• 한국인터넷방송통신학회논문지
• /
• 제10권1호
• /
• pp.7-13
• /
• 2010

질소 분위기하에서 분자선 에피탁시 장치로 성장한 GaN 에피층을 고온 열처리 하였다. 시료는 적절한 조건하에서 급속 열처리 후 구조적인 특성의 향상을 나타내었다. 시료의 결정성의 향상은 에피층의 격자 관련 요소들의 흐트러짐의 감소에 기인한다. 에피층의 열처리는 950도의 급속 열처리로를 이용하여 수행하였다. 고온 급속 열처리가 GaN 에피층의 구조적인 특성들에 미치는 효과는 x선 회절을 통하여 연구하였다. x선 회절 스펙트럼에 있어서 Bragg 피크는 열처리 시간이 증가할수록 각도가 큰 쪽으로 이동하였다. 또한 피크의 FWHM은 열처리 시간이 증가함에 따라 약간의 증가 후 감소하였으며 이후 다시 증가하였다. 이와 같은 결과는 급속 고온 열처리된 GaN 에피층에서 격자 상수에 영향을 미치는 인자들이 에피층의 품질을 좋게 하는 방향으로 일률적으로 변화하는 것이 아니라 에피 품질을 나쁘게 하는 방향으로도 변화한다는 것을 의미한다. 적절한 조건 하에서의 급속 열처리는 에피층의 격자 상수에 관여하는 인자들의 흐트러짐을 감소시켜 에피 결정의 질을 향상시킨다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.51-51
• /
• 2011

We have grown nanocrystalline graphite on sapphire substrate by using solid carbon source molecular beam epitaxy. Changes of structure from amorphous carbon to nanocrystalline graphite controlled by the growth temperature have been investigated by Raman spectroscopy. Raman spectra show D, G, and 2D peaks, whose intensities vary on the growth temperature. Atomic force microscopy reveals that the surface is very flat. Sapphire substrates of different cutting direction produce similar results. Simulations suggest that the interaction between carbon and oxygen causes disorders. Electrical transport measurements exhibit a Dirac-like peak, including a carrier type change by an external gate voltage bias.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.155-156
• /
• 2006

Single crystalline ZnO fims were successfully grown on r-plane sapphire substrate by plasma-assisted molecular beam epitaxy. Epitaxial relationship between the ZnO film and the-r-plane sapphire was determined to be [-1101]$Al_2O_3\;{\parallel}$ [0001]ZnO, [11-20]$Al_2O_3\;{\parallel}$ [-1100]ZnO based on the in-situ RHEED analysis and confirmed again by HRXRD measurements. Grown (11-20) ZnO films showed faceted structure along the <0001> direction and the RMS roughness was about 4 nm.

• 전기전자학회논문지
• /
• 제13권4호
• /
• pp.23-27
• /
• 2009

실리콘 기판 상에 MBE (molecular beam epitaxy)로 형성된 GaSb 기반 p-channel HEMT 소자를 제작하기 위하여 오믹 접촉 형성 공정과 식각 공정을 연구하였다. 먼저 각 소자의 절연을 위한 메사 식각 공정 연구를 수행하였으며, HF기반의 습식 식각 공정과 ICP(inductively coupled plasma)를 이용한 건식 식각 공정이 모두 사용되었다. 이와 함께 소스/드레인 영역 형성을 위한 오믹 접촉 형성 공정에 관한 연구를 진행하였으며 Ge/Au/Ni/Au 금속층 및 $300^{\circ}C$ 60초 RTA공정을 통해 $0.683\;{\Omega}mm$의 접촉 저항을 얻을 수 있었다. 더불어 HEMT 소자의 게이트 형성을 위한 게이트 리세스 공정을 AZ300 현상액과 citric산 기반의 습식 식각을 이용하여 연구하였으며, citric산의 경우 소자 구조에서 캡으로 사용된 GaSb와 베리어로 사용된 AlGaSb사이에서 높은 식각 선택비를 보였다.

• 센서학회지
• /
• 제15권3호
• /
• pp.216-221
• /
• 2006

ZnO thin films prepared by PLD method exhibit an excellent optical property, but may have some problems such as incomplete surface roughness and crystallinity. In this study, undoped ZnO buffer layers were deposited on (0001) sapphire substrates by ultra high vacuum pulse laser deposition (UHV-PLD) and molecular beam epitaxy (MBE) methods, respectively. After post annealing of ZnO buffer layer, undoped ZnO thin films were deposited under different oxygen pressure ($35{\sim}350$ mtorr) conditions. The Arsenic-doped (1, 3 wt%) ZnO thin layers were deposited on the buffer layer of undoped ZnO by UHV-PLD method. The optical property of the ZnO thin films was analyzed by photoluminescence (PL) measurement. The ${\theta}-2{\theta}$ XRD analysis exhibited a strong (002)-peak, which indicates c-axis preferred orientation. Field emission-scanning electron microscope (FE-SEM) revealed that microstructures of the ZnO thin films were varied by oxygen partial pressure, Arsenic doping concentration, and deposition method of the undoped ZnO buffer layer. The denser and smoother films were obtained when employing MBE-buffer layer under lower oxygen partial pressure. It was also found that higher Arsenic concentration gave the enhanced growing of columnar structure of the ZnO thin films.

