• 한국해안해양공학회지
• /
• 제7권3호
• /
• pp.227-232
• /
• 1995

크노이드파의 발생에 필요한 Jacobian 매개변수 산정에 관한 새로운 방법이 제안되었다. 제안된 방법에서는 수심, 파고 및 파의 주기 또는 파장이 주어지면, Newton-Raphson 방법과 산술 및 기하평균방법을 이용하여 기존의 시행착오법과 비교하여 과정은 더욱 단순하면서도 동일한 정밀도를 갖는 결과를 제공한다.

• Communications for Statistical Applications and Methods
• /
• 제10권1호
• /
• pp.225-232
• /
• 2003

The support vector machine (SVM) is becoming increasingly popular in classification. The import vector machine (IVM) has been introduced for its advantages over SMV. This paper tries to improve the IVM. The proposed method, which is referred to as the polychotomous machine (PM), uses the Newton-Raphson method to find estimates of coefficients, and the Rao and Wald tests, respectively, for addition and deletion of import points. Because the PM basically follows the same addition step and adopts the deletion step, it uses, typically, less import vectors than the IVM without loosing accuracy. Simulated and real data sets are used to illustrate the performance of the proposed method.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.77-85
• /
• 2013

In the location science, environmental effect becomes a new main consideration for site selection. For the unwanted facility location selection, decision makers should consider the cost of resolving the environmental conflict. We introduced the negative influence cost for the facility which was inversely proportional to distance between the facility and residents. An unwanted facility location problem was suggested to minimize the sum of the negative influence cost and the transportation cost. The objective cost function was analyzed as nonlinear type and was neither convex nor concave. Three GRASP (Greedy Randomized adaptive Search Procedure) methods as like Random_GRASP, Epsilon_GRASP and GRID_GRASP were developed to solve the unwanted facility location problem. The Newton's method for nonlinear optimization problem was used for local search in GRASP. Experimental results showed that quality of solution of the GRID_GRASP was better than those of Random_GRASP and Epsilon_GRASP. The calculation time of Random_GRASP and Epsilon_GRASP were faster than that of Grid_GRASP.

• 대한전기학회논문지:전력기술부문A
• /
• 제48권11호
• /
• pp.1394-1400
• /
• 1999

This paper presents and efficient improvement of the iterative eigenvalue calculation method and the selection of initial values in AESOPS algorithm. To determine the initial eigenvalues of the system, system state matrix is constructed with the two-axis generator model. From the submatrices including synchronous and damping coefficients, the initial eigenvalues are calculated by the QR method. Participation factors are also calculated from the above submatrices in order to determine the generators which have a important effect to the specific oscillation mode. Also, the heuristically approximated eigenvalue calculation method in the AESOPS algorithm is transformed to the Newton Raphson Method which is largely used in the nonlinear numerical analysis. The new methods are developed from the AESOPS algorithm and thus only a few calculation steps are added to practice the proposed algorithm.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 춘계 학술발표회논문집
• /
• pp.481-490
• /
• 2003

This paper presents an efficient eigensolution method for non-proportionally damped systems. The proposed method is obtained by applying the accelerated Newton-Raphson technique and the orthonormal condition of the eigenvectors to the linearized form of the quadratic eigenproblem. A step length and a selective scheme are introduced to increase the convergence of the solution. The step length can be evaluated by minimizing the norm of the residual vector using the least square method. While the singularity may occur during factorizing process in other iteration methods such as the inverse iteration method and the subspace iteration method if the shift value is close to an exact eigenvalue, the proposed method guarantees the nonsingularity by introducing the orthonormal condition of the eigenvectors, which can be proved analytically. A numerical example is presented to demonstrate the effectiveness of the proposed method.

