• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.108-114
• /
• 2008

Uniaxial tension and compression test were conducted on conventional and crosslinked ultra-high molecular polyethylene (UHMWPE) all prepared from the same lot of medical grade GUR 1050. The conventional materials were unirradiated and gamma irradiated with $25kGy{\sim}200kGy$. Gamma irradiated processing was found to significantly impact the crystallinity, and hence the mechanical behavior, of the highly crosslinked UHMWPE. The crystallinity and radiation dose were key predictors of the uniaxial yielding, hardness, plastic flow, and failure properties of conventional and highly crosslinked UHMWPE. The correlation model from experiments would be the basic information to design the liner of artificial joint.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.81-88
• /
• 2015

The molecular weight (MW) and crystallinity of cotton linter need to be controlled to be dissolved well in N-methylmorpholine N-oxide (NMMO) solvent for manufacturing regenerated fibers of clothing fabrics. Electron beam irradiation or sulfuric acid pre-treatment followed by alkaline peroxide bleaching has been used to control MW effectively and to improve brightness of cotton linter. Auto-hydrolysis of cotton linter without electron beam irradiation or chemical pre-treatment was found to be effective as an alternative pre-treatment method. Removal of metal ions, that hampered dissolution of cotton linter by NMMO, was also investigated when the auto-hydrolysis was accompanied with ionic polymers and chelating agent.

• 식물분류학회지
• /
• 제49권4호
• /
• pp.282-293
• /
• 2019

Broussonetia × kazinoki Siebold has long been utilized as a major component in the manufacturing of Korean traditional paper, hanji, and has been suggested as a hybrid species of B. papyrifera and B. monoica. By applying three molecular markers, chloroplast (cp) ndhF-rpl32 IGS, a nuclear ribosomal internal transcribed spacer, and the TOPO6 gene, the hybrid origin of B. × kazinoki is tested. As a result, B. × kazinoki in Korea is demonstrated to be a hybrid of B. monoica × B. papyrifera, most likely formed naturally in Korea. The cp haplotypes detected provided information about the origins and genetic diversity of the maternal lineage B. monoica and paternal lineage B. papyrifera. The two nuclear markers were supplemented to each other, leading to the discovery of introgression in Broussonetia.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.97.1-100
• /
• 1998

We studied on the ultra thin L- $\alpha$ -DLPC by LB method. The $\pi$ -A isotherm of the L- e -DLPC was measured at the air-water interface varying with the compressing speed and amounts of solutions for spreading. The molecular arrangement of deposited films were evaluated by measuring the absorption with the UV spectrometer. And we made structures of metal(Au)/L- $\alpha$ -DLPC/Metal(Au) and examined electron through L- $\alpha$ -DLPC LB films by means of current-voltage(I- V) measurement

• 한국진공학회지
• /
• 제6권3호
• /
• pp.213-219
• /
• 1997

본 연구에서는 내전극 정전결합 유동가스형 반응장치를 이용하여 플라즈마 중합 스 티렌 박막을 제작하고 적외선분광스펙트럼, 열분해가tm크로마토그래피, 시차주사열량계 및 겔투과성 크로마토그래피의 분석을 통하여 중합조건이 분자구조 및 분자량 분포에 미치는 영향을 조사하였다. 위의 결과로부터 개시 모노머의 화학적 특성과는 다른 고도로 가교된 박막이 생성되었으며, 방전압력, 방전전력 및 가스의 유량 등의 중합조건 조절에 의해 분자 구조, 가교도, 분자량 분포 등의 제어가 가능함이 판명되었다. 따라서 내전극 정전결합 유동 가스형 반응장치에 의해 수행된 플라즈마중합법은 중합조건의 조절에 의해 센서의 감지막, 광도전성 소자 및 포토 레지스트 등에 응용가능한 기능성 유기박막의 제작에 좋은 특성을 나타내는 것을 알 수 있었다.

• 한국연초학회지
• /
• 제33권1호
• /
• pp.8-15
• /
• 2011

Genus Nicotiana has 76 species including N. tabacum. These plants are used not only as a material for cigarette manufacturing but also as ornamental plant, medicinal plant, poisonous substance plant, and bug repellent plant. N. tabacum is used as a main material for cigarette manufacturing with N. rustica. N. sylvestris and N. alata is used as ornamental plants because of their beautiful flowers and N. rustica is used for bug repellent or pesticide because of its high concentration of nicotine. N. glauca, a tree tobacco, is used for bio-fuel production. N. tabacum is used as a popular model plant system for degeneration, regeneration, and transformation. N. benthamiana is also used as a model system for foreign gene expression by agroinfiltration. The transformation ability of tobacco plant is a good target for molecular farming. Hepatitis B virus envelop protein, E. coli heat-labile enterotoxin, diabetes autoantigen, and cholera toxin B subunit were produced using tobacco plants. Secondary metabolites of tobacco include nicotine, anabasine, nornicotine, anatabine, cembranoid, solanesol, linoleic acid, rutin, lignin and sistosterol, and they are used for various medicine productions which cannot be produced by organic synthesis for their complicated structures. In conclusion, we have to understand the applicability of tobacco plant in detail and study to enlarge the usage of the plants.