• 한국진공학회지
• /
• 제7권4호
• /
• pp.334-340
• /
• 1998

Molecular Beam Epitaxy(MBE)법으로 성장된 $In_xGa_{1-x}As/GaAs$ 에피층에 대해 photoreflectance(PR)실험을 통해 특성을 조사하였다. PR 측정결과 성장된 InxGa1-xAs 에피 층의 띠간격 에너지(E0)신호가 시료의 변형(strain)에 의해 heavy-hole(E0(HH))과 light-hole(E0(LH))로 분리되어 관측되었다. 에피층의 조성과 변형은 각각 시료에서의 Eo(HH) 및 Eo(HH)와 Eo(LH)신호의 에너지 차이를 이용하여 구하였다. 또 160K이하의 온 도에서는 Eo(LH)의 신호가 사라짐을 볼 수 있었다. Franz-Keldysh oscillation(FKO) 피크 로부터 계산되어진 InGaAs/GaAs 계면전장(E)은 In조성의 증가에 따라 $0.75{\times}10^5$V/cm에서 $2.66{\times}10^5$V/cm로 증가하였다. In조성이 x=0.09인 시료에 대한 PR신호의 온도의존성 실험에 서 Varshni계수와 Bose-Einstein계수들을 각각 구하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.203.1-203.1
• /
• 2013

Zinc oxide (ZnO) nanocrystalline thin films on various growth temperatures for active layer and different buffer layer thickness were grown by plasma-assisted molecular beam epitaxy (PA-MBE) on Si substrates. The ZnO active layer were grown with various growth temperature from 500 to $800^{\circ}C$ and the ZnO buffer layer were grown for different time from 5 to 40 minutes. To investigate the structural and optical properties of the ZnO thin films, scanning electron microscope (SEM), X-ray diffractometer (XRD), and photoluminescence (PL) spectroscopy were used, respectively. In the SEM images, the ZnO thin films have high densification of grains and good roughness and uniformity at $800^{\circ}C$ for active layer growth temperature and 20 minutes for buffer layer growth time, respectively. The PL spectra of ZnO buffer layers and active layers display sharp near band edge (NBE) emissions in UV range and broad deep level emissions (DLE) in visible range. The intensity of NBE peaks for the ZnO thin films significantly increase with increase in the active layer growth temperature. In addition, the NBE peak at 20 minutes for buffer layer growth time has the largest emission intensity and the intensity of DLE peaks decrease with increase in the growth time.

• 한국전기전자재료학회논문지
• /
• 제26권6호
• /
• pp.446-450
• /
• 2013

Growth mechanism of GS-MBE(Gas source-Molecular Beam Epitaxy) has been investigated. We observed that the growth rate of GaN films is changing from 520 nm/h to 440 nm/h by the variation of V/III ratio under nitrogen-rich growth condition. It was explained that the amount of hydrogen on the growth front varies by the ammonia flow, and gallium hydrides are generated on the surface by a reaction of hydrogen and gallium, resultantly the amount of gallium supplying is changing along with the $NH_3$ flow. Reflection high energy electron diffraction (RHEED) observation was used to confirm the N-rich condition. The crystal quality of GaN was estimated by photoluminescence (PL) and X-ray diffraction (XRD).

• 열처리공학회지
• /
• 제31권5호
• /
• pp.237-243
• /
• 2018

In-rich InGaN epilayers were grown on (0001) sapphire substrates by radio-frequency plasma-assisted molecular beam epitaxy (RF-MBE). InGaN epilayers grown at various growth condition were observed by SEM, XRD, and RHEED. When plasma power of nitrogen increased from 290 to 350 W, surface morphology and crystal quality became worse according to more active nitrogen on the surface of InGaN at N-rich growth condition. As In composition was reduced from 89 to 71% by changing the incoming flux of In and Ga, surface morphology and crystal quality became worse. In addition, weak peaks of cubic InGaN phase was observed from InGaN layer with 71% In composition by XRD ${\Phi}$ scan measurement. When growth temperature decreased from 500 to $400^{\circ}C$, RHEED diffraction pattern was changed to be from streaky to spotty which means atomically rough surface, and spotty pattern showed cubic symmetry of InGaN clearly. XRD ${\Phi}$ scan measurement gave clear evidence that more cubic InGaN phase was formed at low growth temperature. All these results indicates that extremely low surface mobility of Ga adatom caused inferior crystal quality and cubic InGaN phase.

• 전자공학회논문지A
• /
• 제32A권12호
• /
• pp.142-148
• /
• 1995

Sb ${\delta}$-doped Si layers were grown by Si MBE (Molecular Beam Epitaxy) system using substrate temperature modulation technique. The Si substrate temperatures were modulated between 350$^{\circ}C$ and 600$^{\circ}C$. The doping profile was as narrow as 41$\AA$ and the doping concentration of up to 3.5${\times}10^{20}cm^{3}$ was obtained. The film quality was as good as bulk material as verified by RHEED (Reflected High Energy Electron Diffraction), SRP (Spreading Resistance Profiling) and Hall measurement. Since the film quality is not degraded after the growth a Sb ${\delta}$-doped Si layer, the ${\delta}$-doped layers can be repeated as many times as we want. The doping technique is useful for many Si devices including small scale devices and those which utilize quantum mechanical effects.