• Journal of the Korean Society for Marine Environment & Energy
• /
• v.12 no.3
• /
• pp.111-123
• /
• 2009

The purpose of this study is to investigate the time-elapse change of oil-polluted Taean coastal area with by Herbei Spirit oil spill incident. From Mandae of Iwonmeyon to Padori beach of Sowonmeyon, field monitering was conducted at eleven surveying points surveying. The specific conclusions from this study are as follows. The residual oil was not founded at ten surveying points, but the crude oil remained under the ground at the Groompo beach one year passed since the oil spill. Because the efforts of volunteers over millionaires and inhabitants for cleaning and reciprocating actions of waves, the oil-polluted coastal area by Herbei Spirit oil spill incident. It is guessed that a part of stranded oil spilled from the incident was degraded by physical, chemical, and biological weathering and the residue was dispersed in tidal and subtidal zone with oil-minerals aggregates(OMA).

• Health Policy and Management
• /
• v.21 no.2
• /
• pp.279-308
• /
• 2011

Background : Demands have increased for a variety of welfare services and customized services for persons with disabilities(PWD). A management System focused on PWD was needed to provide for comprehensive services. The purpose of this study was to design a disability database and an application system in order to provide continuous and comprehensive rehabilitation service for PWD. Methods : We analyzed local and abroad disability-related policies and systems and derived the contents that should be included in the integrated database for PWD through a survey among rehabilitation specialists. Result : The integrated database for PWD was composed of 7 categories including General Characteristics, Health & Medicine, Assistance, Education, Employment, Economics and Daily & Social Life. The applicable system of integrated database for PWD was proposed to help conducting policies in such areas as follows ; 'welfare', 'education and culture', 'economic activity', 'social participation' and 'Health'. Conclusion : The main goal of disability policy and strategy should be established by systematically analyzing disability-related data integrating database of PWD. Accordingly, specific objectives and directions for disability policies should be set and efficiently managed and operated. The integrated database for PWD may be utilized for disability-related policies and service monitering, sustainable and integrated management and community participation and integration based on the rights of the disabled.

• Journal of Educational Research in Mathematics
• /
• v.27 no.2
• /
• pp.313-328
• /
• 2017

This study aims to identify prospective elementary school teachers' perception of mathematical modeling in elementary class. Forty elementary school teachers participated in this study. Each teacher analysed the previous case studies about mathematical modeling in elementary class, developed a hypothetical learning trajectory, applied the hypothetical learning trajectory to his/her class, reflected students' learning and his/her teaching, and made reflective journals. These journals contained teachers' perception of mathematical modeling and the difficulties that teachers experienced in teaching mathematics as mathematical modeling. These journals were analyzed to identify teachers' perception of mathematical modeling in elementary class. This study shows that teachers have common features of mathematical modeling but their perspectives are little bit different, are classified into four kinds. And the difficulties that teachers experienced in teaching mathematics as mathematical modeling are classified into 5 categories; Task, Students' cognitive demand, Teacher' monitering, All students' participation, and Classroom culture. At last, suggestions for mathematical modeling in elementary class are done according to the result of this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.133-140
• /
• 2010

The purpose of this study is to evaluate the new eco water tank which is made of high density polyethylene and concrete with low temperature cement. The strength and failure mode of eco water tank was examined through tensile test with mixture of concrete and HDPE, temperature monitoring for various kind of concrete, admixture contains etc. The strength and failure mode were examined through tensile test with mixture of concrete and HDPE, temperature monitering for different kinds of concrete, strength test with different admixtures etc. It was found that shear connector between concrete and HDPE effects significantly contributed to the combined structures. ㄱ type shear connector results in tensile strength of up to 40% compared to that of V type shear connector. Based on test result, the new eco composite tank improved the stability and safety the old one and demonstrated the applicability and capability.

