc welding(SAW) process is now used in preference to other processes because of the possibilities open to automation to reduce the overaII welding times. The most reliable way to avoid underclad cracks(UCC) which are often detected at the overlap of the clad beads is to use nonsusceptible steels such as SA508 class 3. At present domestically developed forging steel of SA508 cl.S is now being cladded with single layer by using 90mm wide strip, which transfers higher heat input into the base metal compared to the conventional two layers strip cladding which has been in wide use with 30-60 mm wide strip. But the current indices for the influence of heat input on crack susceptibility are not accurate enough to express the subtle difference in crack susceptibility of the steel. Therefore, the purpose of this present study is: l) To determine UCC susceptibility on domestic forging steel, SA508 cl.S cladded with single layer by using submerged arc 90mm strip and, 2) To optimize heat input range by which the crack susceptibility could be eliminated.

  • PDF

(Ba1-xCax)(Ti1-yZry)O3 Powder Synthesis Via Hydrothermal Treatment

  • Park, Byung-Hyun;Choi, Kyoon;Choi, Eui-Seok;Kim, Jong-Hee
    • 한국세라믹학회지
    • /
    • 제39권11호
    • /
    • pp.1017-1022
    • /
    • 2002
  • $(Ba_{1-x}Ca_x)(Ti_{1-y}Zr_y)O_3(BCTZ)$ powders for the Ni-electrode Multilayer Ceramic Capacitor(MLCC) were synthesized via hydrothermal treatment using mixed aqueous solutions of $BaCl_2{\cdot}2H_2O,\Ca(NO_3)2{\cdot}4H_2O,\ ZrOCl_2{\cdot}8H_2O$ and $TiCl_4$. Two component and three component systems were also extensively studied for basic data. BT, CT and BZ powders were crystalline but CZ was determined to be amorphous under the same synthetic condition. In BTZ system, Zr and Ti were completely soluble and Ca would be substituted for Ba up to ∼6 mol% in BCT. The submicron-sized $(Ba_{0.95}Ca_{0.05})(Ti_{0.80}Zr_{0.20})O_3$ powder of the target composition was successfully synthesized at $150{\circ}$ for 12h.

Halide (Cl-, Br-, I-) Influence on the Electronic Properties of Macrocyclic Nickel(II) Complexes: Ab-initio DFT Study

  • Zarei, Seyed Amir;Akhtari, Keivan;Hassanzadeh, Keyumars;Piltan, Mohammad;Saaidpour, Saadi;Abedi, Marjan
    • 대한화학회지
    • /
    • 제57권3호
    • /
    • pp.311-315
    • /
    • 2013
  • The geometry structures of hexa-coordinated [NiLX]X complexes ($X=Cl^-,\;Br^-,\;I^-$) {L = 8,9,18,19-tetrahydro-7H,17H-dibenzo[f,o] [1,5,9,13]dioxadiaza cyclohexadecine-8,18-diol} are optimized by density functional theory (DFT) using B3LYP/LANL2DZ. The calculated geometric parameters are in good agreement with the corresponding experimental values. Calculation results about these complexes show that dipole moment decreases, and the energy levels of HOMOs descend from iodo-complex to chloro-complex. The energy levels of HOMOs descend gently from iodo-complex to chloro-complex, while the energy levels of LUMOs in the present complexes are almost similar; therefore the energy gapes between HOMOs and LUMOs increased from iodo-complex to chloro-complex.

Preparation and capacitance properties of graphene based composite electrodes containing various inorganic metal oxides

