• Aerospace Engineering and Technology
• /
• v.4 no.1
• /
• pp.162-170
• /
• 2005

In KSLV-I, actuation system for thrust vector control of kick motor was configured as electro-hydraulic servo actuation system and consisted of actuators, hydraulic power supply system, hydraulic power distribution system and control system. In case of hydraulic power supply system, we use EMDP(Electric Motor Driven Pump) to supply hydraulic power. Generally, we use brushed DC motor for EMDP but it is not easy to operate EMDP using brushed DC motor at a high altitude. Hence, we are developing EMDP using brushless DC motor to use at a high altitude. In this study, we will explain control system for BLDC motor to drive hydraulic pump.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.612-615
• /
• 2013

Hub BLDC(Brushless Direct Current) motor, called wheel-in motor is a outer rotor type high efficient direct driving motor which have a multi-pole permanent magnet type rotor as a driving wheel. This study shows a hub BLDC motor speed controller design methode using PIC micro controller to drive 2 wheels or 3 wheels driving body having hub motor driving shaft. The motor driver unit consists of six discrete MOSFET switching devices and the gate driving module is directly designed for high economy.

• Proceedings of the KIEE Conference
• /
• 2003.10b
• /
• pp.27-29
• /
• 2003

최근 자동차시스템의 고품위화에 대한 요구가 지속적으로 증대되어 자동차의 전기시스템화가 급속히 진행되고 있다. 향후 하이브리드 전기자동차 및 연료전지자동차 그리고 차세대 파워트레인의 구동모터에 이르기까지 전기구동모터의 영역은 지속적으로 확대되고 있으며 이러한 움직임은 자동차 전기시스템의 구조자체에 대한 변화를 요구하고 있다. 따라서 본 논문에서는 최근 자동차분야에서의 모터구동시스템의 주요연구 분야에 대해 기술하며 기술발전에 있어서의 문제점 및 극복해야 할 과제에 대해서 논의한다. 차량관점에서의 개선목표를 제시하며 이를 달성하기 위한 핵심기술 및 세부요소기술에 대한 동향을 함께 제시한다. 이를 통하여 모터구동시스템 자체만의 독립적인 기술이 아닌 차량을 고려한 모터 구동시스템의 기술발전에 대한 필요성에 대해 강조한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.4
• /
• pp.1777-1783
• /
• 2012

In this paper, a new motor driving circuit is designed to improve the output performance of DC motor, and a controller is developed with the designed circuit. By the designed driving circuit, a controller can continuously drive DC motors by a transformer which has switching signals of a self-generated circuit to operate it. And while the DC motor have a maximum velocity, the reference voltage can be maintained higher value than that of triangle voltage and it makes the DC motor driving transistor ON and maximum power. A 24V-500W DC motor controller is developed with the proposed motor driving circuit, and also a small electric car is made and the driving test of it is executed. The test results shows that it can continuously control go and back speed of motor with 12A driving current. And also, it is verified that the over current and heat detecting function is operating correctly and the rest value of the used battery can be displayed as 6 step from 20 to 100%.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.139-144
• /
• 2023

In order to obtain the maximum characteristics of motors such as torque and efficiency, all motors basically use universal inverters designed for each motor's characteristics. However, if you look at the recent research results, you can see cases of SRM(Switched Reluctance Motor) driving studies using 6-switch inverters, which are BLDC(Brushless DC Motor) universal inverters, and research cases of driving 3-phase BLDC motors using 4-switch inverters. Therefore, it is possible to search for research methods by approaching various methods of driving and control that can drive each motor apart from the existing universal inverter. In line with this research trend, in this paper, a C-dump type converter, which is an SRM drive converter, was applied as a drive driver for a BLDC motor, and its characteristics and possibilities were studied.

• The Journal of the Acoustical Society of Korea
• /
• v.15 no.1
• /
• pp.10-16
• /
• 1996

Ultrasonic motor is a motor driven by the stator via frictional contact forces generated from ultrasonic vibration of piezoelectric elements. In order to control the ultrasonic motor, it is essential to measure accurately the motor characteristics with respect to driving parameters such as frequency, voltage, phase difference and duty ratio of the driving signals. In this paper, a PC-interfaced evaluation device is developed, and the characteristic curves of the fabricated ultrasonic motor are measured with those parameters. All driving parameters are processed digitally. The developed evaluation device can facilitate charateristics measurements effectively, and provide a base for digital control of the ultrasonic motor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.5
• /
• pp.54-59
• /
• 2005

Brushless DC motor is a motor which is modified form DC brush motor and it does not have brushes. BLDCM is easy to centre, has wide speed range, high efficiency. However it needs speed sensor like encoder which increases the motor price and cause some faults in poor surroundings.. In this paper, for the sensorless control, the driving techniques for the initial stable start and the steady state are studied For the steady state the rotor position is determined using the measured back-EMF. To enhance the initial stating performance, the current signal from the free-wheeling diode is used. The results are conformed through the experiments.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.40 no.1
• /
• pp.45-54
• /
• 2003

Turbo compressor needs high speed rotation of impeller in structure, high rated gearbox and conventional induction motor. This mechanical system increased the moment of inertia and mechanical friction loss. Resently, the study of turbo compressor applied super high speed motor and drive, removing gearbox made its sire small and mechanical friction loss minimum. This paper describes the implementation of the vector control schemes for a variable-speed 131㎾ PMSM(Permanent Magnet Synchronous Motor) drive in super-high speed application.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.362-363
• /
• 2013

기존 Fan Motor용 인버터의 경우, 높은 전압으로 인버터를 구동하기 때문에 높은 내압의 IPM을 사용해야 하는 문제점이 있다. 본 논문은 Fan Motor 구동용 인버터의 내압을 줄일 수 있는 Dual 공진 강압형 DC/DC 컨버터를 제안한다. 기존의 강압형 DC/DC 컨버터를 사용할 경우에는 큰 인덕터를 사용하기 때문에 회로의 전체적인 부피가 커지고 제작단가가 증가하는 단점이 있다. 반면 제안된 회로는 작은 크기의 인덕터를 사용한 Dual 공진 강압형 DC/DC 컨버터로써, 낮은 출력전압으로 인버터 구동이 가능하고, 영전압 스위칭을 하기 때문에 소형화 및 고효율화가 가능한 장점을 갖는다. 본 논문에서는 제안된 회로의 이론적인 특성을 분석하고 모의실험을 통해 확인하였으며, 1.8kW급 Fan Motor 구동용 인버터 회로에 적용하여 실험을 통해 우수성을 검증하였다.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.5
• /
• pp.865-872
• /
• 2019

In this paper, we describe the Solar Car, Woongbi, which was created to participate in the World Solar Challenge(WSC) at the team NeulHaeRang of Korea National University of Transportation. The WSC is the world's largest solar car racing competition and has a separate automobile regulation and must be manufactured to meet the regulations. Therefore, the key point of the solar car design is to optimize the energy efficiency based on the regulations. The solar car's drive system consists of a solar array to convert solar energy into electric energy, a maximum power point tracker (MPPT) controller to track the converted electric energy to maximum output power, a battery to store the produced electric energy, a BLDC (Brushless DC) motor for driving the vehicle by converting energy into mechanical energy, and a motor controller for controlling the BLDC. The optimal design methods for solar energy conversion and electric driving system of battery, motor are presented in this paper.