• ETRI Journal
• /
• v.43 no.3
• /
• pp.400-413
• /
• 2021

This paper theoretically and empirically explores the reliability gain that can be obtained by installing multiple antennas in on-vehicle broadcasting receivers. Analytical derivations reveal that maximal-ratio-combining-based diversity allows a multi-antenna receiver (MR) to achieve significantly better coverage probability than a single-antenna receiver (SR). In particular, the notable MR gains for low-power reception and high-throughput services are highlighted. We also discuss various aspects of mobile MRs, including geometric coverage, volume of the users served, and impact of receiver velocity. To examine the feasibility of MRs in the real world, extensive field experiments were conducted, particularly with on-air ATSC 3.0 broadcast transmissions. Relying on the celebrated erroneous second ratio criterion, MRs with two and four antennas were verified to achieve notable reliability gains over SRs in practice. Furthermore, our results also prove that layered-division multiplexing can cope better with receiver mobility than traditional time-division multiplexing when multiple services are intended in the same radio frequency channel.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.10
• /
• pp.79-85
• /
• 2009

The design of a 3.2 Gb/s serial link receiver in $0.18{\mu}m$ CMOS process is presented. The major factors limiting the performance of high-speed links are transmission channel bandwidth, timing uncertainty. The design uses a multi-level signaling(4-PAM) to overcome these problems. Moreover, to increase data bit-rate and lower BER, we designed this circuit by using a current mode amplifier, Current-mode Logic(CML) sampling latches. The 4-PAM receiver achieves 3.2 Gb/s and BER is less than $1.0\;{\times}\;10^{-12}$. The $0.5\;{\times}\;0.6\;mm^2$ chip consumes 49 mA at 3.2 Gb/s from a 1.8-V supply.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.43-46
• /
• 1998

The performance of a receiver that empolys a multi-stage inter-ference cancellation scheme for uplink fading channel is analyzed when there is carrier frequency offset. And the conditions to permit the performance improvement are analytically obtained. Numerical results show the effectiveness of the proposed system under Rayleigh fading channel assuming that carrier frequency offset is present.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.66-75
• /
• 2007

In this paper, we have propose a preamble structure and synchronization/channel estimation method for UWB-MIMO which has 960Mbps transmit rate. The proposed structure is a compatible preamble structure for synchronization/channel estimation used by MIMO in MB-OFDM(Multi-Band OFDM) systems that are one of the standard systems of MBOA. The system is compatible with MB-OFDM using the proposed preamble structure. In this paper, we argue the problem in receiver part used by MIMO technique. And we simulate the proposed preamble for using synchronization/channel estimation. The simulation result shows the same performance compared with single receiver antenna.

• Journal of Digital Contents Society
• /
• v.5 no.4
• /
• pp.264-268
• /
• 2004

MIMO(Multi-Input Multi-Output)) system, which can increase the channel capacity by in multiple transmit and/or receive antennas, has been intensively studied for higher data rates and better quality in wireless communications. This paper treats the MIMO channel modeling and analyze the performance of V-BLAST system with ZF receiver and MMSE reciver, using OSUS algorithm respectively, over MIMO channel.

• Proceedings of the IEEK Conference
• /
• 2002.06a
• /
• pp.77-80
• /
• 2002

In this paper, we analyze a physical layer of W-CDMA .system and design a transmitter and receiver by using ADS (Advanced Design System). Also, we simulated a link level performance with different channel estimation algorithm in Jakes fading channel environment. For the channel estimator, we used the WMSA(Weighted Multi-Slot Averaging) algorithm, EGE(Equal Gain Estimation) algorithm and SSE(Symbol-to-Symbol Estimation) algorithm. This study will be useful in the analysis and design of W-CDMA system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.1995-2003
• /
• 1999

Since the cross-correlation function which is due to communication channel distortion or interference is not orthogonal, near far problem and multi-user interference are generated in the DS-CDMA system. Those problems degrade performance of the system so that the efficient algorithm to suppress the interference in the DS-CDMA system is required. In this paper, a blind adaptive interference suppressor using constant modulus algorithm is proposed. Simulation results present that the gain of SIR for the blind adaptive receiver is about 7[dB] at steady state over Gaussian channel in forward channel. The gain of noise to interference ration is about 4[dB] over Rayleigh fading channel, is about 11[dB] over multipath channels. Thus the proposed receiver has higher performance than a conventional receiver in the DS-CDMA system.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.3
• /
• pp.277-284
• /
• 2012

In this study, a heat-transfer performance analysis is carried out for a multi-channel volumetric air receiver for a solar power tower. On the basis of a series of reviews regarding the relevant literature, a calculation process is proposed for the prediction of the wall- and air- temperature distributions of a single channel at given geometric and input conditions. Furthermore, a unique mathematical model of the receiver effectiveness is presented through analysis of the temperature profile. The receiver is made of silicon carbide. A total of 225 square straight channels per module are molded to induce the air flow, and each channel has the dimensions of $2mm(W){\times}2mm(H){\times}0.2mm(t){\times}320mm(L)$. The heat-transfer rate, temperature distribution and effectiveness are presented according to the variation of the channel and module number under uniform irradiation and mass flow rate. The available air outlet temperature applied to the solar power tower should be over $700^{\circ}C$. This numerical model was actually used in the design of a 200 kW-level commercial solar air receiver, and the required number of modules satisfying the thermal performance could be obtained for the specified geometric and input conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.6A
• /
• pp.920-930
• /
• 1999

Many researches on the multi-level QAM(Quadrature Amplitude Modulation) which is known to be a promising digital data transmission method for efficient use of channel bandwidth have been carried on, and their applications to various real fields are now being in progress. However, in the band-limited communication systems, each transmitted symbols is distorted by the ISI(Intersymbol Interference) and the phase error. Therefore, an equalizer and a carrier recovery must be taken into considerations to attenuate the effects of these distortions in the receiver. This paper presents an effective receiver structures that is applicable to the multi-level QAM. The proposed receiver system is consisted of an equalizer with Godard’s blind algorithm and a carrier recovery circuit. The phase error is estimated with a $\theta$-matching algorithm and is used in the carrier recovery to recover the correct phase. The simulation results are included to evaluate performance of the proposed receiver system for the various channel models.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1167-1176
• /
• 1995

This paper suggests a method for optimal power assignment of the satellite transponder input carriers in the Multi-level & Multi-bandwidth system. The interference and the noise effects analyzed for the optimal power assignment are intermodulation product caused by the nonlinear transponder characteristics, adjacent channel interference, co-channel interference, and thermal noise in the satellite link. The Fletcher- Powell algorithm is used to determine the optimal input carrier power. The performance criteria for optimal power assignment is classified into 4 categories according to the CNR of destination receiver earth station to meet the requirement for various satellite link environment. We have performed mathematical analysis of objective functions and their derivatives for use in the Fletcher-Powell algorithm, and presented various simulation results based on mathematical analysis. Since the satellite link, it is meaningful to model and analyze these effects in a unified manner and present the method for optimal power assignment of transponder input carriers.