• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.1
• /
• pp.57-64
• /
• 2006

Multiprocessor system on chip (MPSoC) platforms has set a new innovative trend for the SoC design. Quality of service parameters and performance matrix are leading to the adoption of new design methodology for SoC, which will incorporate highly scalable, reusable, predictable, cost and energy efficient platform not only for underlying communication backbone but also for the entire system architecture of NOC. Like the layered architecture for the communication backbone of NOC, we have proposed the entire system architecture for NOC to be a seven layered architecture in itself. Such a platform can separate the domain specific issues which will model concurrency along with the synchronization issues more effectively. For such a layered architecture, model of computation will provide a framework to that can model concurrency and synchronization issues which are natural for any application. Therefore it becomes extremely important to use a right computation model in a specific NOC region.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.68-75
• /
• 2016

As the number of cores and IPs increase in multiprocessor system-on-chip (MPSoC), network-on-chip (NoC) has emerged as a promising novel interconnection architecture for its parallelism and scalability. However, minimization of the latency in NoC with legacy bus IPs must be addressed. In this paper, we focus on the latency minimization problem in NoC which accommodates legacy bus protocol based IPs considering the trade-offs between hop counts and path collisions. To resolve this problem, we propose separated address/data network for independent address and data phases of bus protocol. Compared to Mesh and irregular topologies generated by TopGen, experimental results show that average latency and execution time are reduced by 19.46% and 10.55%, respectively.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1137-1140
• /
• 1999

In this thesis, we research about Communication System Construction and Test-Bed Realization Method and Software’s Design with written program into Embedded Micro Controller’s restricted memory region using a DSP Chip to deal with mainly high speed communication. Tools used for modern communication network control use TI or AMD general chip class, but nevertheless responsibility for the point at issue, Analog Device is architecture design model moderated for small communication system. In this thesis, we present extended model, and realize basic case.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.8
• /
• pp.554-561
• /
• 2006

In recent years, as SoC design research is actively conducted, a large number of IPs are included in a system. Various bus protocols and bus architectures are designed to increase IP reusability. Among them, the AMBA AHB became a de facto standard although it is somewhat inadequate for a large scale SoC. We proposed SNP and SNA, high performance on-chip-bus protocol and architecture, respectively, to solve the problem of the conventional shared buses. However, it seems to be imperative that the new on-chip-bus system support AMBA-compatible IPs for a while since there are a lot of IPs with AMBA interface. In this paper, we propose an extended SNP specification and a corresponding SNA component to support ABMA-compatible IPs used in SNA - based system. We extend the phase of the SNP by 1 bit to add new 8 phases to support communication based on AMBA protocol without penalty of elongated cycle latency. The ARB-to -XSNP converter translates the protocol between AHB and SNP to attach AMBA -compatible IPs to SNA based system. We show that AMBA IPs can communicate through SNP without any degradation of performance using the extended SNP and AHB - to- XSNP converter.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.318-328
• /
• 2011

Stage-level reconfigurable chip multiprocessor (CMP) aims to achieve highly reliable and fault tolerant computing by using interwoven pipeline stages and on-chip interconnect for communicating with each other. The existing crossbar-switch based stage-level reconfigurable CMPs offer high reliability at the cost of significant area/power overheads. These overheads make realizing large CMPs prohibitive due to the area and power consumed by heavy interconnection networks. On other hand, area/power-efficient architectures offer less reliability and inefficient stage-level resource utilization. In this paper, I propose a hierarchical multiplexing interconnection structure in lieu of crossbar interconnect to design area/power-efficient stage-level reconfigurable CMP. The proposed approach is able to keep the reliability offered by the crossbar-switch while reducing the area and power overheads. Experimental results show that the proposed approach reduces area by up to 21% and power by up to 32% when compared with the crossbar-switch based interconnection network.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.8
• /
• pp.74-79
• /
• 2007

In general, the high cost, long time, and complex steps are required in the design and implementation of MPSoC(Multi-Processor System on a Chip), therefore a platform is used to test the functionality and performance of IPs(Intellectual Properties). In this paper, we study a platform architecture to verify IPs based on Interconnect Network among processors, and show that the MPSoC platform gives better performance than a single processor for an application program.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1931_1933
• /
• 2009

NoC 기반 시스템이 적용되는 설계는 시스템 크기가 커짐에 따라 칩 테스트 문제도 동시에 제기 되고 있다. 이에 따라 NoC 기반의 시스템의 테스트 시간을 줄일 수 있는 internal test 방식의 새로운 BIST(Built-in Self-Test) 구조에 관한 연구를 하였다. 기존의 NoC 기반 시스템의 BIST 테스트 구조는 각각의 router와 core에 BIST logic과 random pattern generator로 LFSR(Linear Feedback Shift Register)을 사용하여 연결하는 individual 방식과 하나의 BIST logic과 LFSR을 사용하여 각각의 router와 core에 병렬로 연결하는 distributed 방식을 사용한다. 이때, LFSR에서 생성된 테스트 벡터가 router에 사용되는 FIFO 메모리를 통과하면서 생기는 테스트 타임 증가를 줄이기 위하여 shift register 형태의 FIFO 메모리를 변경하였다 제안된 방법에서 테스트 커버리지 98%이상을 달성하였고, area overhead면에서 효과를 볼 수 있다.

• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.358-367
• /
• 2017

Advanced Driver Assistance Systems(ADAS), such as Front Collision Warning System (FCWS) are currently being developed. FCWS require high processing speed because it must operate in real time while driving. In addition, a low-power system is required to operate in an automobile embedded system. In this paper, FCWS is implemented in CPU-FPGA architecture in embedded system to enable real-time processing. The lane detection enabled the use of the Inverse Transform Perspective (IPM) and sliding window methods to operate at fast speed. To detect the vehicle, a Convolutional Neural Network (CNN) with high recognition rate and accelerated by parallel processing in FPGA is used. The proposed architecture was verified using Intel FPGA Cyclone V SoC(System on Chip) with ARM-Core A9 which operates in low power and on-board FPGA. The performance of FCWS in HD resolution is 44FPS, which is real time, and energy efficiency is about 3.33 times higher than that of high performance PC enviroment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.40-48
• /
• 2015

An optical network-on-chip(ONoC) architecture is emerging as a new paradigm for solving on-chip communication bottleneck. Recent studies on ONoC have been focusing on supporting the parallel transmission and avoiding path collisions using wavelength division multiplexing(WDM). However, since the maximum number of wavelengths, which a single waveguide can accommodate is limited by crosstalk and insertion loss. Therefore previous WDM studies based on incrementing the number of different wavelengths according to the number of nodes would be infeasible due to the implementation complexity. To solve such problems, we combined time division multiplexing(TDM) and wavelength-routed ONoC, along with an optimized channel allocation algorithm, which can minimize the number of extra wavelength channels and latency caused by combining TDM scheme.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2061-2068
• /
• 2016

A Bloom filter is a space-efficient data structure popularly applied in many network algorithms. This paper proposes a vectored Bloom filter to provide a high-speed Internet protocol (IP) address lookup. While each hash index for a Bloom filter indicates one bit, which is used to identify the membership of the input, each index of the proposed vectored Bloom filter indicates a vector which is used to represent the membership and the output port for the input. Hence the proposed Bloom filter can complete the IP address lookup without accessing an off-chip hash table for most cases. Simulation results show that with a reasonable sized Bloom filter that can be stored using an on-chip memory, an IP address lookup can be performed with less than 0.0003 off-chip accesses on average in our proposed architecture.