  • Kim, Jeonghyun;Byun, Sang Chul;Chung, Sungwook;Kim, Seok
    • Carbon letters
    • /
    • 제25권
    • /
    • pp.14-24
    • /
    • 2018
  • Electrochemical properties and performance of composites performed by incorporating metal oxide or metal hydroxide on carbon materials based on graphene and carbon nanotube (CNT) were analyzed. From the surface analysis by field emission scanning electron microscopy and field emission transmission electron microscopy, it was confirmed that graphene, CNT and metal materials are well dispersed in the ternary composites. In addition, structural and elemental analyses of the composite were conducted. The electrochemical characteristics of the ternary composites were analyzed by cyclic voltammetry, galvanostatic charge-discharge tests, and electrochemical impedance spectroscopy in 6 M KOH, or $1M\;Na_2SO_4$ electrolyte solution. The highest specific capacitance was $1622F\;g^{-1}$ obtained for NiCo-containing graphene with NiCo ratio of 2 to 1 (GNiCo 2:1) and the GNS/single-walled carbon $nanotubes/Ni(OH)_2$ (20 wt%) composite had the maximum specific capacitance of $1149F\;g^{-1}$. The specific capacitance and rate-capability of the $CNT/MnO_2/reduced$ graphene oxide (RGO) composites were improved as compared to the $MnO_2/RGO$ composites without CNTs. The $MnO_2/RGO$ composite containing 20 wt% CNT with reference to RGO exhibited the best specific capacitance of $208.9F\;g^{-1}$ at a current density of $0.5A\;g^{-1}$ and 77.2% capacitance retention at a current density of $10A\;g^{-1}$.

Electrochemical Synthesis of Dumbbell-like Au-Ni-Au Nanorods and Their Surface Plasmon Resonance

  • Park, Yeon Ju;Liu, Lichun;Yoo, Sang-Hoon;Park, Sungho
    • Journal of Electrochemical Science and Technology
    • /
    • 제3권2호
    • /
    • pp.57-62
    • /
    • 2012
  • In this report, we demonstrate that the longitudinal localized surface plasmon resonance mode can be suppressed when the nanorods were in dumbbell shape. The seed nanorods were synthesized by electrochemical deposition of metals into the pores of anodic aluminum oxide templates. The dumbbell-like nanorods were grown from seed Au-Ni-Au nanorods by a rate-controlled seed-mediated growth strategy. The selective deposition of Au atoms onto Au blocks of Au-Ni-Au nanorods produced larger diameter of Au nanorods with bumpy surface resulting in dumbbell-like nanorods. The morphology of nanorods depended on the reduction rate of $AuCl_4^-$, slow rate producing smooth surface of Au nanorods, but high reduction rate producing bumpy surface morphology. Through systematic investigation into the UV-Vis-NIR spectroscopy, we found that the multiple localized surface plasmon resonance (LSPR) modes were available from single-component Au nanorods. And, their LSPR modes of Au NRs with bumpy surface, compared to the smooth seed Au NRs, were red-shifted, which was obviously attributed to the increased electron oscillation pathways. While the longitudinal LSPR modes of smoothly grown Au NRs were blue-shifted except for a dipole transverse LSPR mode, which can be interpreted by decreased aspect ratio. In addition, dumbbell-like nanorods showed an almost disappeared longitudinal LSPR mode. It reflects that the plasmonic properties can be engineered using complex nanorods structure.

산업폐기물 소각시설에서 폐기물 유형에 따른 입자상물질의 배출특성 (Emission Characterization of Particulate Matters According to the Types of Wastes from Industrial Waste Incinerator)

  • 박정호;서정민;조정구;류재용;한성종
    • 한국환경과학회지
    • /
    • 제16권11호
    • /
    • pp.1225-1230
    • /
    • 2007
  • The emissions characteristics of particulate matters(PM) according to the types of wastes from industrial waste incinerator of 800 kg/hr treatment capacity were investigated. For this study, the incinerate waste are as follows; waste resin, waste wood, waste urethane, waste gunny, and waste paper. The particulate samples were collected to be emitted in stack and air pollution control(both cyclone and bag filter). In stack, the concentrations of PM were in the range of 2.61 to $26.51 mg/Sm^3$ and the major chemical species were C, Si, Cl, K, Na, Ca in all the wastes. In cyclone fly ash, the mean content of heavy metal were in the order of Fe > Zn > Pb > Cu > Mn > Cr > Ni > Cd > As > Hg and the heavy metal content of waste resin were Zn 34,197.5 mg/kg, Fe 27,587.6 mg/kg, Pb 6,055.8 mg/kg, respectively. In bag filter fly ash, the mean content of heavy metal were in the order of Zn > Pb > Fe > Cu > Mn > Cd > Cr > Ni > As > Hg and the heavy metal content of waste wood were Pb 36,405.2 mg/kg, Fe 15,762.9 mg/kg, Cu 9,989.5 mg/kg, Cd 2,230.1 mg/kg, respectively. Comparing the heavy metal content of both cyclone and bag filter, in cyclone, the Cr, Fe, Ni content were higher than in bag filter and the Cd, Cu, Hg content were lower than in bag filter.

