• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.239-246
• /
• 2008

본 연구는 폐타이어 고무분말 개질 아스팔트(crumb rubber modified asphalt, CRMA) 공정조건에서 반응온도, 혼합반응시간 및 유연성 개질제의 영향을 조사하였다. 저온에서 아스팔트바인더와 개질 아스팔트의 온도 민감성과 접착특성은 침입도와 인장접착강도를 통하여 측정하였다. 유연제와 공정온도가 인장접착강도와 강인화 에너지의 중요한 요소임을 확인하였다. 더 높은 혼합온도와 연성 개질제에서 CRMA의 인장접착물성이 향상되는 것은 아스팔트바인더와 개질 아스팔트의 연성구조에 기인한다. CRMA의 물리적 특성의 개선은 CR과 아스팔트바인더간의 상용성에 있다. 유연제가 CR과 아스팔트바인더 안에 침투되어, 유연제에 의해 개질된 CRMA는 CRMA보다 접착특성이 증가하였음을 확인하였다.

• 한국의류학회지
• /
• 제33권1호
• /
• pp.1-10
• /
• 2009

The purpose of this study was to investigate the effects of the types and the colors of men's casual wear, hairstyles, and the methods of stimulus manufacture on men's image perception. The subjects were 360 women from the metropolitan area of Seoul. The clothing types used for the study were a sweater and a jumper(casual jacket) with jean pants. The clothing colors were beige, indigo, and red. Two hairstyles, the short and the medium length hairs, were compared. Two types of stimuli, the photograph and the computer simulation picture, were used. The results of the factor analysis disclosed five dimensions on men's image: neatness, individuality, ability, activity, and sociability. In general, the photograph stimuli were evaluated more positively in activity, individuality, and sociability than the picture stimuli. The sweaters were perceived higher in ability, activity, and sociability than the jumpers. The Indigo color was evaluated as neat. The medium length hairstyles were perceived as neat and the short hairstyles were perceived as sociable. The jumpers were evaluated lower in individuality in the picture stimuli than in the photograph stimuli. The beige and indigo colors were evaluated to be neater in the picture stimuli than in the photograph. When using the picture stimuli, the men's image wearing the sweaters with the medium length hairstyles were evaluated lower in individuality. When using the photograph stimuli, the men's image wearing the sweater with the short hairstyles were evaluated higher in activity. Men's image wearing the indigo jumper and the beige sweater with medium length hairs were evaluated as high in neatness.

• Macromolecular Research
• /
• 제15권7호
• /
• pp.676-681
• /
• 2007

A process designed to synthesize rigid polyurethane foam (PUF) with insulative properties via the modulation of PUF cell size via the addition of clay and the application of ultrasound was assessed. The blowing agents utilized in this study include water, cyclopentane, and HFC-365mfc, all of which are known to be environmentally-friendly blowing agents. The rigid PUFs were prepared from polymeric 4,4'-diphenylmethane diisocyanate (PMDI) and polyether polyol with a density of $50kg/m^3$. In addition, rigid PUFs/clay nanocomposites were synthesized with clay modified by PMDI with and without the application of ultrasound. The PUF generated using water as a blowing agent evidenced the highest tensile strength. The tensile strength of the PUF/nanocomposites was higher than that of the neat PUF and the strength was even higher with the application of ultrasound. The cell size of the PUF/clay nanocomposites was less than that of the neat PUF, regardless of the type of blowing agent utilized. It appears that the higher tensile strength and lower cell size of the PUF/clay nanocomposites may be attributable to the uniform dispersion of the clay via ultrasonic agitation. The thermal conductivity of the PUF/clay nanocomposites generated with HCFC-141b evidenced the lowest value when PUF/clay nanocomposites were compared with other blowing agents, including HFC-365mfc, cyclopentane, and water. Ultrasound has also proven effective with regard to the reduction of the thermal conductivity of the PUF/clay nanocomposites with any of the blowing agents employed in this study. It has also been suggested that the uniformly dispersed clay particles in the PUF matrix function as diffusion barriers, which prevent the amelioration of the thermal insulation property.

