• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3080-3085
• /
• 2007

Shape optimization of the 3-dimensional WIG airfoil with 3.0-aspect ratio has been performed by using the multi-objective genetic algorithm. The WIG ship effectively floating above the surface by the ram effect and the virtual additional aspect ratio by a ground is one of next-generation and cost-effective transportations. Unlike the airplane flying out of the ground effect, a WIG ship has possibility to capsize because of unsatisfying the static stability. The WIG ship should satisfy aerodynamic properties as well as a static stability. They tend to strong contradict and it is difficult to satisfy aerodynamic properties and static stability simultaneously. It is inevitable that lift force has to scarify to obtain a static stability. Multi-objective optimization technique that the individual objectives are considered separately instead of weighting can overcome the conflict. Due to handling individual objectives, the optimum cannot be unique but a set of nondominated potential solutions: pareto optimum. There are three objectives; lift coefficient, lift-to-drag ratio and static stability. After a few evolutions, the non-dominated pareto individuals can be obtained. Pareto sets are all the set of possible and excellent solution across the design space. At any selections of the pareto set, these are no better solutions in all design space

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1254-1258
• /
• 2003

One of the major factors that effect sensor performance is analog noise that added in a sensor signal such as voltage. In multi-axis force sensors, error sources may be classified mainly in two groups. One is structural error due to inaccuracy of sensor body. The other error source is noise signals existing in the sensed information. This paper presents a brief review about the principle of multi-axis force sensors, and then proposes a method that can reduce the effect of noise signal to sensor performance. The method is to convert analog voltage signal to digital numbers near sensor body and then to read these digital signals and conduct signal processing in the computer. By this way, we can eliminate a bad effect of electromagnetic wave emitted from computer and of 60 Hz noise emitted from AC source. The proposed method is investigated through experimental demonstration. The experimental results show that it improves S/N ratio of the sensor about 40 times in our experimental setup.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.248-254
• /
• 2013

In location finding system using spaced multi-sensor, there is the phenomenon that the position estimation accuracy is degraded by the location of signal sources and the sensors. This phenomenon is called GDOP(Geometric Dilution Of Precision) effect. and to minimize these effects, research is needed on how. In this paper, I will describe how to minimize GDOP effect, estimating possibility of GDOP using AOA(angle of arrival) information of spaced multi sensors, and removing sensor error factor in position estimation.

• Applied Science and Convergence Technology
• /
• v.25 no.4
• /
• pp.73-76
• /
• 2016

Multi-layer films of $SiN_x/SiO_x$/InSnO with anti-reflective effect were grown by new-concept plasma enhanced chemical vapor deposition system (PECVD) with hybrid plasma source (HPS). Anti-reflective effect of $SiN_x/SiO_x$/InSnO was investigated as a function of ratio of $SiN_x$ and $SiO_x$ thickness. Multi-layers deposited by PECVD with HPS represents the enhancement of anti-reflective effect with high transmittance, comparing to the layers by conventional radio frequency (RF) sputtering system. This change is strongly related to the optical and physical properties of each layer, such as refractive index, composition, film density, and surface roughness depending on the deposition system.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.2
• /
• pp.51.2-51.2
• /
• 2016

Hayabusa, the Japanese asteroid sample returning mission, acquired more than 1400 scientific images of its target asteroid (25143) Itokawa using the Asteroid Multi-band Imaging Camera (AMICA). It took images at a wide coverage of the phase angle a (Sun-Itokawa-Hayabusa) from $a{\sim}0^{\circ}$ to ${\sim}35^{\circ}$, providing a unique opportunity for studying the opposition effect (a sharp surge in brightness of asteroidal surface). Here we present a study of the opposition effect on Itokawa using the AMICA multi-band data. We found that (1) the opposition strength near the opposition is independent of the incident/emission angles of the light, also (2) it weakly depends on the wavelength showing the strongest surge around 0.7 um, and (3) the reflectance increases linearly at a>$1.5^{\circ}$ while nonlinearly at a<$1.5^{\circ}$ as approaching the opposition point. In particular, we noticed that the increasing rate has a correlation with the reflectance in the nonlinear domain whereas no detectable correlation with the reflectance in the linear domain. From these results, we conjecture that the coherent backscattering opposition effect is a dominant mechanism for the nonlinear opposition surge at a<$1.5^{\circ}$ while shadow hiding opposition effect is responsible for the linear opposition surge at a>$1.5^{\circ}$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.7
• /
• pp.360-365
• /
• 2017

