• Structural Engineering and Mechanics
• /
• 제55권5호
• /
• pp.953-964
• /
• 2015

A model has been proposed that can predict the ultimate torsional strength of single-box multi-cell reinforced concrete box girder under combined loading of bending, shear and torsion. Compared with the single-cell box girder, this model takes the influence of inner webs on the distribution of shear flow into account. According to the softening truss theory and thin walled tube theory, a failure criterion is presented and a ultimate torsional strength calculating procedure is established for single-box multi-cell reinforced concrete box girder under combined actions, which considers the effect of tensile stress among the concrete cracks, Mohr stress compatibility and the softened constitutive law of concrete. In this paper the computer program is also compiled to speed up the calculation. The model has been validated by comparing the predicted and experimental members loaded under torsion combined with different ratios of bending and shear. The theoretical torsional strength was in good agreement with the experimental results.

• 인터넷정보학회논문지
• /
• 제23권5호
• /
• pp.9-15
• /
• 2022

본 논문은 매크로 기지국(Macro base station, MBS) 커버리지에 위치한 건물 내부의 밀집된 스몰셀 네트워크 환경에서 매크로 사용자 단말(Macro user equipment, MUE)의 성능향상을 위한 채널 선택 기반 다중점 협력통신(Coordinated multi-point, CoMP) 방법을 제안한다. 제안하는 CoMP 방법에서 건물 내에 위치한 MUE의 성능향상을 위해 스몰셀 기지국(Small-cell base station, SBS)들이 이웃한 MUE에게 간섭을 적게 미치는 방법으로 채널을 선택하고 CoMP가 필요한 MUE에게 적절한 신호를 송신한다. 시뮬레이션 결과에서 제안하는 CoMP 방법이 기존의 랜덤채널할당 기반의 스몰셀 네트워크 방법과 CoMP방법보다 MUE의 성능을 각각 최대 164%와 51%까지 향상시킨다.

• 대한전자공학회논문지SD
• /
• 제48권10호
• /
• pp.25-32
• /
• 2011

MLC NAND flash memory에서 cell간의 기생 커패시턴스 커플링으로 인해 발생하는 CCI에 의한 data error를 개선하기 위한 알고리듬을 제안하였다. 종래의 victim cell 주변 8-cell model보다 에러보정 알고리듬에 적용이 용이한 3-cell model을 제시하였다. 3-cell CCI model의 성능을 입증하기 위해 30nm와 20nm급 공정의 MLC NAND flash memory의 data분포를 분석하여, 주변 cell의 data pattern에 의한 victim cell의 Vth shift관계를 확인하였다. 측정된 Vth분포 data에 MatLab을 이용하여 제안된 알고리듬을 적용하는 경우 BER이 LSB에서는 28.9%, MSB에는 19.8%가 개선되었다.

• 한국전기전자재료학회논문지
• /
• 제16권9호
• /
• pp.771-774
• /
• 2003

In this paper, the programming characteristics of the multi-bit devices based on SONOS structure are investigated. Our devices have been fabricated by 0.35 $\mu\textrm{m}$ complementary metal-oxide-semiconductor (CMOS) process with LOCOS isolation. In order to achieve the multi-bit operation per cell, charges must be locally frapped in the nitride layer above the channel near the source-drain junction. Programming method is selected by Channel Hot Electron (CUE) injection which is available for localized trap in nitride film. To demonstrate CHE injection, substrate current (Isub) and one-shot programming curve are investigated. The multi-bit operation which stores two-bit per cell is investigated. Also, Hot Hole(HH) injection for fast erasing is used. The fabricated SONOS devices have ultra-thinner gate dielectrics and then have lower programming voltage, simpler process and better scalability compared to any other multi-bit storage Flash memory. Our programming characteristics are shown to be the most promising for the multi-bit flash memory.

