• 전자공학회논문지B
• /
• 제33B권11호
• /
• pp.22-30
• /
• 1996

In this paper, the properties and the design procedures of the internal model control (IMC) structures are discussed and a new nonlinear IMC(NIMC) strategy is proposed. The IMC controllers are simply inverse controller in principle but the development of a NIMC poses difficulties due to the inherent complexity of nonlinear systems. Existing design mehtods are a few and not easy to implement. The proposed approach is using multiple linear models, linear IMC controllers, and swiching scheme instead of using nonlinear model/controller. The advantages of the new approach are that we can use linear IMC mehtod which are now well estabilished and need not global nonlinear models.

• Korea-Australia Rheology Journal
• /
• 제12권3_4호
• /
• pp.181-186
• /
• 2000

Rheological Properties of polypropylenes having different molecular structures (linear polypropylene (PPL) and branched one (PPB)) were studied. Both the extensional flow and oscillatory shear flow properties were checked. Especially, the melt strength of polypropylenes having various shear history were investigated by using in-house-made Rheometer (called SMER). Compared to linear polypropylene, the branched polypropylene shows enhanced melt strength during extensional flow due to the retarded relaxation of molecules. When the slope of melt tension was plotted against take up speed of melt strand, the characteristic peak was observed in case of branched polypropylene, while the linear polypropylene shows only monotonously decreasing pattern. This entanglement was partially disrupted by physical forces such as shear during melt extrusion. However, the melt strength of PPB after multiple extrusion is still higher than PPL, implying the loss of elasticity during multiple extrusion is not so comprehensive. On dynamic experiments, PPB shows typical shear thinning behavior and the tangent delta of PPB is lower than PPL, reflecting high elasticity of PPB.

• 한국공작기계학회논문집
• /
• 제13권4호
• /
• pp.23-29
• /
• 2004

In this study, four kinds of $Si_3N_4$-based ceramic cutting tools with different sintering time were fabricated to investigate the relation among mechanical properties, grain size and tool life. They were used to turn gray cast iron at a cutting speed of 330m/min and depth of cut of 0.5mm and 1mm in dry, continuos cutting conditions. Multiple linear regression model was used to determine the relations among the mechanical property, grain size and the density. It was found that the combination of hardness and fracture toughness showed a good relation with tool life. It was also shown that hardness was the most important single element for the tool life.

• 경영과학
• /
• 제16권1호
• /
• pp.63-74
• /
• 1999

This paper presents a R&D investment model for the Information and telecommunications(l&T) technology using multiple objective linear programming(MOLP). The MOLP model involves the simultaneous maximization of three linear objective functions associated with three criteria, which are social, technological, and economic criterion. This model is different from the traditional one which only involves the maximization of economic criterion. It yields a suitable R&D investment ratio to each technology field. Its application to the National R&D Project in l&t Industry is also presented. In this application, the Analytic Hierarchy Process(AHP) is proposed to estimate the weights, which used as the coefficients in each objective function of the MOLP model. Then the problem is solved using the interactive method STEM. It is showed that with the aid of STEM, the MOLP model can be useful decision aid in formulation R&D investment plan in l&t industry. It is expected that the MOLP model works as the basis for planning R&D investment strategy in l&T industry.

• 한국군사과학기술학회지
• /
• 제20권2호
• /
• pp.272-278
• /
• 2017

In this paper, we consider a single-channel amplitude comparison monopulse system(SCACMS). The monopulse ratio curve(MR-C) of the SCACMS can be controlled by an amplitude difference between sum and different signal, a phase difference and the coefficient of the signal processor. We first propose the SCACMS with multiple variables, and then apply a genetic algorithm to optimize the multiple variables in terms of minimizing a root mean square error. The simulation results show that when three variables of the SCACMS are jointly optimized, the linear region of the MR-C can be extended approximately 187 % compared to that of two variables.

