• Transactions on Electrical and Electronic Materials
• /
• v.9 no.3
• /
• pp.91-95
• /
• 2008

In this study, in order to develop the composition ceramics for low loss multilayer piezoelectric actuator application, $Pb(Zn_{1/2}W_{1/2})O_3-Pb(Mn_{1/3}Nb_{2/3})O_3-Pb(Zr,Ti)O_3$ (abbreviated as PZW-PMN-PZT)ceramics according to the amount of $MnO_2$ addition were fabricated using two-stage calcinations method. And also, their dielectric and piezoelectric properties were investigated. At the 0.2 wt% $MnO_2$ added PZW-PMN-PZT ceramics sintered at $930^{\circ}C$, density, electromechanical coupling factor $k_p$, dielectric constant ${\varepsilon}_r$, piezoelectric $d_{33}$ constant and mechanical quality factor $Q_m$ showed the optimum value of $7.84g/cm^3$, 0.543, 1,392, 318.7 pC/N, 1,536, respectively for low loss multilayer ceramics actuator application.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.605-612
• /
• 2000

Four young swamp buffalo cows of similar age ranging in weight between 280 to 380 kg and trained to do physical work were used in a study to determine energy and protein requirements for draught using a $4{\times}4$ Latin square designed experiment. The experiment consisted of field trials employing 4 levels of work load, e.g. no work as control, and loads amounting 450 to 500 Newton (N) pulled continuously for 1, 2 and 3 h daily for 14 consecutive days. Cows were fed king grass (Penisetum purpuroides) ad libitum and were subjected to materials balance trials. Body composition was estimated in vivo by the body density method and daily energy expenditure (EE) was calculated from ME minus retained energy (RE). The results show that EE while not working ($EE_{resting}$) was $0.42kgW^{0.75}MJ/d$ and maintenance ME ($ME_m$) was $0.37kgW^{0.75}MJ/d$. ME requirement increased to 1.65 times maintenance for the work of 3 hours. The energy expended for doing exercise ($E_{exercise}$) was 9.56, 20.0 and 25.86 MJ/cow for treatments 1, 2 and 3 II, respectively. Fat retention was absent in all groups of working cows, but protein retention was only negative for cows undertaking 3 h work. The relationship between $E_{exercise}$ (MJ), work load (F, kN), work duration (t, h) and body mass (W, kg) was found to be: $E_{exercise}=(0.003F^{1.43}t^{0.93})/W^{0.09}MJ$. The maintenance requirement for digestible protein was $2.51kgW^{0.75}g/d$, whereas digestible protein for growth ($DP_{growth}$) and for work ($DP_{work}$) followed the equations: $DP_{growth}=[(258+1.25W^{0.75}){\Delta}Wkg/d]g$ and $DP_{work}=[12.59e^{0.95t}]g$, respectively The coefficients a, b and c for the calculation of $E_{exercise}$ components according to the Lawrence equation were found to be 2.56 J/kgW.m, 5.2 J/kg load carried.m and 0.29, respectively, thus efficiencies to convert ME into work were 0, 16.09, 27.3 and 32.44% for control, 1, 2 and 3 h/d work, respectively. ME and DP requirements for a 250 to 400 kg working buffalo cow allowing to growth up to 0.5 kg/d are presented.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.301-303
• /
• 2001

In this paper we present a Capacitor Charging Power Supply (CCPS) using a series-resonant three-level inverter topology to improve voltage regulation and use semiconductor switches having low blocking voltage capability such as MOSFETs. This inverter can be operated with two modes, Full Power Mode (FPM) and Half Power Mode (HPM). In FPM inverter supplies the high frequency step up transformer with full DC-link voltage and in HPM with half DC-link voltage. HPM switching method will be adopted when CCPS output voltage reaches the preset target value and operates in refresh mode-charge is maintained on the capacitor. In this topology each semiconductor devices blocks a half of the DC-link voltage[2]. A 15kW, 30kV CCPS has been built and will be tested for an electric precipitator application. The CCPS operates from an input voltage of 500VDC and has a variable output voltage between 10 to 30kV and 1kHz repetition rate at 44nF capacitive load [3]. A resonant frequency of 67.9kHz was selected and a voltage regulation of $0.83\%$ has been achieved through the use of half power mode without using the forced cut off the switch current [1]. The theory of operation, circuit topology and test results are given.