Recently, development efforts of triple-effect absorption chiller have been increased in order to improve the efficiency of double-effect absorption chiller. However, triple-effect absorption chiller has some disadvantages, including high corrosion characteristic of LiBr solution at high temperature of $200^{\circ}C$. Moreover, it is necessary to develop new components for operation under high pressure of 2 bars even though COP is increased to 1.6 or 1.7. The objective of this study was to introduce a new system by combining double effect absorption chiller with single effect absorption chiller with multi-generators using bypass flow of LiBr dilute solution to $3^{rd}$ generator to overcome the disadvantages of triple-effect chiller and improve energy efficiency. Results indicate that the new absorption cycle had a much higher efficiency than double-effect chiller system, showing significant improvement when bypass solution flow rate of 25% was applied to the $3^{rd}$ generator using the main dilute solution of the absorber. The COP of the new chiller system was found to be 1.438, which was 21.7% higher than that (1.18) of the present double-effect system. The COP was decreased when solution by-pass rate to the $3^{rd}$ generator was increased. In addition, lower cooling water temperature caused higher COP. Therefore, the multi-generator system with by-pass solution might be an excellent chiller alternative to triple-effect absorption chiller with higher efficiency.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.619-622
• /
• 2009

Multi Cultivation Remote-control System(MCRS) for crpos through characteristics of multi-safe sensors was realized. It was carried out to investigate into the effect of LED Control with the physiological activity of crops(for examples, sprouts). We have also composed a Combined Automatic Control System possible for the control of temperature and humidity at the same time. The applied multi-safe sensors for measurement are blue, green, red, white, yellow leds and humidity sensors, web camera sensors under safe conditions for crops cultivation. And we producted the remote control OS using Linux and defined the characteristics of automatic control about sprouts.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.855-863
• /
• 1999

Recently a number of multi-rate CDMA systems have been proposed for the third generation mobile communication system. Multi-Code CDMA (MC-CDMA) offers the system construction advantage of being able to use a single-rate receiver. But MC-CDMA suffers from the distortion due to the nonlinearity of the power amplifier. In this paper, we analyze the effect of the nonlinearity on the bit error rate performance of MC-CDMA systems. A polynomial model is used to represent the amplifier amplitude nonlinearities.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.1136-1141
• /
• 2004

In recent years, demands on microelectrode have been greatly enhanced because of its potential applications and mass production of microelectrodes is needed. An electrochemical fabrication is used as an method for the simple and cheap fabrication of multi microelectrodes. In this paper, one dimensional microelectrode array is used for fabricating of multi electrodes. A diffusion layer which is formed near the electrode surface has an effect on the shape error of multi microelectrodes. The optimal distance between electrodes to minimize shape errors of multi electrodes is investigated. Multi microelectrodes which has several tens of and hundreds of micrometer in diameter are fabricated at a time.

• Korean Journal of Human Ecology
• /
• v.19 no.3
• /
• pp.455-469
• /
• 2010

This study developed and evaluated a school adjustment program for children from multi-cultural families. The program was developed to enhance Korean language ability and adjustment to school for children from multi-cultural backgrounds. 14 preschool children (5 boys and 9 girls) participated in this program. The effect of this program was assessed through a preschool-children's receptive and expressive vocabulary test as well as through a reading ability test. Results showed there was a significant experimental effect (p<.05) in receptive and expressive vocabulary test scores. After the experiment, children showed higher scores in the receptive and expressive vocabulary test than before. Results of the program evaluation revealed this program was helpful for promoting Korean language ability in children and assisted their adjustment to school for children from multi-cultural backgrounds.