• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.10
• /
• pp.36-42
• /
• 2010

FFT(Fast Fourier Transform) processor is one of the key components in the implementation of OFDM systems for many wireless standards such as IEEE 802.22. To improve the performances of FFT processors, various studies have been carried out to reduce the complexities of multipliers, memory interface, control schemes and so on. While the number of FFT stages increases logarithmically $log_2N$) as the FFT point-size (N) increases, the number of required registers (or, memories) increases linearly. In large point-size FFT designs, the registers occupy more than 70% of the chip area. In this paper, to reduce the memory size of IFFT for OFDM transmitters, we propose a new IFFT design method based on a combined mapping of modulated data, pilot and null signals. The proposed method focuses on reducing the sizes of the registers in the first two stages of the IFFT architectures since the first two stages require 75% of the total registers. By simulations of 2048-point IFFT design for cognitive radio systems, it is shown that the proposed IFFT design method achieves more than 38.5% area reduction compared with previous IFFT designs.

• Korean Journal of Clinical Pharmacy
• /
• v.29 no.1
• /
• pp.18-24
• /
• 2019

Background: Although a growing number of guidelines and clinical researches are available for immunosuppressive treatment of post-transplantation, there is no clinical practice guideline for the care of kidney transplant recipients in Korea. Selection of a researchable question is the most important step in conducting qualified guideline development. Thus, we aimed to formulate key questions for Korean guideline to aid clinical decision-making for immunosuppressive treatment. Methods: Based on previous published guidelines review, a first survey was constructed with 29 questions in the range of immunosuppressive treatments. The experts were asked to rate the clinical importance of the question using a 5-point Likert scale. The questions reached 60% or more from the first survey and additional new questions were included in the second survey. In analyzing the responses to items rated on the 9-point scale, consensus agreement on each question was defined as 75% or more of experts rating 7 to 9. Results: In the first survey, 50 experts were included. Among the 29 questions, 27 were derived to get 60% or more importance and 3 new questions were additionally identified. Through the second survey, 9 questions were selected that experts reached consensus on 75% and over of the options. Finally, we developed key questions using PICO (patient, intervention, comparison, and outcome) methodology. Conclusion: The experts reached a high level of consensus on many of key questions in the survey. Final key questions provide direction for developing clinical practice guideline in the immunosuppressive treatment of transplantation.

• Structural Engineering and Mechanics
• /
• v.22 no.6
• /
• pp.701-717
• /
• 2006

In the existing reports regarding free transverse vibrations of the Euler-Bernoulli beams, most of them studied a uniform beam carrying various concentrated elements (such as point masses, rotary inertias, linear springs, rotational springs, spring-mass systems, ${\ldots}$, etc.) or a stepped beam with one to three step changes in cross-sections but without any attachments. The purpose of this paper is to utilize the numerical assembly method (NAM) to determine the exact natural frequencies and mode shapes of the multiple-step Euler-Bernoulli beams carrying a number of lumped masses and rotary inertias. First, the coefficient matrices for an intermediate lumped mass (and rotary inertia), left-end support and right-end support of a multiple-step beam are derived. Next, the overall coefficient matrix for the whole vibrating system is obtained using the numerical assembly technique of the conventional finite element method (FEM). Finally, the exact natural frequencies and the associated mode shapes of the vibrating system are determined by equating the determinant of the last overall coefficient matrix to zero and substituting the corresponding values of integration constants into the associated eigenfunctions, respectively. The effects of distribution of lumped masses and rotary inertias on the dynamic characteristics of the multiple-step beam are also studied.

• Journal of Ship and Ocean Technology
• /
• v.8 no.2
• /
• pp.41-60
• /
• 2004

Ship design process requires lots of complicated analyses for determining a large number of design variables. Due to its complexity, the process is divided into several tractable designs or analysis problems. The interdependent relationship requires repetitive works. This paper employs collaborative optimization (CO), one of the multidisciplinary design optimization (MDO) techniques, for treating such complex relationship. CO guarantees disciplinary autonomy while maintaining interdisciplinary compatibility due to its bi-level optimization structure. However, the considerably increased computational time and the slow convergence have been reported as its drawbacks. This paper proposes the use of an approximation model in place of the disciplinary optimization in the system-level optimization. Neural network classification is employed as a classifier to determine whether a design point is feasible or not. Kriging is also combined with the classification to make up for the weakness that the classification cannot estimate the degree of infeasibility. For the purpose of enhancing the accuracy of a predicted optimum and reducing the required number of disciplinary optimizations, an approximation management framework is also employed in the system-level optimization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1869-1878
• /
• 2001

Experiments are carried out to investigate the effect of pulsations on the flow and heat transfer characteristics of an axisymmetric impinging jet on a flat plate heated by using a gold coated aim. Vertex motion in the impinging jet is visualized using a fog generator, and a thermochromatic liquid crystal (TLC) technique is used to measure the time averaged local temperature distributions on the impingement plate. In addition, the quantitative data for mean velocity and turbulence intensity are obtained employing hot-wire anemometer. Parameters such as pulsating frequency (f = 0, 10 and 20 Hz) and the nozzle-to-palate spacing (H/D = 2, 10) are considered at the jet Reynolds number of 20,000. Consequently, the significant changes of flow structure and local Nusselt number distribution due to pulsations are observed. In the case of H/D = 2, the enhanced heat transfer coefficient exceeding 30 % is observed at the stagnation point. At the high H/D, heat transfer rate increases with pulsation frequency.