• 한국통신학회논문지
• /
• 제16권7호
• /
• pp.598-609
• /
• 1991

단일 직선선로의 불요 복사에 대한 이론을 확장하여, PCB와 같이 다수의 비직선 선로에 임의의 선로가 개별적으로 전송될때 이 PCB 전체에서 발생하는 불요전자파 복사의 크기를 정량적으로 구할수 있는 보다 일반화된 해석 방법을 얻기 위하여 복사현상의 회로모형을 배열 안테나 이론에 적용하여 구했다. 제안된 해석방법의 타당성을 확인하깅 ㅟ해 2개 및 3개의 사로 다른 임의의 비직선 각종선로에 600MHz의 신호원을 인가하여 시뮬레이션한 결과와 측정된 불요복사 특성과 비교하여 서로 잘 일치함을 확인하였다.

• 대한화학회지
• /
• 제58권6호
• /
• pp.543-552
• /
• 2014

A quantitative structure activity relationship (QSAR) study is performed for modeling and prediction of oral bioavailabilities of 216 diverse set of drugs. After calculation and screening of molecular descriptors, linear and nonlinear models were developed by using multiple linear regression (MLR), artificial neural network (ANN), support vector machine (SVM) and random forest (RF) techniques. Comparison between statistical parameters of these models indicates the suitability of SVM over other models. The root mean square errors of SVM model were 5.933 and 4.934 for training and test sets, respectively. Robustness and reliability of the developed SVM model was evaluated by performing of leave many out cross validation test, which produces the statistic of $Q^2_{SVM}=0.603$ and SPRESS = 7.902. Moreover, the chemical applicability domains of model were determined via leverage approach. The results of this study revealed the applicability of QSAR approach by using SVM in prediction of oral bioavailability of drugs.

• 정보처리학회논문지A
• /
• 제12A권5호
• /
• pp.421-426
• /
• 2005

대규모 병렬 연산에 있어서, 계산 노드 혹은 이들을 연결한 통신 네트워크의 장애는 연산 실패로 끝나며, 소중한 계산 시간이 낭비된다. 그러나 현재의 MPI 표준은 이에 대한 대안을 제시하지 않고 있다. 본 논문에서는, 비표준의 무정지형 MPI 라이브러리가 아닌 MPI 표준 함수들만을 사용하여, MPMD 방식의 비동기 연산을 도입한 응용 수준의 무정지형 선형 시스템의 해법을 제안한다.

• 한국통신학회논문지
• /
• 제21권2호
• /
• pp.347-356
• /
• 1996

In this paper, we present the circular array structure for estimating the temporal and spatial specturm of multiple narrowband incoherent signals which have different frequencies. The conventional linear array is computationally demanding for simultaneously estimating the spatial and temporal spectrum since it requires the tapped delay line filer. The statistical performance of the circular array is never deteriorated eve though it requires much less computational load than the uniform linear array. Especially, it is shown that the circular array resolves the direction-of-arrivals of the multiple signals without the spatial and temporal aliasing the fundamental nonuniform-sampling property prossessed by it. Computer simulation results are shown to demonstrate the better performance achieved with the circular array geometry relative to that obtained with a uniform linear array with taps.

• ETRI Journal
• /
• 제40권5호
• /
• pp.570-581
• /
• 2018

This work analyzes the performance of implementable detectors for the multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) technique under specific and realistic operation system conditions, including antenna correlation and array configuration. A time-domain channel model was used to evaluate the system performance under realistic communication channel and system scenarios, including different channel correlation, modulation order, and antenna array configurations. Several MIMO-OFDM detectors were analyzed for the purpose of achieving high performance combined with high capacity systems and manageable computational complexity. Numerical Monte Carlo simulations demonstrate the channel selectivity effect, while the impact of the number of antennas, adoption of linear against heuristic-based detection schemes, and the spatial correlation effect under linear and planar antenna arrays are analyzed in the MIMO-OFDM context.