Fe-31Cr-27Ni-1.6Mo-1.5W-0.26N계 초내식성 스테인리스강의 생체적합성 및 부식특성에 미치는 Co함량의 영향 (Effect of Cobalt Contents on the Biocompatibility and Corrosion Properties of Fe-31Cr-27Ni-1.6Mo-1.5W-0.26N Alloy)

  • 장순근;유영란;남희수;심규태;김정구;김영식
    • 대한금속재료학회지
    • /
    • 제46권4호
    • /
    • pp.209-216
    • /
    • 2008
  • Super austenitic stainless steels shows the high PRE (Pitting Resistance Equivalent) number and the good corrosion resistance. This work controlled the Co contents in Fe-31Cr-1.7Mo-27Ni-0.25N alloys to elucidate the effect of cobalt contents on the biocompatibility and corrosion resistance. Increasing Co contents, the hardness of the annealed alloys tends to be reduced. In aged alloys, cobalt decreased the increments of hardness by aging treatment. Cobalt decreased the critical pitting temperature (CPT) in 6% $FeCl_3$ + 1% HCl solution, but improved the anodic polarization behavior in Hanks' balanced salt solution and artificial saliva solution. Repassivation rate in artificial body solutions was improved by increasing cobalt contents, but didn't show the linear relationship to PRE number of the alloys. The experimental alloys showed the non-cytotoxicity because of its high corrosion resistance.

아연백법 및 공침공정을 이용한 복합 중금속-시안착염 폐수의 현장처리(II) (The Treatment of Heavy Metal-cyanide Complexes Wastewater by Zn$^{+2}$/Fe$^{+2}$ Ion and Coprecipitation in Practical Plant (II))

  • 이종철;이영만;강익중
    • 대한환경공학회지
    • /
    • 제30권5호
    • /
    • pp.524-533
    • /
    • 2008
  • 도금산업에서 배출되는 폐수는 독성이 강한 시안이온과 시안착화합물, 그리고 다양한 중금속이 함유되어 있다. 이러한 독성이 강한 시안이온 및 시안 착화합물의 처리는 알칼리염소법에 의한 시안 산화처리방법이 가장 일반적으로 잘 알려진 방법이다. 이는 시안이온은 분해 가능하나 시안 착화합물의 처리는 어려운 것으로 알려져 있고, 실제로 산업현장에서 수질환경보전법상 수질배출허용기준(나 지역) 1 mg/L을 초과하는 경우가 빈번하다. 본 연구에서는 앞서 밝힌 아연백법 및 공침공정을 이용한 복합 중금속-시안착염 폐수의 현장처리(I) (아래에서 "현장처리(I)"으로 표시 함)과 비교하여 크롬환원처리 후 Fe/Zn 공침공정을 적용하여 시안착염을 제거하고, 알칼리염소법에 의한 잔류시안 산화처리방법으로 검토하였다. 크롬처리는 6가 크롬을 3가 크롬으로 환원시 환원제로서 NaHSO$_3$를 사용하여 pH 2.0, ORP 250 mV, 반응시간 30 min.에서 99.9% 이상의 최대제거율을 얻을 수 있었다. Fe/Zn 공침에 의한 시안착염 제거실험은 pH 9.5, FeSO$_4$/ZnCl$_2$ 3.0 $\times$ 10$^{-4}$ mol, mixing rpm 240에서 시안이온의 제거효율은 98.24%(잔류시안농도: 4.50 mg/L)로 최대의 결과를 얻었다. 황화물 침전법에 의한 기타중금속(Cu, Ni)처리반응의 조건은 pH 9.0$\sim$10.0, 반응시간 30 min. mixing rpm 240에서 Cu의 경우 Na$_2$S 주입량 3.0 mol에서 99.9%, Ni의 경우 Na$_2$S 4.0 mol에서 93.86%의 최대결과를 얻었다. Fe/Zn공침처리 후 잔류시안농도 4.50 mg/L의 제거를 위하여 알칼리염소법을 실시한 결과 1차 산화반응은 pH 10.0 이상, ORP 350 mV, reaction time 30 min, 2차 산화반응은 pH 8.0 이하, ORP 650 mV, 반응시간 30 min.에서 제거효율 95.33%, 잔류시안농도 0.21 mg/L의 결과를 얻었다. 즉 (1) 크롬환원처리, (2) Fe/Zn 공침공정에 의한 시안착화합물 제거 및 기타 중금속(Cu, Ni) 처리, (3) 알칼리염소법에 의한 잔류시안 산화처리를 실시한 결과(아래에서 "현장처리(II)"로 표시 함) 시안의 잔류농도는 0.21 mg/L로서 수질 및 수생태계보전에 관한 법율의 수질배출허용기준(나 지역) 1 mg/L의 규제치 이하로 처리가 가능하다는 것을 현장 확인할 수 있었고 "현장처리(I)"보다 처리효율적인 측면이나 경제적인 측면에서 모두 양호한 결과를 얻을 수 있었다.