• 폴리머
• /
• 제36권5호
• /
• pp.573-578
• /
• 2012

일반적으로 목분/PVC 복합재가 갖는 대부분의 물리적 특성은 소수성인 PVC와 친수성인 목분 사이의 낮은 계면결합력으로 인해 순수한 PVC에 비해서도 낮다. 그러므로 본 연구에서는 목분/PVC의 계면결합력을 향상시키기 위해 세 가지 아미노실란을 각각 사용하여 목분을 개질하였으며, 아미노실란으로 개질된 목분, 무중금속 PVC 컴파운드, 나노점토를 용융혼합하여 환경친화적인 목분/PVC/나노점토 복합재를 제조하였다. 목분의 아미노실란 개질 및 나노점토의 첨가가 복합재의 기계적 특성에 미치는 영향을 조사하였다. 복합재의 기계적 특성은 만능재료시험기, 아이조드 충격시험기, DMA, TMA를 이용하여 조사하였다. 아미노실란으로 개질된 목분을 이용한 복합재의 인장특성은 순수한 목분을 이용한 복합재의 인장특성보다 훨씬 높았다. 또한 적은 양의 나노점토가 복합재의 기계적 특성을 향상시켰다. 아미노실란으로 개질된 목분과 나노점토를 사용함으로써 목분/PVC 복합재의 성능이 크게 향상되었다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.12-18
• /
• 2017

Transparent organic-inorganic hybrid hard coating films were prepared by the addition of $SiO_2$ or $ZrO_2$, as an inorganic filler to improve the hardness property, filler was highly dispersed in the acrylic resin. To improve the compatibility in the acrylic resin, $SiO_2$ or $ZrO_2$ is surface-modified using various silanes with variation of the modification time and silane content. Depending on the content and kind of the modified inorganic oxide, transparent modified inorganic sols were formulated in acryl resin. Then, the sols were bar coated and cured on PET films to investigate the optical and mechanical properties. The optimized film, which has a modified $ZrO_2$ content of 4 wt% markedly improved in terms of the hardness, haze, and transparency as compared to neat acrylate resin and acrylate resin containing modified $SiO_2$ content of 8 wt%. Meanwhile, the low transparency and high haze of these films slowly appeared at $SiO_2$ content above 10 wt% and $ZrO_2$ content of 5 wt%, but the hardness values were maintained at 2H and 3H, respectively, in comparison with the HB of neat acrylate resin.

• Elastomers and Composites
• /
• 제48권1호
• /
• pp.18-23
• /
• 2013

용융상태에서 nylon 12 elastomer에 소량의 dicumyl peroxide (DCP) 와 triallyl cyanuate (TAC)를 첨가하여 nylon 12 elastomer를 부분적으로 가교시켰으며, 이에 따른 nylon 12 elastomer의 기계적, 동적기계적 그리고 유변학적 특성을 tensile test, DMA, small amplitude oscillating rheometer를 이용하여 각각 알아보았다. TAC의 함량이 증가함에 따라 인장탄성률과 영률은 증가하고, 파단신율은 감소하였다. DMA 측정결과, DCP로 부분적으로 가교시킨 nylon 12 elastomer의 PTMG상의 유리전이온도는 순수한 nylon 12 elstomer에 비해 증가하였고, storage modulus는 nylon 12상의 용융온도 이상에서도 거의 일정한 값을 나타내었다. 부분적으로 가교시킴에 따른 유변학적 특성의 변화는 TAC의 함량이 증가함에 따라 solid like behavior와 shear thinning behavior가 점점 뚜렷하게 나타남을 알 수 있었다. 이로부터 nylon 12 elastomer를 용융상태에서 부분적으로 가교시킴으로써 용융가공성을 저하시키지 않으면서, 기계적 물성은 효과적으로 향상시킬 수 있었으며, 특히, nylon 12 elastomer의 사용가능 온도범위를 증가시킬 수 있었다.

• Macromolecular Research
• /
• 제11권5호
• /
• pp.375-381
• /
• 2003

Silver salt complex membranes with glassy poly(methyl methacrylate) (PMMA) unexpectedly showed higher propylene permeance than those with rubbery poly(butyl methacrylate) (PBMA) where as neat PMMA is much less permeable to propylene than that of neat PBMA. Such unusual facilitated olefin transport has been systematically investigated by changing the side chain length of polymethacrylates (PMAs) from methyl, ethyl to butyl. The ab initio calculation showed almost the same electron densities of the carbonyl oxygens in the three PMAs, expecting very similar intensity of the interaction between carbonyl oxygen and silver ion. However, the interaction intensity decreases with the length of the alkyl side chain: PMMA > PEMA > PBMA according to wide angle X-ray scattering and FT-Raman spectroscopy. The difference in the interaction intensity may arise from the difference in the hydrophilicity of the three PMAs, as confirmed by the contact angle of water, which determines the concentrations of the ionic constituents of silver salts: free ion, contact ion pair and higher order ionic aggregate. However, propylene solubilities and facilitated propylene transport vary with the side chain length significantly even at the same concentration of the free ion, the most active olefin carrier, suggesting possible difference in the prohibition of the molecular access of propylene to silver ion by the side chains: the steric hindrance. Therefore, it may be concluded that both the hydrophilicity and the steric hindrance associated with the side chain length in the three PMAs are of pivotal importance in determining facilitated olefin transport through polymer/silver salt complex membranes.

