• Journal of the Korea Computer Industry Society
• /
• v.2 no.8
• /
• pp.1133-1138
• /
• 2001

In this paper, we implemented that MMT(Multimedia Terminal) demonstrates spot news, weather forecast, sports news and cultural news employed CDMA mobile communication networks. The MMT displays mobile pictures/joint pictures/on screen ad and to make known Bus stop or Mobile stations. The MMT gives driver's and passenger's safety and valuable information for one's use GPS satellites. We verified to make real time mobile picture transfer use of CDMA2000 1×(IS-95C) network and development the scheduler control each module. This system tested on vehicle that train and bus. MMT was implemented high reliability and stability by the embedded system. The mobile terminal shows reliable data transfer rate about 74Kbps on IS-95C.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.10
• /
• pp.1-7
• /
• 1999

As our society turns into the information age we ate witnessing increased productivity by employing electronic document management replacing the traditional paper-based document management and by various application programs using the intranet technology This paper describes design and implementation of an electronic document management system in intranet environment. The user and general administration systems made use of Internet Explorer 4.0 and the related technology therefore it solved the problems of client systems, which were largely dependent on hardware platform. The server and the scan station systems, which require proprietary device driver, were implemented client/server system based on TCP/IP. The jukebox system managing storage of vast amount of data was built by API supporting standard SCSI-ll. The GUI of the jukebox module was employed Motif to enhance the compatibility and ease of use.

• Journal of Digital Contents Society
• /
• v.18 no.7
• /
• pp.1451-1456
• /
• 2017

In this research we discuss an integrated actuator-control system for advanced control of a smart Shape Memory Alloy (SMA) actuator. Toward this goal, we designed and fabricated an actuator-control module combining two SMA actuating units with a single-chip microprocessor, two different sensing elements, and an actuator driver. In our proposed system, sensing elements include a 6-axis single-chip motion sensor for orientation measurement and a circuit for resistance measurement of SMA wires. We experimentally verified our proposed actuator-control system using actuator driving, sensor data readings, and communication tests.

• Journal of Drive and Control
• /
• v.16 no.4
• /
• pp.48-55
• /
• 2019

The Electronic Stability Program (ESP), a system that improves vehicle safety, also known as YMC (Yaw Motion Controller) or VDC (Vehicle Dynamics Control), is a system that operates in unstable or sudden driving and braking situations. Developing conditions such as unstable or sudden driving and braking situations in a vehicle are very dangerous unless you are an experienced professional driver. Additionally, many repetitive tests are required to collect reliable data, and there are many variables to consider such as changes in the weather, road surface, and tire condition. To overcome this problem, in this paper, hardware and control software such as the ESP controller, vehicle engine, ABS, and TCS module, composed of three control zones, are modeled using MATLAB/SIMULINK, and the vehicle, climate, and road surface. Various environmental variables such as the driving course were modeled and studied for the real-time ESP real-time simulator that can be repeatedly tested under the same conditions.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.1
• /
• pp.150-157
• /
• 2016

In this paper, a control system for E-bike based on IOT was developed, which collects and monitors information of states of E-bike and surrounding environments from several sensors and control devices in E-bike, and informs the possible dangers to rider when riding the E-bike. Developed electronic control system can manage battery efficiently, obtain battery's remaining power in real-time and provide possible riding distance to rider. It makes possible for rider to schedule near optimal riding route in terms of battery usage and respond quickly to battery discharge. Results of applying developed system to E-bike show that according to driving-mode, possible driving distance can be calculated efficiently and using user application App, real-time driver position marking and driving route searching functions lead to energy efficient E-bike driving. Later we will endeavor to integrate BMS, ECU, smart-phone and PC(server) to provide stable driving system based on various driving information of E-bike.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.46 no.4
• /
• pp.64-69
• /
• 2009

This paper addresses the simulation methodology of signal integrity and power integrity for mobile display modules. The proposed technique can be applied to analyse a circuit module which consist of connector, FPCB and driver ICs. The recent demand of serial interconnection technology in the mobile display industry needs delicate impedance control of signal and power traces to prohibit system malfunctioning and to reduce electromagnetic field radiation. Based on the S-parameter and Z-parameter analysis, we analyse the correlation between frequency-domain and time-domain measurements. With multi-port macros, signal integrity can be included in power integrity analysis in time domain.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.38-45
• /
• 2013

In this study, for carrying out the spray and combustion experiment using a Common Rail Direct Injection(CRDI) system, the controller was fabricated to drive a high speed camera, a injector and a laser beam sequentially at a low cost. CB280 module of one-chip micro processer was used for the controller. In order to confirm responsibility and utility of the controller, the current drive performance, the spray behavior and the injection rate were tested and analyzed under various experimental conditions. As this research results, we found that the fabricated controller was able to control the devices for the spray experiment precisely with the input value in program and it had the dynamic load responsibility and repetition. Also, we found that the injection rates of our experimental results were higher than those of others at the same injection pressure and the controller connected with the laser system and the data acquisition system had validity for carrying out the spray visualization experiment.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.6
• /
• pp.875-882
• /
• 2010

Nowadays, the global market requires a variety of products and shorter life cycle to fulfill the diverse demands of customers. To survive in the turbulent and competitive markets, automobile assembly companies must design and implement manufacturing systems that respond rapidly to market demands. In this paper, methods for reconfiguring system based on modular concept is proposed using AR(Augmented reality) technologies. First, the relationship matrixes between change drivers and system components are generated to divide existing manufacturing system to each module. And, new change drivers are selected based on required function in new system. Through the modification of relationship matrix, the concept design of new system is proposed and implemented in AR environment. Finally, according to proposed methods and procedure in this paper, the existing cockpit assembly system is reconfigured to spare tire assembly system as a case study. As the use of the modular-based reconfiguration method in AR environment, the time and cost for reconfiguring manufacturing system will be reduced dramatically.

• Journal of electromagnetic engineering and science
• /
• v.14 no.2
• /
• pp.68-73
• /
• 2014

A linear stacked field-effect transistor (FET) power amplifier (PA) is implemented using a $0.18-{\mu}m$ silicon-on-insulator CMOS process for W-CDMA handset applications. Phase distortion by the nonlinear gate-source capacitance ($C_{gs}$) of the common-source transistor, which is one of the major nonlinear sources for intermodulation distortion, is compensated by employing a PMOS linearizer with improved AM-PM. The linearizer is used at the gate of the driver-stage instead of main-stage transistor, thereby avoiding excessive capacitance loading while compensating the AM-PM distortions of both stages. The fabricated 836.5 MHz linear PA module shows an adjacent channel leakage ratio better than -40 dBc up to the rated linear output power of 27.1 dBm, and power-added efficiency of 45.6% at 27.1 dBm without digital pre-distortion.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.612-615
• /
• 2013

Hub BLDC(Brushless Direct Current) motor, called wheel-in motor is a outer rotor type high efficient direct driving motor which have a multi-pole permanent magnet type rotor as a driving wheel. This study shows a hub BLDC motor speed controller design methode using PIC micro controller to drive 2 wheels or 3 wheels driving body having hub motor driving shaft. The motor driver unit consists of six discrete MOSFET switching devices and the gate driving module is directly designed for high economy.