보은제일폐탄광 주변 하천수의 지구화학적 특징 (Geochemistry of Stream Water around the Abandoned Boeun Coal Mine, Hoenam Area)

  • 전서령;신익종;이규승
    • 한국환경농학회지
    • /
    • 제20권1호
    • /
    • pp.20-27
    • /
    • 2001
  • 보은광산지역 하천수의 pH는 $6.8{\sim}8.2$로 약산성에서 약 알카리성에 걸친 수질변화를 보여주며, 건기보다는 우기의 하천수가 산성우의 영향으로 인해 다소 pH가 낮게 나타났다. 방치된 폐석 등의 영향으로 Mg, Ca, $HCO_3$, $SO_4$, Al, Fe, Zn, Ni, Co, Cr, Cd, Sr, U 이 하천수내에 부화되어 나타나며, Na, K, As, Cu, $NO_3$, Cl 등은 낮은 농도함량을 보여 이들 원소에 대해 폐광석으로부터의 영향이 거의 없는 것으로 보인다. 주요 양이온 농도는 Mg>Ca>Na>K의 순서로 함량변화를 보이며, 음이온의 함량변화는 $SO_4>HCO_3>Cl>NO_3$의 순서로 나타나 본 하천수는 $Mg-SO_4$ 타입을 보인다. 하천수의 우기와 건기의 이온의 농도변화는 ${\pm}30$ % 이내에서 나타나며, Na, K, $HCO_3$, U, Sr, Cr은 우기 중에 낮은 농도를 보여 우수에 의해 희석되어졌을 가능성이 크다. 우기중에 높은 농도를 보이는 Ca, Mg, $NO_3$, Cd, Co는 약산성의 우수에 의해 기반암이나 폐석으로부터 쉽게 용출되는 원소들이라 판단되었다. TDS, EC 및 Ca, Na, Mg, $HCO_3$, $SO_4$, Fe, Ni, Sr, U등의 원소는 광산으로부터 멀어질수록 하류를 향해 농도가 감소하는 경향을 보여, 이들 원소에 대해서 광폐석이 특히 주요한 오염원으로 작용하고 있으며, 이들 원소의 농도를 컨트롤하는 인자는 희석작용이나 흡착작용 등이 복합적으로 관여하고 있을 것으로 생각된다. 본 광산지역의 하천수내에 일어나는 화학적 현상은 크게 두 가지로 얘기할 수 있다. 철을 함유한 황화광물(황철석 등)의 산화로 인한 Fe과 $SO_4$의 하천수내에 부화현상과 풍화된 기반암에서 탄산의 용출이나 이온교환작용에 의한 중화작용으로 하천은 산성을 띠기보다 오히려 약 알카리성을 띠는 특징을 보인다. 기반암의 영향으로 하천의 지나친 산성화는 일어나지 않을 것으로 보이나 하천내의 이온함량은 비오염수에 비해 극히 높은 값을 보여 방치된 폐석이 잠재적인 위험성을 내포하고 있음을 시사한다. 또한 알카리상태에서 부화된 철은 철수산화물의 형태로 침전되어 하천의 적화현상을 일으키는 주원인 물질로 작용한다. 이들 철산화물은 침전되면서 동시에 하천내의 용존 중금속을 흡착이나 공침에 의해 동시에 침전시키는 역할을 하는 것으로 방치될 경우 2차적 오염원으로 작용할 우려가 있어, 이들 철산화물에 대한 보다 상세한 연구가 필요하다고 사려된다.