• Journal of the Microelectronics and Packaging Society
• /
• v.17 no.2
• /
• pp.49-54
• /
• 2010

The n-type $Bi_2(Te,Se)_3$ powders were fabricated by melting/grinding method and were hot-pressed in order to compare thermoelectric properties of the hot-pressed specimens with those of the $Bi_2(Te,Se)_3$ ingot. Effects of mechanical milling treatment of the $Bi_2(Te,Se)_3$ powders on thermoelectric characteristics of a hot-pressed specimen were also examined. The hot-pressed $Bi_2(Te,Se)_3$ exhibited power factors of $27.3{\sim}32.3{\times}10^{-4}W/m-K^2$ which were superior to $24.2{\times}10^{-4}W/m-K^2$ of the ingot. The $Bi_2(Te,Se)_3$, hot-pressed after mechanical milling treatment of the powders, possessed a non-dimensional figure-of-merit of 1.02 at $100^{\circ}C$ and exhibited extrinsic-intrinsic transition at $130^{\circ}C$.

• Food Science of Animal Resources
• /
• v.37 no.3
• /
• pp.402-409
• /
• 2017

A novel peptide having free radical scavenging activity was separated, using an on-line high-performance liquid chromatography (HPLC) - ABTS screening method, from bovine skim milk fermented by Lactococcus lactis SL6 (KCTC 11865BP). It was further purified using reverse phase-HPLC (RP-HPLC) and sequenced by RP-HPLC-tandem mass spectrometry. The amino acid sequence of the identified peptide was determined to be Phe-Ser-Asp-Ile-Pro-Asn-Pro-Ile-Gly-Ser-Glu-Asn-Ser-Glu-Lys-Thr-Thr-Met-Pro-Leu-Trp (2,362 Da), which is corresponding to the C-terminal fragment of bovine ${\alpha}_{s1}$-casein (f179-199). The hydroxyl radicals scavenging activity ($IC_{50}$ $28.25{\pm}0.96{\mu}M$) of the peptide chemically synthesized based on the MS/MS data showed a slightly lower than that of the natural antioxidant Trolox ($IC_{50}$ $15.37{\pm}0.52{\mu}M$). Furthermore, derivatives of the antioxidant peptide were synthesized. The antioxidative activity of the derivatives whose all three proline residues replaced by alanine significantly decreased, whereas replacement of two proline residues in N-terminal region did not affect its antioxidative activity, indicating that $3^{rd}$ proline in C-terminal region is critical for the antioxidative activity of the peptide identified in this study. In addition, N-terminal region of the antioxidant peptide did not show its activity, whereas C-terminal region maintained antioxidative activity, suggesting that C-terminal region of the peptide is important for antioxidative activity.

• Journal of the Korean Applied Science and Technology
• /
• v.11 no.1
• /
• pp.79-85
• /
• 1994

All the activities and physical properties including surface tension' foaming power, foam stability, emulsifying power, dispersion effect of 3-(N, N-dimethyl N-alkylammonio)-2-hydroxyY-1-propane sulfonate (HSB)류와 3-CN-alkylamidopropyl-N,N-dimethylamm-onjo)-2-hydroxy-1-propane sulfonate (APSB) aquous solution were measured and critical micelle concentration was evaluated. Their cmc of hydroxy sulfobetaine derivatives evaluated by the surface tension method was $1.0{\times}10^{-3}{\sim}1.0{\times}10^{-4}$ mol/l, and surface tension of the aquous solution was decreased to $27{\sim}38dyne/cm$. The experimental results for foaming power, foam stability, emulsifying power in liquid paraffin showed a good surface active properties, especially, dispersion effect in ferric oxide exhibited some efficient surface active properties, and then it would be expected to application as detergent and dispersion agent.

• Korean Journal of Materials Research
• /
• v.29 no.7
• /
• pp.437-442
• /
• 2019

Green $BaSi_2O_2N_2:0.02Eu^{2+}$ phosphor is synthesized through a two-step solid state reaction method. The first firing is for crystallization, and the second firing is for reduction of $Eu^{3+}$ into $Eu^{2+}$ and growth of crystal grains. By thermal analysis, the three-time endothermic reaction is confirmed: pyrolysis reaction of $BaCO_3$ at $900^{\circ}C$ and phase transitions at $1,300^{\circ}C$ and $1,400^{\circ}C$. By structural analysis, it is confirmed that single phase [$BaSi_2O_2N_2$] is obtained with Cmcm space group of orthorhombic structure. After the first firing the morphology is rod-like type and, after the second firing, the morphology becomes round. Our phosphor shows a green emission with a peak position of 495 nm and a peak width of 32 nm due to the $4f^65d^1{\rightarrow}4f^7$ transition of $Eu^{2+}$ ion. An LED package (chip size $5.6{\times}3.0mm$) is fabricated with a mixture of our green $BaSi_2O_2N_2$, and yellow $Y_3Al_5O_{12}$ and red $Sr_2Si_5N_8$ phosphors. The color rendering index (90) is higher than that of the mixture without our green phosphor (82), which indicates that this is an excellent green candidate for white LEDs with a deluxe color rendering index.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.4
• /
• pp.455-465
• /
• 2006

