• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 추계학술대회
• /
• pp.209-211
• /
• 2022

우리나라 R-Mode(Ranging Mode) 항법시스템은 국제해사기구(IMO, International Maritime Organization)에서 요구하는 항구 입출항용 항법 요구성능(정밀도 10m)을 만족하도록 개발을 진행하고 있다. R-Mode 항법시스템은 위성국 송출을 기반으로 하는 GPS와 달리 지상국 송출을 기반으로 한다. 또한 신호가 세기가 높아서 의도적 전파간섭이 어려우므로 국제해사기구가 요구하는 강인한 PNT(Resilient PNT) 시스템에 적합한 것으로 평가받고 있다. 이러한 요구조건과 기회신호(SoOp, Signal of Opportunity)의 국내 환경에 맞추어 중파(MF, Middle Frequency) 및 초단파(VHF, Very High Frequency)를 이용하는 항법시스템을 개발하고 있다. 해양수산부의 지원으로 2020년에 착수하여 4국의 중파 R-Mode 송신국과 3국의 초단파 VDES R-Mode 송신국 구축을 진행하고 있다. 항법 성능을 확보하기 위하여 R-Mode 보정시스템과 R-Mode 감시시스템을 구축하였다. 해양에서 R-Mode 항법시스템의 성능을 검증하기 위하여 중파 R-Mode 수신기, VDES R-Mode 수신기 및 이를 포함하는 통합항법수신기를 함께 개발하고 있다. 항법 송신기 및 수신기의 성능 검증을 위한 테스트베드는 기존의 지상파 항법(eLoran) 서비스 영역, 중파 R-Mode 서비스 영역 및 주요 항만 등을 고려하여 충청남도 서산시 대산항 지역으로 선정하였다. 보정국 및 감시국을 포함하는 테스트베드 기지국은 대산항에 설치하여 운영을 시작하였다. 테스트베드 실해역 시험을 통한 성능 검증은 2023년 상반기에 진행될 계획이다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.261-265
• /
• 2002

In the machining tool avoid vibration problem have an effect on high precision as well as statical and thermal characteristics. Therefore overcome this problem is essential to advance of machine tool and machining skill. Even though vibration arises owing to a variety of causes, in this paper vibration analysis of column as a major part of machine tool structures is presented. At this procedure vibration analysis applied to mode synthesis method using a attachment mode .

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.658-660
• /
• 1995

This paper presents a performance analysis of the multiple sliding mode control for SISO system. The multiple sliding mode control technique uses sliding surfaces for each state. The performance analysis is done by comparison between the multiple sliding mode control and the sliding mode control. Overall performance of the multiple sliding mode control is improved over that of the sliding mode control. Results of numerical simulations are presented.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.201-204
• /
• 1999

Polarization mode dispersion (PMD) restrict the bend-width of single mode optical filer, and it is important parameter in the optical fiber having long-length. Although fiber has perfect circular symmetry, fiber bending, twisting and laws governing manufacture cause additional Polarization mode dispersion. The effect of polarization mode dispersion in general single mode fiber of long length is discussed in this paper. Measurement of PMD with random mode coupling were conducted in two kind of fibers using different laws governing manufacture and interferometric method.

• 대한디지털의료영상학회논문지
• /
• 제14권2호
• /
• pp.23-31
• /
• 2012

There are AEC mode and fix mode to exposure when the whole spine antero-posterior radiography is done by using DR equipment. This study compared the utility of fix mode to AEC mode, by evaluating organ dose and effective dose and by examining the quality of radiographic image. GE DEFINIUM 8000 and ART-200X Rando Phantom manufactured by Flukebiometical were used for this study. The Rando phantom was set in front of wall detector of X-rays equipment. AEC mode was set at 80kVp and Fix mode was set at 80kVp, 25mAs, 32mAs, 40mAs, and 50mAs. Whole spine AP image were aquired by combining C, T-L and L-S spine images obtained through 3 exposures. When obtaining C, T-L and L-S spine images, were checked for Air kerma (mGy) value calculated by UNFORS Xi meter attached at the phantom surface of center of radiation field. The effective and organ doses were compared by PCXMC program (PC-Based Monte Carlo Program). The quality of obtained radiographic image was evaluated visually by 3 radiologists using resolution chart. When the effective doses was calculated based on tissue weighting factor of ICRP-103, 1.278mSv was measured by AEC mode, and Fix mode measured 0.405mSv at 25mAs, 0.518mSv at 32mAs, 0.649mSv at 40mAs, and 0.810mSv at 50mAS. In addition, the organ dose measured with esposure at 25mAs by Fix mode was almost equivalent to the organ dose by AEC mode, at the esophagus, thyroid, oral mucosa, salivaly glands located at the cervical spine part, while the organ dose by Fix mode was in general lower than the organ dose by AEC mode at the other organs. When Fix mode at 32mAs, 40mAs, and 50mAs was compared to AEC mode for organ dose in 26 organs, AEC mode had higher measurement in 21 organs but not for than brain, trachea, thyroid, oral mucosa, and salivaly glands which are located at the cervical spine part. The image quality evaluated by resolution test chart was much higher with AEC mode than the quality with Fix mode at all exposure conditions. However, while the image quality of cervical spine exposured at 50mAs by Fix mode was lower than the quality of AEC mode, thoraco-lumbar spine and lumbo-sacral spine were calculated and the quality was similar to AEC mode. Scoliosis occurs mainly at thoraco-lumbar and lumbo-sacral spine, not at cervical spine. Compared to AEC mode, Using the appropriate protocol (80kVp, 50mAs) of fix mode for whole spine AP radiography was thought to be useful because the image quality of the thoraco-lumar and lumbo-sacral spine was similar on AEC mode, Also organ and effective doses can be decreased with Fix mode. Therefore, It is considered that fix mode can be used properly with AEC mode for whole spine AP radiography when considering patient's body posture.