  • PDF

논 관개수중 영양물질의 함량변화와 천연공급량 (Changes of Nutrients Content and Natural Supplies by Irrigation Water during the Rice Cultivation)

  • 한강완;전재철;조재영;김성조
    • 한국환경농학회지
    • /
    • 제16권4호
    • /
    • pp.394-398
    • /
    • 1997
  • 전라북도 진안군 마령면 평지리 일대 1.0ha의 논을 대상으로 벼농사 재배기간중 공급되는 관개수중에 함유된 영양물질과 오염물질의 함량 및 총 관개유량 측정을 통하여 논에 부하되는 영양물질과 중금속의 유입량을 시기별로 조사한 결과는 다음과 같다. 관개용수의 pH는 6.45${\sim}$8.34의 범위였으며, 전기전도도는 관개초기에만 $110{\mu}S/cm$ 수준을 유지하였으며 그밖에는 $90{\mu}S/cm$ 수준을 유지하였다. 전질소, 암모니아태질소 및 질산태질소의 함량은 각각 3.09${\sim}$12.46, 0.17${\sim}$1.34, 2.70~10.72mg/L 수준이었으며, 전인산의 함량은 0.09~0.22mg/L, orthophosphate는 검출되지 않았다. $Ca^{++}$는 0.89~5.12, $Mg^{++}$는 1.12~2.76, $Na^{+}$는 1.74~4.52, $Ka^+$는 1.34~4.18mg/L의 범위였으며 시기별로 큰 차이를 나타내지 않았다. 또한 $Cl^-$$SO_4\;^{2-}$는 각각 1.3~24.9, 3.5~20.3mg/L의 범위로 이앙초기에 높았다가 점차적으로 낮아지는 경향이었다. 중금속오염물질중 Cu와 Zn만이 각각 0.001~0.009, 0.007~0.091mg/L로 나타났을 뿐 Pb, Cd, Cr, Ni는 검출되지 않았다. 벼재배기간동안 1.0ha의 논에 $4,250m^3$의 관개수를 공급하였을 때 영양물질의 천연공급량은 전질소 29.68kg/1.0ha, 암모니아태질소 1.80kg/1.0ha, 질산태질소 24.57kg/1.0ha, 전인산 0.51kg/1.0ha으로 나타났다. 대표적인 양이온으로 $Ca^{++},\;Mg^{++},\;Na^+,\;K^+$는 각각 9.42, 7.09, 13.34, 9.08kg/1.0ha의 수준으로 공급되었으며 $Na^{+}>\;Ca^{++}>\;K^{+}>\;Mg^{++}$의 순서였다. 음이온으로 $Cl^-$$SO_4\;^{2-}$는 각각 40.27, 41.38kg/1.0ha으로 나타났다. 조사대상 6가지 중금속중 Cu와 Zn만이 관개수를 통하여 각각 0.17kg/1.0ha, 0.133kg/1.0ha 정도 논토양에 부하되었을 뿐 Pb, Cd, Cr, Ni은 검출되지 않았다.

  • PDF