• Journal of Korean Society for Geospatial Information Science
• /
• v.15 no.3
• /
• pp.51-57
• /
• 2007

In this study, We analyzed change of sea surface temperature due to cooling water around nuclear power station. Study area is around of Uljin nuclear power station, which is relatively large power station. There are many problems in monitering environmental change around of nuclear power station, because area is relatively large. We used Landsat 5, 7 Imagery which are useful in temperature analysis and can be easily obtained. After we georeferenced Landsat Imagery, radiance and sea surface temperature were calculated. As a result, As we compared sea surface temperature of surrounding area of nuclear power station with same area located 3 km east, there are $2.049^{\circ}C$ temperature difference.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.607-608
• /
• 2016

Recently using a variety of sensors sensing the virtual(Virtual Sensing) technology that extracts specific data has been applied to IoT service interface. The utilization of such sensors while increasing IoT (Internet of Things) environmental sensor is an essential element. However, used in the IoT to the environment, while the increase in utilization of a specific sensor utilization falling sensors is generated. In this paper, we design unnecessary sensors removal algorithm as a way to solve this problem. Through the utilization of poor power to block the sensor can reduce the power consumption and user sensor control service through the monitoring by blocking the use of the sensor is considered that there can be provided a more effective and convenient.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.896-897
• /
• 2013

In recent years, logistics tracking Device using GSM & WCDMA to improve logistics efficiency are being extensively researched. The purpose of this paper is to examine the performance development antenna usable cargo container security transport. Antenna developed by study were optimized to match logistics environment apply to GSM & WCDMA dual frequency for monitering system. The measure of antenna have confirmation VSWR is 3:1 measured in return loss -10dB. Reliability of this antenna has been verified about GSM & WCDMA through test-operation between the south korea and Russia.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.287-294
• /
• 2008

This study proposes a novel method for in service evaluation of tension force of a prestressed 7-wire strand which is frequently employed for retrofitting bridge superstructure. The smart strand is made by replacing the straight king wire of the strand with an instrumented steel tube in which the FBG sensor is embedded. Since the strain of the smart strand can easily be measured using the sensor, it is possible to monitor tension force of the strand during the service. For the sake of demonstrating effectiveness of the proposed strand, we came up with a 7.0m long prototype with 2 FBG sensors, and it is applied as an external tendon to a 6.4m long and 0.6 high RC T-shaped beam. A loading-unloading test has been carried out, and estimated tension forces using the smart strand are compared with measured forces by load cell. The comparison showed that the proposed smart tendon is useful and accurate for monitering tension force of the prestressed tendon.

• Journal of the Korean Chemical Society
• /
• v.37 no.6
• /
• pp.604-611
• /
• 1993

Supercritical Fluid Chromatography(SFC) has become a technique for solving problems that are difficult by other chromatographic methods. However, the most widely used fluid, is no more polar than hexane. Polar samples which are difficult to be analyzed with pure supercritical C$O_2$ because of their high polarity can be separated by adding polar modifiers to supercritical C$O_2$. In this paper, a new method for monitering the mobile phase composition in modified supercritical fluid chromatography was developed. The amount of water dissolved in supercritical C$O_2$ was measured by amperometric microsensor which is made of thin film of perfluorosulfonate ionomer (PFSI). The amount of water dissolved in supercritical C$O_2$ stayed constant for a much longer time than with a saturator column. With this new mixing device, we could do good separations for insecticides and fungicides which are difficult to separate with pure C$O_2$.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.823-826
• /
• 2007

In the construction project, the efforts to use IT for efficient management and improvement of productivity is gradually increasing. For instance, the cite management model with 3D CAD and RFID shows one of efforts this model define and systematize a variety of data occurred each work unit(design, material and process management information, etc). However, so far, there has been the problem monitoring the site due to the an inaccurate data and low-practice which people should input in manual. In this paper, we would like to establish the data for real time monitoring system with data inputting automatically from RTPM system and the site, and analyze the relationship between tables consist of similar data through RED Diagram.