• 한국해양공학회지
• /
• 제37권6호
• /
• pp.256-265
• /
• 2023

Many numerical methods have been developed since 1961, but unresolved issues remain. This study developed a numerical method to address these issues and determine the coefficients and properties of rotational waves with a shear current in a finite water depth. The number of unknown constants was reduced significantly by introducing a wavelength-independent coordinate system. The reference depth was calculated independently using the shooting method. Therefore, there was no need for partial derivatives with respect to the wavelength and the reference depth, which simplified the numerical formulation. This method had less than half of the unknown constants of the other method because Newton's method only determines the coefficients. The breaking limit was calculated for verification, and the result agreed with the Miche formula. The water particle velocities were calculated, and the results were consistent with the experimental data. Dispersion relations were calculated, and the results are consistent with other numerical findings. The convergence of this method was examined. Although the required series order was reduced significantly, the total error was smaller, with a faster convergence speed.

• Journal of Electrical Engineering and Technology
• /
• 제2권3호
• /
• pp.312-319
• /
• 2007

The solution of the power flow is one of the most important problems in electrical power systems. These traditional methods such as Gauss-Seidel method and Newton-Raphson (NR) method have had drawbacks up to now such as initial values, abnormal operating solutions and divergences in heavy loads. In order to overcome theses problems, the power flow solution incorporating genetic algorithm (GA) is introduced in this paper. General operator of genetic algorithm, arithmetic crossover, and non-uniform mutation operator of GA are suggested to solve the power flow problem. While abnormal solution cannot be obtained by a NR method, multiple power flow solution can be obtained by a GA method. With a heavy load, both normal solution and abnormal solution can be obtained by a proposed method. In this paper, a floating number representation instead of the binary number representation is introduced for accuracy. Simulation results have been compared with traditional methods.

• Communications for Statistical Applications and Methods
• /
• 제17권1호
• /
• pp.67-77
• /
• 2010

단계별로 얻어진 $I{\times}J$ 이차원 범주형 자료에서 분할표 일부의 칸에서 도수가 붕괴(collapse)된 상태로 조사가 이루어진 것을 단계별추출(step-wise sampling)이라 한다. 단계별추출로 얻어진 자료를 분석할 경우 단계별추출법을 사용하여 분석하면 분석의 효과를 얻을 수 있다. 본 논문에서는 단계별추출법 중에서 최대우도추정법을 이용하여 얻어진 정확최대우도추정량(exact maximum likelihood estimator)과 단계별추출최대우도추정량을 연구하였다. 또한 MSE와 편향(bias)을 기준으로 모의실험을 통하여 두 추정법을 비교하였다.

• 제어로봇시스템학회논문지
• /
• 제13권6호
• /
• pp.603-608
• /
• 2007

In the conventional AOA(angle-of-arrival) positioning utilizing reverse-link wireless channel, each sensor should be equipped with an array antenna to measure the incident angle of signal transmitting from a tag. To perform the complicated signal processing for angle measurements, sensor size and its power consumption will be large. In some applications like mobile robot location, there exists no strict restriction in tag size or in power consumption. Rather, it is desirable that the sensor would be as small as possible. This paper presents a new AOA positioning method utilizing forward-link channel. Under the assumption that the mobile robot is operating on the flat surface, the measurement model for FLAOA(tiJrward-link AOA) is derived first. Two kinds of position estimation algorithms using FLAOA measurements are proposed; Gauss-Newton method and closed-fonn solution method. With the proposed methods, we can ohtain the attitude of robot as well as its position. Positioning performance of proposed methods is compared by computer simulation. Simulation results show that the closed-form solution method using FLAOA measurements is suitable for indoor robot positioning.

• East Asian mathematical journal
• /
• 제35권5호
• /
• pp.597-612
• /
• 2019

In this study, we propose a new logarithmic barrier approach to solve linear programming problem using the projective method of Karmarkar. We are interested in computation of the direction by Newton's method and of the step-size using minorant functions instead of line search methods in order to reduce the computation cost. Our new approach is even more beneficial than classical line search methods. We reinforce our purpose by many interesting numerical simulations proved the effectiveness of the algorithm developed in this work.