• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.107-113
• /
• 2006

This paper presents an efficient dynamic modeling method for multi-stepped rotor system using effective spring elements to take into account the structural weakening effect due to the steps. This paper demonstrates that the Timoshenko shaft model give rise to a significant error in the case of multi-stepped rotors. An effective bending spring model is introduced to represent the structural weakening effect in the presence of steps. The proposed modeling method is validated through a series of simulations and experiments. Finally, a spindle is dealt with as an analysis example.

• 한국소음진동공학회논문집
• /
• 제14권10호
• /
• pp.983-989
• /
• 2004

In this paper, a modeling method for the vibration analysis of rotating structures employing multi-reference frames is presented. The geometric stiffening effect that results from centrifugal inertia force is considered. In most previous studies single reference frame has been employed for the analysis. In the present study, a modeling method employing multi-reference frames is presented, and the effects of employing multi-reference frames on the analysis accuracy are investigated through solving numerical examples.

• 디지털콘텐츠학회 논문지
• /
• 제5권3호
• /
• pp.225-233
• /
• 2004

인터넷을 통한 사이버 교육은 교육 환경의 발전 및 변화의 주역으로 많은 사람들의 기대를 모으고 있다. 외국어 교육 영역에 있어 교육 효과를 보다 높이기 위해서는 멀티미디어 기법을 잘 활용한 강의 교재 제작은 필수 불가결한 사항이다. 본 논문에서 는 인터넷 기반 가상 교육 체계 하에서 이러한 외국어 학습에 있어 제문제점들을 효과적으로 해결하기 위해 실제상황을 연출하는 멀티미디어 교재를 제작하여 활용할 수 있는 가능성을 제시하면서, 그 효과에 대해서 설명하고자 한다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.48-59
• /
• 2018

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

• 한국해양공학회지
• /
• 제26권2호
• /
• pp.68-78
• /
• 2012

This study proposes an improved 3-D model that includes a new non-reflected wave generation system for oblique incident and multi-directional random waves, which enables us to estimate the effect of the various wave-types on 3-D wave fields in a coastal area with permeable submerged breakwaters. Then, using the numerical results,the three-dimensional wave field characteristics around permeable submerged breakwaters are examined in cases of oblique incident and multi-directional random waves. Especially, the wave height, mean surface elevation and mean flow around the submerged breakwaters are discussed in relation to the variation of incident wave condition.

• 조명전기설비학회논문지
• /
• 제24권10호
• /
• pp.85-89
• /
• 2010

During a ground fault the maximum fault current and neutral to ground voltage will appear at the pole nearest to the fault. Distribution lines are consisted of three phase conductors, an overhead ground wire and a multi-grounded neutral line. In this paper phase to neutral faults were staged at the specified concrete pole along the distribution line and measured the ground fault current distribution in the ground fault current, three poles nearest to the fault point, overhead ground wire and neutral line. A effect by grounding resistance of poles of ground fault current in the 22.9[kV] multi-ground distribution system. by field tests.

• 조명전기설비학회논문지
• /
• 제30권3호
• /
• pp.59-64
• /
• 2016

Applications of electrolytic ion water generated by the oxidation-reduction have gradually been expanded due to their strong sterilizing power and a surface active force. We demonstrate the effect of the multi-layer type electrode for effective ion water generation. The multi-layer type electrode has ability to generate stronger acid and alkali water by increase of the electrode reactive area. Also power consumption efficiency enhances because the electrodes disposed in middle position of the reactive cell raise the usage rate by overlapped effect as an electrolysis electrode.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.245-248
• /
• 2011

The scaling down of metal oxide semiconductor field-effect transistors (MOSFETs) for the last several years has contributed to the reduction of the scaling variables and device parameters as well as the operating voltage of the MOSFET. At the same time, the variation in the electrical characteristics of MOSFETs is one of the major issues that need to be solved. Especially because the issue with variation is magnified as the drive voltage is decreased. Therefore, this paper will focus on the variations between electrical characteristics and drain voltage. In order to do this, the test patterned multi-finger MOSFETs using 90-nm process is used to investigate the characteristic variations, such as the threshold voltage, DIBL, subthreshold swing, transconductance and mobility via parasitic resistance extraction method. These characteristics can be analyzed by varying the gate width and length, and the number of fingers. Through this modeling scheme, the characteristic variations of multi-finger MOSFETs can be analyzed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.109-114
• /
• 2007

Analytical method to analyze the effect of tolerance on the modal characteristic of multi-body systems in dynamic equilibrium position is suggested in this paper. Monte-Carlo Method is conventionally employed to perform the tolerance analysis. However, Monte-Carlo Method spends too much time for analysis and has a greater or less accuracy depending on sample condition. To resolve these problems, an analytical method is suggested in this paper. By employing the sensitivity information of mass, damping and stiffness matrices, the sensitivities of damped natural frequencies and the transfer function can be calculated at the dynamic equilibrium position. The effect of tolerance on the modal characteristic can be analyzed from tolerance analysis method.

• 한국경영과학회지
• /
• 제37권4호
• /
• pp.37-50
• /
• 2012

The existing DEA models have been devoted to evaluate relative efficiency of DMUs based on multiple input and output factors of a same period. However, a certain kind of lead time can be required to produce outputs using inputs in an organization. R&D evaluation is a typical area with this kinds of time lag. Thus, the purpose of this paper is to develop a new DEA model to deal with time lag effect in performance evaluation. The proposed model is to find relative efficiency of each DMU for each period considering the time lag effect. A case example using a real data set is also given to show the usage or implication of the suggested model. The results are compared with the ones of the CCR model and the multi-periods input model.