• 한국의류학회지
• /
• 제23권2호
• /
• pp.196-207
• /
• 1999

The purpose of this study was to investigate the differences of the visual evaluation for the Picture image combination of Clothing and Ground. The major finding were as follows ; 1) For the visual evaluation of the Picture image as Clothing variation there were significant differences in all factors 2) For the visual evaluation of the Picture image as Ground variation there were significant differences in Attractiveness Hardness and softness Cuteness Attention Cool and Warm factor 3) For the visual evaluation of the Picture image as Percentage of Clothing there were significant differences in Attractiveness cool and Warm factor. It will Percentage of Clothing there were significant differences in Attractiveness Cool and Warm factor. It will aid in choosing the most beneficial background for any clothing brand. It will enhance the picture images to their full potential in any advertising medium 4) As a result of Regression analysis image effecting on " Preference" is refined-country like harmonious-inharmonious comfortable-uncomfortable beautiful-ugly splendid-dull stable-uneasy live-gentle 5) For the Image effecting on "Harmony" according to clothing image there were significant differences. the results analyzed according to the change of background are as follows. Mdern and strong images formed charming urban and cool visual images with urban and neat artificial backgrounds. Mature images were created with romantic and static artificial backgrounds. Mannish straight and conservative images created charming and rigid visual images in urban and formatted artificial background. Using a white natural background for the urban style created a cool visual image. The use of an interior background lead to warmer images and more defination lines Causal images created a rural and warm image which expressed charm and a soft visual while using a rural and natural background. A most unharmonious and hard image was created when using an urban and formatted artificial background. The coolest visual image was created with a cool and natural background. Feminine and flawless images created urban and neat visual image using an urban and formatted artificial background. The coolest visual image was fresh created with a cool and natural background. natural background.

• 에너지공학
• /
• 제13권4호
• /
• pp.311-318
• /
• 2004

본 연구에서는 정적연소실을 이용하여 차량용 대체연료로써 메란 및 수소첨가 메탄의 연소특성을 수소첨가율, 점화위치 및 점화방법에 따라 고찰하였다. 그 결과, 중심점화이고 수소를 첨가하지 많은 순수 메탄의 화염전파과정은 타원형으로 전파하나 수소첨가율이 증가함에 따라 화염면상에 매우 규칙적인 세포구조를 가진 불안정한 타원형화염으로 천이되었고 연소속도도 증가하였다. 또한, 벽면 및 0.5R 점화이고 수소를 첨가하지 않은 순수 메탄의 화염전파과정은 불안정한 타원형으로 전파하고 있었지만, 수소첨가율이 증가함에 따라 연소중기에 불안정한 타원형에서 평면형으로 천이 됐다가 연소말기에는 화염면 선단이 움푹 패인 매우 불규칙한 세포구조를 갖는 패기형으로 변화되었으며 연소속도도 증가하였다 한편, 세 가지 점화위치 모두에 있어서 MSCDI와 CDI사용에 따른 화염전파형태는 외견상 큰 차이는 없었지만, 동일시간에 MSCDI장치의 화염면적은 CDI의 화염면적보다 약간 더 크게 나타났다.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.856-862
• /
• 2009

This study examined the effects of liquid and solid additives on the morphological, mechanical and thermal insulating properties of rigid polyurethane foams (PUFs). The PUFs synthesized with tetramethylsilane (TEMS) as a liquid-type additive showed a smaller average cell size and lower thermal conductivity than those with the aerosil 200 and clay 30B as solid-type additives. When TEMS was added, the average cell size of the PUF became more uniform and finer due to the reduced surface tension of the polymer solution, which increased the nucleation rate and number of bubbles produced and reduced cell size. The PUFs with TEMS showed the highest closed cell contents among the PUFs prepared using TEMS, aerosil 200 and clay 30B. This suggests that the insulation properties of PUF can be determined by both the size of the cell structure and the amount of closed cell contents in the system. The compression and flexural strengths of the PUF increased slightly when the aerosil 200, clay 30B and TEMS were added compared those of the neat PUF. The reaction profiles of the PUFs showed a similar gel and tack tree time with the reaction time among the PUFs synthesized with three different additives and neat PUF. This suggests that the nucleating additives used in this study do not affect the bubble growth of the chemical reaction, and the additives may act as nucleating agents during the formation of PUF. From the above results of the cell size, thermal conductivity, closed cell contents and reaction profile of the PUFs, liquid-type nucleating agent, such as TEMS, is more effective in decreasing the thermal conductivity of the PUF than solid-type nucleating agent, such as aerosil 200 and clay 30B.