• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3080-3085
• /
• 2007

Shape optimization of the 3-dimensional WIG airfoil with 3.0-aspect ratio has been performed by using the multi-objective genetic algorithm. The WIG ship effectively floating above the surface by the ram effect and the virtual additional aspect ratio by a ground is one of next-generation and cost-effective transportations. Unlike the airplane flying out of the ground effect, a WIG ship has possibility to capsize because of unsatisfying the static stability. The WIG ship should satisfy aerodynamic properties as well as a static stability. They tend to strong contradict and it is difficult to satisfy aerodynamic properties and static stability simultaneously. It is inevitable that lift force has to scarify to obtain a static stability. Multi-objective optimization technique that the individual objectives are considered separately instead of weighting can overcome the conflict. Due to handling individual objectives, the optimum cannot be unique but a set of nondominated potential solutions: pareto optimum. There are three objectives; lift coefficient, lift-to-drag ratio and static stability. After a few evolutions, the non-dominated pareto individuals can be obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1254-1258
• /
• 2003

One of the major factors that effect sensor performance is analog noise that added in a sensor signal such as voltage. In multi-axis force sensors, error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body. The other error source is noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then proposes a method that can reduce the effect of noise signal to sensor performance. The method is to convert analog voltage signal to digital numbers near sensor body and then to read these digital signals and conduct signal processing in the computer. By this way, we can eliminate a bad effect of electromagnetic wave emitted from computer and of 60 Hz noise emitted from AC source. The proposed method is investigated through experimental demonstration. The experimental results show that it improves S/N ratio of the sensor about 40 times in our experimental setup.

• 한국정보통신학회논문지
• /
• 제17권1호
• /
• pp.248-254
• /
• 2013

신호원으로부터 발생하는 전파를 이격된 다중 센서에서 수신하여 신호원의 위치를 추정하는 시스템에서는 신호원의 위치와 센서들의 위치에 따라 위치탐지 정확도가 저하되는 현상이 나타난다. 이러한 현상을 기하학적 정밀도 저하(GDOP) 효과라 하며, 이러한 효과를 최소화하여 위치탐지 정확도 성능을 향상시키기 위한 방법에 대해 연구가 필요하다. 본 논문에서는 이격 배치된 센서들의 방위 정보를 이용하여 GDOP 효과의 발생 가능성을 추정하고, 위치 추정에서 오차 요인이 되는 센서를 제거하여 GDOP 효과로 인한 성능 저하를 최소화하는 방법에 관한 연구 결과를 서술하겠다.

• Applied Science and Convergence Technology
• /
• 제25권4호
• /
• pp.73-76
• /
• 2016

Multi-layer films of $SiN_x/SiO_x$/InSnO with anti-reflective effect were grown by new-concept plasma enhanced chemical vapor deposition system (PECVD) with hybrid plasma source (HPS). Anti-reflective effect of $SiN_x/SiO_x$/InSnO was investigated as a function of ratio of $SiN_x$ and $SiO_x$ thickness. Multi-layers deposited by PECVD with HPS represents the enhancement of anti-reflective effect with high transmittance, comparing to the layers by conventional radio frequency (RF) sputtering system. This change is strongly related to the optical and physical properties of each layer, such as refractive index, composition, film density, and surface roughness depending on the deposition system.

• 천문학회보
• /
• 제41권2호
• /
• pp.51.2-51.2
• /
• 2016

Hayabusa, the Japanese asteroid sample returning mission, acquired more than 1400 scientific images of its target asteroid (25143) Itokawa using the Asteroid Multi-band Imaging Camera (AMICA). It took images at a wide coverage of the phase angle a (Sun-Itokawa-Hayabusa) from $a{\sim}0^{\circ}$ to ${\sim}35^{\circ}$, providing a unique opportunity for studying the opposition effect (a sharp surge in brightness of asteroidal surface). Here we present a study of the opposition effect on Itokawa using the AMICA multi-band data. We found that (1) the opposition strength near the opposition is independent of the incident/emission angles of the light, also (2) it weakly depends on the wavelength showing the strongest surge around 0.7 um, and (3) the reflectance increases linearly at a>$1.5^{\circ}$ while nonlinearly at a<$1.5^{\circ}$ as approaching the opposition point. In particular, we noticed that the increasing rate has a correlation with the reflectance in the nonlinear domain whereas no detectable correlation with the reflectance in the linear domain. From these results, we conjecture that the coherent backscattering opposition effect is a dominant mechanism for the nonlinear opposition surge at a<$1.5^{\circ}$ while shadow hiding opposition effect is responsible for the linear opposition surge at a>$1.5^{\circ}$.

• 설비공학논문집
• /
• 제29권7호
• /
• pp.360-365
• /
• 2017

Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

• 전기학회논문지P
• /
• 제58권4호
• /
• pp.619-622
• /
• 2009

Multi Cultivation Remote-control System(MCRS) for crpos through characteristics of multi-safe sensors was realized. It was carried out to investigate into the effect of LED Control with the physiological activity of crops(for examples, sprouts). We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. The applied multi-safe sensors for measurement are blue, green, red, white, yellow leds and humidity sensors, web camera sensors under safe conditions for crops cultivation. And we producted the remote control OS using Linux and defined the characteristics of automatic control about sprouts.

• 한국통신학회논문지
• /
• 제24권6A호
• /
• pp.855-863
• /
• 1999

최근 들어 다양한 종류의 정보를 원하는 속도와 서비스품질(QOS)로 전송하고자 하는 Multi-Rate CDMA 시스템들에 대한 연구가 활발하다. 본 연구에서는 다양한 종류의 정보를 보내는데 있어서 쉽게 기존의 CDMA 시스템과 융화 될 수 있으며, 사용자가 요구하는 QOS와 전송 속도를 만족시킬 수 있는 Multi-Code CDMA 시스템에서 주요한 요소로 고려되고 있는 전력 증폭기의 비선형성을 고려하여 Multi-Code CDMA 시스템의 성능을 분석하였다. 분석에 사용한 비선형 증폭기의 모델링에는 다항식을 사용하였으며, 분석 결과 특히 주파수 선택적 페이딩의 경우 비선형에 의한 영향이 AWGN 채널에 비하여 훨씬 더 큼을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1136-1141
• /
• 2004

In recent years, demands on microelectrode have been greatly enhanced because of its potential applications and mass production of microelectrodes is needed. An electrochemical fabrication is used as an method for the simple and cheap fabrication of multi microelectrodes. In this paper, one dimensional microelectrode array is used for fabricating of multi electrodes. A diffusion layer which is formed near the electrode surface has an effect on the shape error of multi microelectrodes. The optimal distance between electrodes to minimize shape errors of multi electrodes is investigated. Multi microelectrodes which has several tens of and hundreds of micrometer in diameter are fabricated at a time.

• 한국생활과학회지
• /
• 제19권3호
• /
• pp.455-469
• /
• 2010

This study developed and evaluated a school adjustment program for children from multi-cultural families. The program was developed to enhance Korean language ability and adjustment to school for children from multi-cultural backgrounds. 14 preschool children (5 boys and 9 girls) participated in this program. The effect of this program was assessed through a preschool-children's receptive and expressive vocabulary test as well as through a reading ability test. Results showed there was a significant experimental effect (p<.05) in receptive and expressive vocabulary test scores. After the experiment, children showed higher scores in the receptive and expressive vocabulary test than before. Results of the program evaluation revealed this program was helpful for promoting Korean language ability in children and assisted their adjustment to school for children from multi-cultural backgrounds.