• 전력전자학회논문지
• /
• 제14권6호
• /
• pp.504-513
• /
• 2009

본 논문에서는 조명용 LED 구동 장치를 위한 새로운 방식의 LED 구동 모듈화 방법을 제안한다. 제안된 LED 구동 회로는 플라이백 컨버터를 이용하여 교류 입력 전원의 핫 접지와 LED 구동부의 콜드 접지를 절연한다. LED 전류 제어를 용이하게 하기위해 플라이백 컨버터를 동특성이 뛰어난 불연속 모드로 동작시키고, KIA2431을 이용하여 귀환 루프 제어를 한 후, 그에 대한 특성을 파악한다. 제안된 LED 구동 모듈은 폭넓은 교류 전원 입력 범위와 PWM 제어 IC를 직접 제어하여 버스트 디밍을 구현하고 넓은 범위의 LED 밝기 조절이 가능하게 하였다. 본 논문에서는 제안된 LED 구동 모듈에 대한 동작 원리를 설명하고 LED 구동 모듈을 실제로 구현 및 적용하여 제안된 구동 모듈의 유용성을 입증하였다. 또한, 소형화와 모듈화 된 LED 구동 모듈을 병렬로 연결한 다 채널 LED 구동 장치를 제안하고 그 타당성을 검증하였다.

• 한국멀티미디어학회논문지
• /
• 제19권2호
• /
• pp.352-359
• /
• 2016

This paper presents high efficiency 5A synchronous DC-DC buck converter. The proposed DC-DC buck converter works from 4.5V to 18V input voltage range, and provides up to 5A of continuous output current and output voltage adjustable down to 0.8V. This chip is packaged MCP(multi-chip package) with control chip, top side P-CH switch, and bottom side N-CH switch. This chip is designed in a 25V high voltage CMOS 0.35um technology. It has a maximum power efficiency of up to 94% and internal 3msec soft start and fixed 500KHz PWM(Pulse Width Modulation) operations. It also includes cycle by cycle current limit function, short and thermal shutdown protection circuit at 150℃. This chip size is 2190um*1130um includes scribe lane 10um.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권3호
• /
• pp.186-190
• /
• 2005

In this paper, the pipelined A/D converter with multi S/H stage structure is proposed for high resolution and high-speed data conversion rate. In order to improve a resolution and operational speed, the proposed structure increased the sampling time that is sampled input signal. In order to verify the operation characteristics, 20MS/s pipelined A/D converter is designed with two S/H stage. The simulation result shows that INL and DNL are $0.52LSB\~-0.63LSB$ and $0.53LSB\~-0.56LSB$, respectively. Also, the designed Analog-to-Digital converter has the SNR of 43dB and power consumption is 18.5mW.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 추계학술대회 논문집
• /
• pp.124-126
• /
• 2004

This paper describes a boost converter cascaded high frequency link direct do-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.245-249
• /
• 2005

This paper describes a boost converter cascaded high frequency link direct dc-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.177-178
• /
• 2015

This paper presents a neutral point deviation compensating control algorithm applied to a 3-level NPC converter. The neutral point deviation is analyzed with a focus on the current flowing out of or into the neutral point of the dc link. Based on the zero sequence components of the reference voltages, this paper analyzes the neutral point deviation and balancing control for 3-level NPC converter. An analytical method is proposed to calculate the injected zero sequence voltage for NP balancing based on average neutral current. This paper also proposes a control scheme compensating for the neutral point deviation under generalized unbalanced grid operating conditions. The positive and negative sequence components of the pole voltages and ac input currents are employed to accurately explain the behavior of 3-level NPC converter. Simulation and experimental results for a test set up of 30kW are shown to verify the validity of the proposed algorithm.

• 전력전자학회논문지
• /
• 제5권6호
• /
• pp.568-574
• /
• 2000

본 논문에서는 6-펄스 싸이리스터 컨버터에 간단한 보조회로를 추가하여 펄스 수를 증대시키는 방식을 제안한다. 제안한 방식으로 6-펄스 컨버터는 12-펄스, 18-펄스 및 24-펄스 동작을 하여 입력전류 뿐만 아니라 출략전압에서도 파형의 개선효과룹 가셔온다. 또한 입력전류 및 출력전압의 해석을 통하여 시스템의 전 위상각에 대한 보 조싸이라스터의 최적제어각을 계산하고 실험을 통하여 본 방식의 타딩성을 입증한다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.360-363
• /
• 2002

In the resonant converters which can provide high efficiency and high power density, the resonant voltage stress is about $4\~5$ times the input voltage. It needs the power switch with high ratings. This is a reason why the conduction loss is increased. In this paper, it proposes the alternately zero voltage switched forward, flyback multi resonant converter topology for reducing the voltage stress using alternately zero voltage switching technique. And the proposed AT forward MRC Is experimentally considered about the loop gain with HP4194A network analyzer

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제15권5호
• /
• pp.504-510
• /
• 2015

This paper presents a power and area efficient SAR ADC for multi-channel near threshold-voltage (NTV) applications such as neural recording systems. This work proposes a split dual-capacitive-array (S-DCA) structure with shifted input range for ultra low-switching energy and architecture of multi-channel single-ended SAR ADC which employs only one comparator. In addition, the proposed ADC has the same amount of equivalent capacitance at two comparator inputs, which minimizes the kickback noise. Compared with conventional SAR ADC, this work reduces the total capacitance and switching energy by 84.8% and 91.3%, respectively.

• Journal of Power Electronics
• /
• 제17권6호
• /
• pp.1422-1432
• /
• 2017

This paper presents a buck-boost converter-based bipolar pulse generator, which is able to generate bipolar exponential pulses across a resistive load. The concept of the proposed approach depends on operating the involved buck-boost converters in discontinuous current conduction mode with high-voltage gain and enhanced efficiency. A full design of the pulse generator and its passive components is presented to ensure generating the pulses with the desired specifications (rise time, pulse width, and pulse magnitude) for a given load resistance and input dc voltage. In case of moderate pulsed output voltages (i.e. few of kV), one module of the presented bipolar generator can be employed. While in case of high-voltage pulsed output, multi-module version can be employed, where each module is fed from an isolated dc source and their outputs are connected in series. Simulation models for the proposed approach are built to elucidate their performance in case of one-module as well as multi-module based generator. Finally, a scaled-down prototype for one-module of buck-boost converter-based bipolar pulse generator is implemented to validate the proposed concept.