• The Transactions of the Korean Institute of Power Electronics
• /
• v.15 no.4
• /
• pp.288-295
• /
• 2010

Multi-level inverters have drawn much of attention in recent years because it can meet the demand of high power applications and good power quality associated with reduced harmonic distortion. As the number of voltage level increases, field programmable gate arrays (FPGAs) are suitable for the implementation of multi-level modulation algorithm. This paper proposes the implementation method for generating PWM pulses at the three phase diode clamped five-level inverter using FPGA. The strategy for communicating stably the data of three-phase reference voltages between the DSP and FPGA is suggested. The techniques for generating PWM signals based on a multi-carrier modulation method are carried out through the experiments with 32-bit DSP and Cyclone-III FPGA.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.255-262
• /
• 2002

In this paper, an improved multi-objective optimmum design method is proposed. And it is applied to steel frames under seismic loads. The multi-objective optimization problem is formulated with three optimality criteria, namely, minimum structural weight and maximum strain energy and stability. The Pareto curve can be obtained by performing the multi-objective optimization for multistory shear buildings. In order to efficiently solve the multi-objective optimization problem the decomposition method that separates both system-level and element-level is used. In addition, various techniques such as effective reanalysis technique with respect to intermediate variables and sensitivity analysis using an automatic differentiation (AD) we incorporated. Moreover, the relationship function among section properties induced from the profile is used in order to link system-level and element level. From the results of numerical investigation, it may be stated that the proposed method will lead to the more rational design compared with the conventional one.

• Journal of the Korean housing association
• /
• v.11 no.1
• /
• pp.171-181
• /
• 2000

The purpose of the resent research is to investigate the characteristics of sound insulation at the circular voided concrete slab in the multi-housing. In order to do this research, the method for field measurement of floor impact sound level was used following the Korea Standard F2810-1996. For the multi-housing, three kinds of circular voided concrete slabs are used to measure the characteristics of sound insulation.The results are as follows; 1.The main factor affecting the characteristics of sound insulation at the circular voided concrete slab in the multi-housing is sound-absorbing materials in the circular tube. 2. The main factor to effect the difference of sound pressure level is circular tube in the concrete slab. 3. The forms of circular tubes effect the characteristics of sound insulation at the circular tube. 4. Sound Pressure Level resulting from the piping direction of circular tubes in little different to octave band level.More study will be needed about the depth and distance of sound insulation materials, and the components of sound insulation materials for the multi-housing.

• The KIPS Transactions:PartB
• /
• v.12B no.5 s.101
• /
• pp.587-594
• /
• 2005

This paper proposes a multi-level thresholding method for image segmentation using fuzzy clustering algorithm in transition region. Most of threshold-based image segmentation methods determine thresholds based on the histogram distribution of a given image. Therefore, the methods have difficulty in determining thresholds for real-image, which has a complex and undistinguished distribution, and demand much computational time and memory size. To solve these problems, we determine thresholds for real-image using fuzzy clustering algorithm after extracting transition region consisting of essential and important components in image. Transition region is extracted based on Inか entropy, which is robust to noise and is well-known as a tool that describes image information. And fuzzy clustering algorithm can determine optimal thresholds for real-image and be easily extended to multi-level thresholding. The experimental results demonstrate the effectiveness of the proposed method for performance.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.73-82
• /
• 2005

This paper proposes a multi-level thresholding method using weighted FCM(Fuzzy C-Means) algorithm in color image. FCM algerian determines a more optimal thresholding value than the existing methods and can extend to multi-level thresholding. But FCM algerian is sensitive to noise because it doesn't include spatial information. To solve the problem, we can remove noise by applying a weight based on entropy that is obtained from neighboring pixels to FCM algerian. And we determine the optimal cluster number by using within-class distance in code image based on the clustered pixels of each color component. In the experiments, we show that the proposed method is more tolerant to noise and is more superior than the existing methods.

