International Journal of Naval Architecture and Ocean Engineering

The Society of Naval Architects of Korea (대한조선학회)
권호 표지
DOI QR코드

DOI QR Code

A study on the thermal deformation characteristics of steel plates due to multi-line heating

  • Lee, Joo-Sung (School of Naval Architecture and Ocean Engineering, University of Ulsan) ;
  • Lee, Sang-Hoon (Korea Marine Equipment Research Institute, Ulsan Branch)
  • Received : 2016.09.29
  • Accepted : 2017.04.04
  • Published : 2018.01.31
Download PDF
⟨ Previous Next ⟩

Abstract

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

Keywords

References

  1. Ha, Y.S., 2001. A Study on the Prediction of Plate Deformation by Heating of Weaving Path in Thick Plate Bending. MSC Thesis. Seoul National University.
  2. Jang, C.D., Ko, D.E., Kim, B.I., Park, J.U., 2001. An experimental study of characteristics of plate deformation by heating process. J. Soc. Nav. Archit. Korea 38 (2), 62-70.
  3. Jang, C.D., Ha, Y.S., Ko, D.E., Moon, S.C., 2002. Determination of inherent strain regions to estimate plate deformation by line heating. J. Soc. Nav. Archit. Korea 39 (1), 82-89. https://doi.org/10.3744/SNAK.2002.39.1.082
  4. Lee, B.I., Yoo, H.S., Byun, G.G., Kim, H.G., 2002. A study on automation of steel plate forming by heating method. J. Soc. Nav. Archit. Korea 39 (2), 34-44. https://doi.org/10.3744/SNAK.2002.39.2.034
  5. Lee, J.S., 1996. Plate Forming automation system of steel plates by line heating method (II). J. Soc. Nav. Archit. Korea 33 (3), 81-93.
  6. Lee, J.S., 1997. Plate Forming automation system of steel plates by line heating method (III). J. Soc. Nav. Archit. Korea 34 (2), 85-89.
  7. Lee, J.S., 2004. Simulator for weld-induced deformation of panel blocks. J. Soc. Nav. Archit. Korea 41 (1), 55-63. https://doi.org/10.3744/SNAK.2004.41.1.055
  8. Lee, J.S., 2010. Development of knowledge-based method to automatically derive the deformation estimation formula due to line heating. J. Korean Weld. Join. Soc. 28 (1), 92-99.
  9. Lee, S.H., Lee, J.S., 2012. A study on the thermal deformation characteristics of multi-line heating. In: Proc. 26th Asian-Pacific Technical Exchange & Advisory Meeting on Marine Structures (TEAM 2012), Sept. 03-06, 2012. Kyushu University, Fukuoka, Japan, pp. 423-427.
  10. Lee, J.S., Song, Y.J., Lee, S.H., 2014. On the thermal deformation prediction of steel plates by multi-line heating. In: Proceedings of the 28th Asian-Pacific Technical Exchange & Advisory Meeting on Marine Structures (TEAM 2014), Oct. 13-16, 2014. Istanbul Technical University, Istanbul, Turkey, pp. 66-73.
  11. Masubuchi, K., 1980. Analysis of Welded Structures. Pergamon Press, Oxford.
  12. Nomoto, T., Ohmori, T., Enosawa, M., Aoyama, K., Saitoh, M., 1990. Development of simulator for plate bending by line heating. J. Soc. Nav. Archit. Jpn. 168, 527-535.
  13. Shin, J.G., 1992. A two-dimensional simulator for plate forming by line heating. J. Soc. Nav. Archit. Korea 29 (1), 191-200.
  14. Tsuji, I., Okumura, Y., 1988. A study on line heating process for plate bending of ship steels. J. West. Soc. Nav. Archit. 76, 149-160.

Cited by

  1. Effect of Coil Width on Deformed Shape and Processing Efficiency during Ship Hull Forming by Induction Heating vol.8, pp.9, 2018, https://doi.org/10.3390/app8091585
  2. Nondimensional prediction of thermal forming behaviour for the ship hull plate fabricated by induction heating vol.14, pp.5, 2018, https://doi.org/10.1080/17445302.2018.1514571