Statement of problem: Many factors influence shade determination in clinical practice and shade matching is highly affected by the viewing conditions. Purpose : This study investigated the differences in shade perception among distinct groups of dental personnel (10 prosthodontists, 10 general practitioners, 10 last-year dental students and 10 dental technicians) Material and method: Four groups of dental personnel were investigated. They were tested to eliminate color blindness. To compare shade selection ability, they were asked to match four test tabs of shades A3, B2, C2 and D4 (VITAPAN$^{(R)}$ Classical shade guide. The identification codes of the shade tabs were masked to prevent shade memory. ) against another full set of VITA$^{(R)}$ PAN$^{(R)}$ Classical shade guide under similar lighting conditions. Shade selections were randomly repeated five times every week and then the repeatability between dental personnel was evaluated. To compare value perception ability, they were asked to arrange randomly selected five test tabs (Bl, A2, D2, C3, A4) in descending order from the brightest to the darkest. To compare hue determination ability, they were asked to divide selected eight test tabs (n, A3, B2, B3, C2, C3, D2, D3) into four groups by manufacturer as follows : Group A-Reddish brown, Group B-Reddish yellow. Group C-Grey. Group D-Reddish grey. Results and conclusion : The obtained results were as follows : 1. For the value perception ability and hue determination ability. there was no significant difference among 4 groups: prosthodontists, general practitioners, dental students, dental technicians (P>.05). 2. For shade selection ability, the prosthodontists and dental technicians were significantly higher than dental students(P<.05). 3. The repeatability of selected shade in the dental technicians was significantly higher than that of general practitioners and dental students(P<.05). 4. The prosthodontists and dental technicians had significantly higher selection ability than dental students for shade B2 (P<.05).

• Korean Journal of Ichthyology
• /
• v.13 no.3
• /
• pp.161-165
• /
• 2001

Artificial fertilization (dry method) of mature right-eye flounder, Limanda yokohamae (female : 25.1~30.4 cm in total length (TL), male : 24.5~28.5 cm in TL), obtained from the fish market in Dolsan-do, Yosu was performed in the Fisheries Exhibition. Hatched larvae and juveniles were reared to describe their morphological development. Newly hached larvae attained 3.13~3.42 mm in TL. Their eyes were yellowish brown and their mouth and anus were not yet opened. Three to six days after hatching the larvae attained 3.35~4.61 mm in TL. Their mouth and anus were open and the yolk sac was almost absorbed. Feeding activity increased as the mouth became larger. At 25 days, the larvae attained 5.47~5.91 mm in TL. The caudal notocord was flexed $45^{\circ}$ upward. At 35 days, the larvae attained 6.83~7.60 mm in TL. Rays of the dorsal and anal fins were formed, and the left eye was moved slightly to the right side of the head. At 55 days, the juveniles attained 9.38~11.73 mm in TL. The left eye was moved completely onto the right side. All of the fins had complete set of the fin rays, and the juveniles spent most of the time on the bottom resting on their blind side (D. 68~70 : A. 50~52 : P. 11: V. 6 : C. 18~19).

• Korean Journal of Materials Research
• /
• v.28 no.9
• /
• pp.489-494
• /
• 2018

Lead free $(1-x)(0.675BiFeO_3-0.325BaTiO_3)-xLiTaO_3$ (BFBTLT, x = 0, 0.01, 0.02, and 0.03, with 0.6 mol% $MnO_2$ and 0.4 mol% CuO) were prepared by a solid state reaction method, followed by air quenching and their crystalline phase, morphology, dielectric, ferroelectric and piezoelectric properties were explored. An X-ray diffraction study indicates that lithium (Li) and tantalum (Ta) were fully incorporated in the BFBT materials with the absence of any secondary phases. Dense ceramic samples (> 92 %) with a wide range of grain sizes from $3.70{\mu}m$ to $1.82{\mu}m$ were obtained in the selected compositions ($0{\leq}x{\leq}0.03$) of BFBTLT system. The maximum temperatures ($T_{max}$) were mostly higher than $420^{\circ}C$ in the studied composition range. The maximum values of maximum polarization ($P_{max}{\approx}31.01{\mu}C/cm^2$), remnant polarization ($P_{rem}{\approx}22.82{\mu}C/cm^2$) and static piezoelectric constant ($d_{33}{\approx}145pC/N$) were obtained at BFBT-0.01LT composition with 0.6 mol% $MnO_2$ and 0.4 mol% CuO. This study demonstrates that the high $T_{max}$ and $d_{33}$ for BFBTLT ceramics are favorable for industrial applications.