• Tribology and Lubricants
• /
• 제35권5호
• /
• pp.286-293
• /
• 2019

In friction and wear tests that use friction force microscopy (FFM), the wear debris transfer to the tip apex that changes tip radius is a crucial issue that influences the friction and wear performances of films and coatings with nanoscale thicknesses. In this study, FFM tests are performed for bilayer $MoS_2$ film to obtain a better understanding of how geometrical and chemical changes of tip apex influence the friction and wear properties of nanoscale molecular layers. The critical load can be estimated from the test results based on the clear distinction of the failure area. Scanning electron microscopy and energy-dispersive spectroscopy are employed to measure and observe the geometrical and chemical changes of the tip apex. Under normal loads lower than 1000 nN, the reuse of tips enhances the friction and wear performance at the tip-sample interface as the contact pair changes with the increase of tip radius. Therefore, the reduction of contact pressure due to the increase of tip radius by the transfer of $MoS_2$ or Mo-dominant wear debris and the change of contact pairs from diamond/$MoS_2$ to partial $MoS_2$ or Mo/$MoS_2$ can explain the critical load increase that results from tip reuse. We suggest that the wear debris transfer to the tip apex should be considered when used tips are repeatedly employed to identify the tribological properties of ultra-thin films using FFM.

• Toxicological Research
• /
• 제31권3호
• /
• pp.313-319
• /
• 2015

3-Monochloro-1,2-propanediol (3-MCPD) and 1,3-dichloro-2-propanol (1,3-DCP) are not only produced in the manufacturing process of foodstuffs such as hydrolyzed vegetable proteins and soy sauce but are also formed by heat processing in the presence of fat and low water activity. 3-MCPD exists both in free and ester forms, and the ester form has been also detected in various foods. Free 3-MCPD and 1,3-DCP are classified as Group 2B by the International Agency for Research on Cancer. Although there is no data confirming the toxicity of either compound in humans, their toxicity was evidenced in animal experimentation or in vitro. Although few studies have been conducted, free 3-MCPD has been shown to have neurotoxicity, reproductive toxicity, and carcinogenicity. In contrast, 1,3-DCP only has mutagenic activity. The purpose of this study was to analyze 3-MCPD and 1,3-DCP in various foods using gas chromatography-mass spectrometry. 3-MCPD and 1,3-DCP were analyzed using phenyl boronic acid derivatization and the liquid-liquid extraction method, respectively. The analytical method for 3-MCPD and 1,3-DCP was validated in terms of linearity, limit of detection (LOD), limit of quantitation, accuracy and precision. Consequently, the LODs of 3-MCPD and 1,3-DCP in various matrices were identified to be in the ranges of 4.18~10.56 ng/g and 1.06~3.15 ng/g, respectively.

• Applied Biological Chemistry
• /
• 제51권2호
• /
• pp.114-118
• /
• 2008

Ginseng treated with several treatment conditions of various acids to search hydrolysates on the basis of increased biological activity and modified structure. In the result of acid treatment, the conversion rate of ginsenoside Rg3, Rk1 and Rg5 was highest when ginseng treated with citric acid. After added citric acid to ginseng extract, boiled at l00$^{\circ}C$ for 1 hour and add enzyme, which is examined change by time. It compared with group which did not treated acid. Two groups became difference according to enzyme but the generation rate of ginsenoside Rg3, Rk1 and Rg5 did not show difference greatly. Also, the generation rate of ginsenoside Rg3, Rk1 and Rg5 by time passes did not show difference. The generation rate of ginsenoside Rg3, Rk1 and Rg5 increased when increased acid concentration, temperature and time. We did exclusion molding to shorten treatment time. In the result of ginseng treated with citric acid of various concentrations at various temperatures as time passes by extrusion molding, the generation rate of ginsenoside Rg3, Rk1 and Rg5 was highest when ginseng treated with 3% citric acid at l60$^{\circ}C$ for 20 minutes. In addition, total saponin amount of ginseng treated with 3% citric acid at 160$^{\circ}C$ for 20 minutes was about 11% higher than ginseng heated at 120$^{\circ}C$ for 3 hours. These results indicated that our exclusion molding process more effective, compared to traditional red ginseng manufacturing process.

• Journal of Microbiology and Biotechnology
• /
• 제20권11호
• /
• pp.1539-1545
• /
• 2010

In beer, glutathione works as the main antioxidant compound, which also correlates with the stability of the beer flavor. In addition, high residual sugars in beer contribute to major nonvolatile components, which are reflected in a high caloric content. Therefore, in this study, the Saccharomyces cerevisiae GSH1 gene encoding glutamylcysteine synthetase and the Saccharomycopsis fibuligera ALP1 gene encoding ${\alpha}$-amylase were coexpressed in industrial brewing yeast strain Y31 targeting the ${\alpha}$-acetolactate synthase (AHAS) gene (ILV2) and alcohol dehydrogenase gene (ADH2), resulting in the new recombinant strain TY3. The glutathione content in the fermentation broth of TY3 increased to 43.83 mg/l as compared with 33.34 mg/l in the fermentation broth of Y31. The recombinant strain showed a high ${\alpha}$-amylase activity and utilized more than 46% of the starch as the sole carbon source after 5 days. European Brewery Convention tube fermentation tests comparing the fermentation broths of TY3 and Y31 showed that the flavor stability index for TY3 was 1.3-fold higher, whereas its residual sugar concentration was 76.8% lower. Owing to the interruption of the ILV2 gene and ADH2 gene, the contents of diacetyl and acetaldehyde as off-flavor compounds were reduced by 56.93% and 31.25%, respectively, when compared with the contents in the Y31 fermentation broth. In addition, since no drug-resistant genes were introduced to the new recombinant strain, it should be more suitable for use in the beer industry, owing to its better flavor stability and other beneficial characteristics.