• 한국통신학회논문지
• /
• 제33권10B호
• /
• pp.911-918
• /
• 2008

본 논문에서는 방향성 안테나를 이용하여 3섹터 구조를 갖는 Narrow-Beam Trisector Cell (NBTC)과 Wide-Beam Trisector Cell (WBTC) 구조의 WiBro 시스템에 IEEE802.16j 기반의 멀티홉 중계기를 도입하여 커버리지를 확장하는 새로운 형태의 NBTC와 WBTC 구조를 제안한다. 제안한 구조는 최적화 모델을 통해 트래픽 분포에 따른 최적 배치된 기지국과 멀티홉 중계기의 수, 각 기지국의 확장되는 커버리지, 그리고 설치비용 등을 기지국만 배치하는 기존의 전형적인 구조와 비교 분석하였다. 분석 결과를 통해 주어진 전체면적에 중계기를 효율적으로 배치한다면 절약되는 설치비용을 알 수 있었고, 제안하는 멀티홉 중계기가 도입된 NBTC와 WBTC 방식 중에서 트래픽 분포가 높은 지역에서는 WBTC 방법을 이용하고, 트래픽 분포가 적은 지역에서는 NBTC 방법을 이용한다면 커버리지 확장과 설치비용 절약 측면에서 보다 효율적임을 알 수 있었다.

• Industrial Engineering and Management Systems
• /
• 제15권2호
• /
• pp.131-142
• /
• 2016

We consider a multi-server queueing system without buffer and with two types of customers as a model of operation of a mobile network cell. Customers arrive at the system in the marked Markovian arrival flow. The service times of customers are exponentially distributed with parameters depending on the type of customer. A part of the available servers is reserved exclusively for service of first type customers. Customers who do not receive service upon arrival, can make repeated attempts. The system operation is influenced by random factors, leading to a change of the system parameters, including the total number of servers and the number of reserved servers. The behavior of the system is described by the multi-dimensional Markov chain. The generator of this Markov chain is constructed and the ergodicity condition is derived. Formulas for computation of the main performance measures of the system based on the stationary distribution of the Markov chain are derived. Numerical examples are presented.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1925-1930
• /
• 2016

Fuel cell power generation system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. This paper presents the control of interleaved multi-phase boost converter as the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. PSIM simulation program is to be used to implement the modeling of the electrical fuelcell as well as traction motor control with interleaved multi-phase boost converter. Comparing the input current ripple rate, two-phase interleaved boost converter is less than the boost converter. But the more multi-phase not less proportional to the ripple factor. we confirmed that the amplitude of the input current ripple rate of converter depend on duty ratio.

• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.29-33
• /
• 2003

Tri-crystalline silicon wafers have three different orientations and three-grain boundaries. In this paper, tri-crystalline silicon (tri-Si) wafers have been used for the fabrication of buried contact solar cells. The optical and micro-structural properties of these cells after texturing in KOH solution have been investigated and compared with those of cast mult- crystalline silicon (multi-Si) wafers. We employed a cost effective fabrication process and achieved buried contact solar cell (BCSC) energy conversion efficiencies up to $15\%$ whereas the cast multi-Si wafer has efficiency around $14\%$.

• 전자공학회논문지S
• /
• 제34S권10호
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.281-286
• /
• 2013

As the product lifecycle is getting shorter and various models should be released to respond to the needs of customers and markets, automation-based flexible production line has been recognized as the core competitiveness. According to these trends, system vendors supply cell-level systems such as FMC(Flexible Manufacturing Cell) that is integration of core functions of FMS(Flexible Manufacturing System) and RMC(Reconfigurable Manufacturing Cell) that can easily extend components of FMC. In the cell-based environment, flexible management for shop floor composed of existing job shop, FMCs and RMCs from various system vendors has emerged as an important issue. However, there could be some problems on integrated operation between heterogeneous cells to use vendor-specific cell controllers and on seamless information flow with high level systems such as ERP(Enterprise Resource Planning). In this context, this paper proposes process management systems supporting integrated shop operation of heterogeneous multi-cell based flexible manufacturing environment: First of all, (1) Integrated Shop Operation System to apply the process management system is introduced, and (2) Multi-Layer BOP(Bill-Of-Process) model, a backbone of the process management system, is derived with its data structure. Finally, application of the proposed model is illustrated through system implementation results.