• Journal of Hydrospace Technology
• /
• v.2 no.1
• /
• pp.1-9
• /
• 1996

We consider the following two questions mainly in this study. First one is how the free surface hayes affect the lift of a shallowly submerged moving body. For this matte., we reinterpret the theoretical results of Kochin(1936), and point out that the high Froude number approximation is not always on the safer side. Second one is what sort of dimensionless parameters determine the occurrence of wave breaking behind a moving submerged body. Temporarily before getting a better answer, we propose that the two-parameter-plane, namely, the plane of the Froude number and the square root of the ratio of the submerged depth and the body length, may be used for predicting the possibility of wave breaking behind the submerged body. A region in the parameter plane is put forth as that of wave breaking, and the validity of this proposal is shown by its agreement with the existing experimental data of Parkin et al(1955) and those of Duncan(1983). Finally, linear and nonlinear numerical results are compared with the existing experimental data to see in what range of the parameters the linear and nonlinear theory case predict the wave field and the pressure on the body with reasonable accuracy. However, since the experimental data, which offer both the pressure and wave elevation for a submerged moving body, are very scarce, much cannot be attained through this comparative study. Hence, it is strongly recommended to carry out well planned experiments to get such data.

• International Journal of Human Ecology
• /
• v.17 no.1
• /
• pp.15-25
• /
• 2016

A number of studies in recent years of have begun to look at the connection between country affinity (an interest in and admiration of a particular country) and a desire to buy the products and services of that country. Country affinity has been shown to be particularly important when consumers lack other sources of information about a good or service. However, except for direct questioning, methods to identify the affinity consumers might have for another country are lacking. This study examines the degree to which attending a movie set in a particular country will be related to an affinity for that country and possibly by extension the goods and services of that country. It is not the goal of this study to suggest that movies create the affinity, but rather that that the affinity will exist for viewers of the films. Two films set in Ireland and featuring Irish actors where shown to audiences composed of Korean students and a small number of Korean adults. As a point of comparison, students in two introductory consumer classes were also asked to complete a similar questionnaire. Four affinity factors were identified from a list of 17 items. Those who attended the historical drama showed a greater affinity for Ireland than those who attended the romantic musical. Affinity for Ireland among Koreans was also meaningful in predicting interest in purchasing Irish products.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.350-353
• /
• 2013

In this paper, a hardware implementation of phase calculator for extracting 3D depth image from TOF(Time-Of-Flight) sensor is proposed. The designed phase calculator, which adopts redundant binary number systems and a pipelined architecture to improve throughput and speed, performs arctangent operation using vectoring mode of DCORDIC algorithm. Fixed-point MATLAB simulations are carried out to determine the optimized bit-widths and number of iteration. The designed phase calculator is verified by emulating the restoration of virtual 3D data using MATLAB/Simulink and FPGA-in-the-loop verification, and the estimated performance is about 7.5 Gbps at 469 MHz clock frequency.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.2
• /
• pp.138-150
• /
• 2016

This study aims to analyze the structure and characteristics of the domestic online game industry using network analysis. In particular, two-mode network analysis is employed to measure the network structure, centrality, and cluster for two types of online game platforms, online games and mobile games, from 1996 to 2014. We also conduct a dynamic analysis to capture the structural changes in the ecosystem by internal and external environmental changes before and after turning point for each online game platform. It is revealed that the online game econsystem has the higher number of clusters and higher concentration ratio than those of mobile game ecosystem. In dynamic analysis, both platforms exhibit similar trends over time with the increasing number of clusters, enlargement of largest cluster's size, and decreasing concentration ratio. This study is expected to provide fruitful implications for strategic decision making of online game companies and policy making for the online game industry.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.5
• /
• pp.1185-1189
• /
• 2016

In modern society, the number of embedded devices has been increasing. However, embedded devices is growing, and the backdoor and vulnerabilities are found continously. It is necessary for this analysis. In this paper, we developed a tool to extract the base address information for the static analysis environment built of the embedded device's firmware. By using this tool, we built the environment for static analysis. As a result, this point enables us to parse the strings and to check the reference. Also, through the increased number of functions, we proved the validity of the tool.