• 대한방사선기술학회지:방사선기술과학
• /
• 제40권2호
• /
• pp.213-218
• /
• 2017

최근 고위험 임신군이 증가함에 따라 과거에 비해 음향파워 세기가 높은 도플러초음파 이용이 산전 진단에서 점차 증가하고 있으며, 여러 기관에서 가이드라인을 설정하여 과도한 노출을 자제하고 있다. 따라서 본 연구에서는 장시간 초음파검사 실시에 따른 검사모드 별 체표면의 온도변화를 알아보고 열효과에 영향을 받지 않는 노출시간을 고찰해 보고자 하였다. 시간경과에 따른 B mode, C mode, PD mode 별 초음파를 조사한 부위와 조사하지 않은 부위의 온도변화를 측정하여 차이를 비교하였으며 B mode는 초음파 조사 후 10분, 50분에서, C mode는 20분부터, PD mode는 30분부터 온도변화에 유의한 차이를 나타내었다(p<0.01). 측정시점에 따라 3개의 mode에서 모두 온도상승에 차이를 보였으며(p<0.000), PD mode가 가장 온도변화에 민감한 반응을 나타내었다. 또한 초음파 노출시간이 증가함에 따라 온도상승 시간이 짧아짐을 알 수 있었다. 따라서 배아나 태아를 관찰하기 위한 초음파검사 시 과도한 검사시간을 피하여 진단목적으로만 신속하게 사용할 것을 권고한다.

• 말소리와 음성과학
• /
• 제4권3호
• /
• pp.119-125
• /
• 2012

This paper describes a new algorithm for encoding spectral shape and envelope in the generic mode of G.718 super-wide band (SWB). In the G.718 SWB coder, generic mode coding and sinusoidal enhancement are used for the quantization of modified discrete cosine transform (MDCT)-based parameters in the high frequency band. In the generic mode, the high frequency band is divided into sub-bands and for every sub-band the most similar match with the selected similarity criteria is searched from the coded and envelope normalized wideband content. In order to improve the quantization scheme in high frequency region of speech/audio signals, the modified generic mode by the improvement of the generic mode in G.718 SWB is proposed. In the proposed generic mode, perceptual vector quantization of spectral envelopes and the resolution increase for spectral copy are used. The performance of the proposed algorithm is evaluated in terms of objective quality. Experimental results show that the proposed algorithm increases the quality of sounds significantly.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.493-498
• /
• 2004

The EMI noise source in a switching mode power supply is dominated by a common mode noise. If we can understand the common mode noise occurring mechanism, it is resulted to find out the method to suppress the EMI noise source in the switching mode power supply. The common mode noise is occurring mostly due to circuit is unbalanced which is caused by the capacitive coupling to frame ground, which passes through a heatsink of the switching devices. This research paper presents a new effective balancing method of buck converter circuit by mean of grounding the parasitic and compensation capacitors in correct proportion which is called that the common mode impedance balance (CMIB). The CMIB can be achieved by source, transmission line and termination balanced, such balancing, the common mode current will be cancelled out in the frame ground. The greatly reduced common mode noise can be confirmed by the experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.186-190
• /
• 2000

This paper propose a "Active common-mode voltage damper circuit" that capable of a suppression of a common-mode voltage produced in the PWM VSI. The four level half-bridge PWM inverter circuit and common-mode transformer are incorporated into the "Active common-mode voltage damper" the design method of which is presented Effect of "Active common-mode voltage damper" in this paper verifies a propriety and effectiveness in 2.2[kW] induction motor drive using IGBT inverter. Experimental results show that "common-mode voltage damper" makes contributions to reducing a high frequency leakage current and common-mode voltage.leakage current and common-mode voltage.

• 전기학회논문지
• /
• 제56권10호
• /
• pp.1868-1871
• /
• 2007

This paper proposes a novel scheme to significantly reduce mode decision time by predicting optimal mode candidates. Unlike previous fast mode decision algorithms computing RDcost in a pre-defined mode order, the proposed scheme predicts optimal mode candidates and calculates their RDcosts first, increasing the possibility to satisfy early-exit conditions sooner, resulting in fast mode decision. This H.264 mode decision time reduction enables small computing power mobile devices to handle H.264 encoding effectively. Extensive simulations show that, when compared with JM10.2, AMD and LCIMS, the proposed scheme boosts H.264 encoding speed by up to 575% with a reasonable image quality degradation.