• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2005

We suggest flux quantum-based mechanism for force realization in the sub-pico-Newton range. By controlling the number of flux quantum in a superconducting ring, a force can be created as an integer multiple of a constant force step. For a 50 nm-thick Nb ring with the inner and outer radii of $5{\mu}m\;and\;10{\mu}m$, respectively, the force step is estimated to be 165 fN, assuming the magnetic field gradient of 10 T/m. We also estimated a maximum force limit to be $1\sim2$ pN.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.47-48
• /
• 2006

A roughness measuring system which comprises an integrating sphere and a stabilized laser has been fabricated with the aim of measuring the roughness correction value which is necessary in gauge block measurement by optical interferometry. To calibrate the system, a Newton's ring interferometer has been introduced. The method how to calibrate the roughness measurement system has been described.

• 비파괴검사학회지
• /
• 제13권1호
• /
• pp.21-28
• /
• 1993

If the infinitesimal delamination exists and the two waves can hardly be distinguished from each other on account of being much closer, we cannot measure the thickness of delamination by the time difference method. On this study, we calculated the thickness of infinitesimal delamination model by means of measuring echo height due to the deflection of material particles and utilized Newton Ring for optical measurement as a delamination model. From the result of Newton Ring expressed in the delamination model, we can calculate the infinitesimal delamination thickness up to $0.2{\sim}0.3{\mu}m$ due to the difference of acoustic impedance by the ratio of the echo height to the total reflection.

• 영재교육연구
• /
• 제23권5호
• /
• pp.817-833
• /
• 2013

본 연구에서는 토마스 영(T. Young)이 빛의 간섭 이론을 형성하는 과정에서 보인 창의적 사고과정을 분석하여 과학교육 특히 과학을 통한 창의성 교육에 대한 시사점을 도출하는 데 목적을 두었다. 이를 위해 영(Young)이 직접 집필한 빛의 간섭 이론에 대한 논문을 분석하는 문헌분석의 연구방법을 적용하였다. 연구결과는 다음과 같다. 첫째, 영은 소리와 빛의 유사성을 추론하는 과정에서 비유추론을 사용했으며, 이 과정에서 영의 예리한 관찰력을 볼 수 있다. 둘째, 영은 파장이 같은 두 물결파가 나타내는 파동의 간섭 현상으로부터 귀추하여, 같은 근원의 두 빛이 어떤 거리에서 중첩될 때 밝고 어두운 연속적 무늬를 나타낼 수 있음을 추론하고 빛의 간섭 현상을 설명하는 가설을 설정하게 된다. 그리고 실험 장치를 개발하여 이를 증명하였으며 이것은 빛이 파동임을 증명하는 결정적인 실험이 된다. 이것으로부터 전혀 다를 것 같은 소리와 빛 사이의 유사성을 영이 발견한 것도 창의적이지만 그 유사성을 좀 더 높은 수준의 '파동성'으로 추론한 것뿐만 아니라 동일한 빛이 갈라졌다가 만날 때 밝고 어두운 무늬를 보이는 현상이 두 물결파가 만나 보강과 소멸을 보이는 현상과 동일한 이론으로 설명될 수 있음을 추론하여 빛의 간섭 현상을 설명하는 가설을 추론한 것 또한 성공한 귀추의 하나로 중요한 창의성 발현에 속한다. 끝으로 영은 물결파의 간섭현상을 보이기 위해 실험 장치를 고안하였으며, 파동의 중첩을 쉽게 설명하기 위해 슬라이더 장치를 고안하였다. 또한 빛의 간섭 현상을 보이기 위한 이중 슬릿 실험 장치를 고안하였다. 이상과 같이 영의 빛의 간섭 이론을 형성하는데 활용한 비유추론과 간섭 현상을 보이기 위한 실험 장치는 과학교육에서 창의성 교육에 적절히 활용할 수 있는 교육방법과 실험설계이다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
• /
• pp.31-34
• /
• 2003

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by chemical and mechanical polishing(CMP) process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of sapphire crystalline wafer at surfaces has a full width at half maximum 89 arcses. The surfaces of sapphire wafers were mechanically affected by residual stress and surface default. Sapphire wafers's waveness has higher abrasion rate in the edge of the wafer than its center due to Newton's Ring interference.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1281-1286
• /
• 2003

A line search algorithm to increase a convergence in Newton's method is developed and applied to nonlinear finite element analysis. The algorithm is based on the slack line search theory which is an efficient algorithm to determine initial acceleration coefficient, variable backtracking algorithm proposed by some researchers, and convergence criterion based on residual norm. Also, it is capable of avoiding exceptional diverging conditions. Developed program is tested in metal forming simulation such as forging and ring rolling. Numerical result shows the validity of the algorithm for a highly nonlinear system .

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.85-91
• /
• 2004

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by chemical and mechanical polishing process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of sapphire crystalline wafer at surfaces has a full width at half maximum of 89 arcsec. The surfaces of sapphire wafer were mechanically affected by residual stress during the polishing process. The wave pattern of optical interference of sapphire wafer implies higher abrasion rate in the edge of the wafer than its center from the Newton's ring.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 한국소음진동공학회논문집
• /
• 제16권5호
• /
• pp.441-451
• /
• 2006

It is known that ball bearings mounted in housing or on shaft are playing a key role to keep it running smoothly. The roundness of a housing bore on which bearing outer ring is mounted with interference has directly affected the running accuracy of bearing. The running accuracy of bearing, therefore, can extend the significant influence to the rotating machinery as well. In this paper, bearing's vibration and fatigue life considering raceway roundness of ball bearing before and after mounted in housing bore are theoretically estimated. To perform analysis, a simple three degrees of freedom model was proposed and then Newton-Raphson iterative method was introduced to be utilized in the analysis. The results show that the vibration magnitude of ball bearing fitted into housing unit is appeared considerably larger than the one of its pre-assembling. And theoretical $L_{10}$ life which ninety percent of the bearing population will endure decreased in about fifty percent.