Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Improvement of Convergence Rate by Line Search Algorithm in Nonlinear Finite Element Method

비선형 유한요소법에서 선탐색 알고리즘의 적용에 의한 수렴속도의 개선

  • 구상완 (서강대학교 대학원 기계공학과) ;
  • 김낙수 (서강대학교 기계공학과)
  • Published : 2003.08.01
Download PDF
⟨ Previous Next ⟩

Abstract

A line search algorithm to increase a convergence in Newton's method is developed and applied to nonlinear finite element analysis. The algorithm is based on the slack line search theory which is an efficient algorithm to determine initial acceleration coefficient, variable backtracking algorithm proposed by some researchers, and convergence criterion based on residual norm. Also, it is capable of avoiding exceptional diverging conditions. Developed program is tested in metal forming simulation such as forging and ring rolling. Numerical result shows the validity of the algorithm for a highly nonlinear system .

Keywords

References

  1. Park, K. and Yang, D. Y., 1998, 'Domain Decomposition using substructuring Method and Parallel Computation of the Rigid-Plastic Finite Element analysis,' Transactions of Korean Society for Technology of Plasticity, pp. 474-480
  2. Sloan, S. W. and Randolph, M. F., 1983 'Automatic Element Reordering for Finite Element Analysis with Frontal Solution Schemes,' International Journal for Numerical Methods in Engineering, Vol. 19, pp. 1153-1181 https://doi.org/10.1002/nme.1620190805
  3. Scott, J. A., 1999, 'On Ordering Elements for a Frontal Solver,' Commun. Numer. Meth. Engng, Vol. 15, pp. 309-325 https://doi.org/10.1002/(SICI)1099-0887(199905)15:5<309::AID-CNM246>3.0.CO;2-F
  4. Chung, K. and Wagoner, R. H., 'Numerical Improvement of Viscoplastic, Non-linear Finite Element Analysis,' Int. J. Mech. Sci., Vol. 29, pp. 45-49 https://doi.org/10.1016/0020-7403(87)90073-7
  5. Yang, D. Y., Chung, W. J. and Shim, H. B., 1990, 'Rigid-Plastic Finite Element Analysis of Sheet Metal Forming Process with Initial Guess Generation,' Int. J. Mech. Sci., Vol. 32, No. 8, pp. 687-708 https://doi.org/10.1016/0020-7403(90)90010-G
  6. Bathe, K. J., 1996, Finite Element Procedures, Prentice Hall, pp. 754-761
  7. Arora, J. S., 1989, Introduction to Optimum Design, McGraw-Hill, pp. 288-289
  8. Crisfield, M. A., 1995, Non-linear Finite Element Analysis of Solids and Structures, Vol. 1, John Wiley, pp. 254-265
  9. Bonet, J. and Wood, R. D., Nonlinear Continuum Mechanics for Finite Element Analysis, Cambridge University Press, pp. 186-187
  10. Esche, S. K., Kinzel, G. L. and Altan, T., 1997, 'Issues in convergence improvement for non-linear finite element programs,' International Journal for Numerical methods in Engineering, Vol. 40, pp. 4577-4594 https://doi.org/10.1002/(SICI)1097-0207(19971230)40:24<4577::AID-NME273>3.0.CO;2-D
  11. Jeremic, B., 2001, 'Line Search Techniques for Elasto-Plastic Finite Element Computations in Geomechanics,' Commun. Numer. Mech. Engng, Vol. 17, pp. 115-125 https://doi.org/10.1002/1099-0887(200102)17:2<115::AID-CNM393>3.0.CO;2-6
  12. Dennis, Jr, J. E. and Schnabel, R. B., 1983, Numerical Methods for Unconstrained Optimization and Nonlinear Equations, Prentice-Hall, pp. 126-129
  13. Mori, K. and Yoshimura, H., 1982, 'Three-Dimensional Rigid-Plastic Finite Element Method Using Diagonal Matrix for Large-Scale Simulation of Metal-Forming Process,' International Journal of Mechanical Science, pp. 1821-1834 https://doi.org/10.1016/S0020-7403(99)00071-5
  14. International Journal of Mechanical Science ThreeDimensional Rigid-Plastic finite Element Method Using Diagonal Matrix for Large-Scale; Simulation of Metal-Forming Process Mork,K.;Yoshimura,H.
  15. Transactions of Korean Society for Technology of Plasticity Domain Decomposition using substructuring Method and Parallel Computation of the Rigid-Plastic Finite Elemint analysis Park,K.;Yang,D.Y.