• Archives of Plastic Surgery
• /
• v.38 no.5
• /
• pp.642-648
• /
• 2011

Purpose: The recent advances in microsurgical techniques and their refinement over the past decade have greatly expanded the indications for digital replantations and have enabled us to salvage severed fingers more often. Many studies have reported greater than 80% viability rates in replantation surgery with functional results. However, replantation of multi-level amputations still remain a challenging problem and the decision of whether or not to replant an amputated part is difficult even for an experienced reconstructive surgeon because the ultimate functional result is unpredictable. Methods: Between January of 2002 and May of 2008, we treated 10 multi-level amputated digits of 7 patients. After brachial plexus block, meticulous replantation procedure was performed under microscopic magnification. Postoperatively, hand elevation, heat lamp, drug therapy and hyperbaric oxygen therapy were applied with careful observation of digital circulation. Early rehabilitation protocol was performed for functional improvement. Results: Among the 19 amputated segments of 10 digits, 16 segments survived completely without any complications. Overall survival rate was 84%. Complete necrosis of one finger tip segment and partial necrosis of two distal amputated segments developed and subsequent surgical interventions such as groin flap, local advancement flap and skin graft were performed. The overall result was functionally and aesthetically satisfactory. Conclusion: We experienced successful replantations of multi-level amputated digits. When we encounter a multi-level amputation, the key question is whether or not it is a contraindication to replantation. Despite the demand for skillful microsurgical technique and longer operative time, the authors' results prove it is worth attempting replantations in multi-level amputation because of the superiority in aesthetic and functional results.

• Journal of Korean Society for Quality Management
• /
• v.47 no.4
• /
• pp.701-711
• /
• 2019

Purpose: The problem of optimizing redundancy allocation in multi-level systems is considered when each item in a multi-level system has alternative items with the same function. The number of redundancy of multi-level system is allocated to maximize the reliability of the system under path set and cost limitation constraints. Methods: Based on cost limitation and path set constraints, a mathematical model is established to maximize system reliability. Particle swarm optimization is employed for redundant allocation and verified by numerical experiments. Results: Comparing the particle swarm optimization method and the memetic algorithm for the 3 and 4 level systems, the particle swarm optimization method showed better performance for solution quality and search time. Particularly, the particle swarm optimization showed much less than the memetic algorithm for variation of results. Conclusion: The proposed particle swarm optimization considerably shortens the time to search for a feasible solution in MRAP with path set constraints. PS optimization is expected to reduce search time and propose the better solution for various problems related to MRAP.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.791-794
• /
• 2003

The increasing computational capability of processors is driving the need for high bandwidth links to communicate and store the information that is processed. Such links are often an important part of multi processor interconnection, processor-to-memory interfaces and Serial-network interfaces. This paper describes a 0.11-${\mu}{\textrm}{m}$ CMOS 4 Gbp s/pin 3-Level transceiver using RSL/(Rambus Signaling Logic) for high bandwidth. This system which uses a high-gain windowed integrating receiver with wide common-mode range which was designed in order to improve SNR when operating with the smaller input overdrive of 3-Level. For multi-gigabit/second application, the data rate is limited by Inter-Symbol Interference (ISI) caused by low pass effects of channel, process-limited on-chip clock frequency, and serial link distance. In order to detect the transmited 4Gbps/pin with 3-Level data sucessfully ,the receiver is designed using 3-stage sense amplifier. The proposed transceiver employes multi-level signaling (3-Level Pulse Amplitude Modulation) using clock multi phase, double data rate and Prbs patten generator. The transceiver shows data rate of 3.2 ~ 4.0 Gbps/pin with a 1GHz internal clock.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.5 no.4
• /
• pp.87-97
• /
• 2009

Internet network routing system is used to prevent spread and distribution of malicious data traffic. This study is based on analysis of diagnostic weakness structure in the network security domain. We propose an improved integrated multi-level protection domain for in the internal route of groupware. This paper's protection domain is designed to handle the malicious data traffic in the groupware and finally leads to lighten the load of data traffic and improve network security in the groupware. Infrastructure of protection domain is transformed into five-stage blocking domain from two or three-stage blocking. Filtering and protections are executed for the entire server at the gateway level and internet traffic route ensures differentiated protection by dividing into five-stage. Five-stage multi-level network security domain's malicious data traffic protection performance is better than former one. In this paper, we use a trust evaluation metric for measuring the security domain's performance and suggested algorithm.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.10 no.1
• /
• pp.55-60
• /
• 2010

For battery-powered device applications, which grow rapidly in the electronic market today, low-power becomes one of the most important design issues of CMOS VLSI circuits. A multi-VDD system, which uses more than one power-supply voltage in the same system, is an effective way to reduce the power consumption without degrading operating speed. However, in the multi-VDD system, level converters should be inserted to prevent a large static current flow for the low-to-high conversion. The insertion of the level converters induces the overheads of power consumption, delay, and area. In this paper, we propose a new level converter which can provide the level up/down conversions for the various input and output voltages. Since the proposed level converter uses only one power-supply voltage, it has an advantage of reducing the complexity in physical design. In addition, the proposed level converter provides lower power and higher speed, compared to existing level converters.