• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.917-920
• /
• 2005

This paper presents 3D graphics geometry processor for mobile applications. Geometry stage needs to cope with the large amount of computation. Geometry stage consists of transformation process and lighting process. To deal with computation in geometry stage, the vector processor that is based on pipeline chaining is proposed. The performance of proposed 3D graphics geometry processor is up to 4.3M vertex/sec at 100 MHz. Also, the designed processor is compliant with OpenGL ES that is widely used for standard API of embedded system. The proposed structure can be efficiently used in 3D graphics accelerator for mobile applications.

• Journal of IKEEE
• /
• v.13 no.2
• /
• pp.253-259
• /
• 2009

In this paper, we propose a novel architecture of a general graphics shader processor without a dedicated hardware. Recently, mobile devices require the high performance graphics processor as well as the small size, low power. The proposed shader processor is a GP-GPU(General-Purpose computing on Graphics Processing Units) to execute the whole OpenGL ES 2.0 graphics pipeline by using shader instructions. It does not require the separate dedicate H/W such as rasterization on this fully programmable capability. The fully programmable 3D graphics shader processor can reduce much of the graphics hardware. The chip size of the designed shader processor is reduced 60% less than the sizes of previous processors.

• Journal of Korea Multimedia Society
• /
• v.11 no.6
• /
• pp.816-827
• /
• 2008

In this paper, two-stage pipelined floating-point arithmetic unit (FP-AU) is designed. The FP-AU processor supports seventeen operations to apply 3D graphics processor and has area-efficient and low-latency architecture that makes use of modified dual-path computation scheme, new normalization circuit, and modified compound adder based on flagged prefix adder. The FP-AU has about 4-ns delay time at logic synthesis condition using $0.18{\mu}m$ CMOS standard cell library and consists of about 5,930 gates. Because it has 250 MFLOPS execution rate and supports saturated arithmetic including a number of graphics-oriented operations, it is applicable to mobile 3D graphics accelerator efficiently.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.837-840
• /
• 2005

This paper presents 3D graphics lighting processor based on vector processing using pipeline chaining. The lighting process of 3D graphics rendering contains many arithmetic operations and its complexity is very high. For high throughput, proposed processor uses pipelined functional units. To implement fully pipelined architecture, we have to use many functional units. Hence, the number of functional units is restricted. However, with the restricted number of pipelined functional units, the utilization of the units is reduced and a resource reservation problem is caused. To resolve these problems, the proposed architecture uses vector processing using pipeline chaining. Due to its pipeline chaining based architecture, it can perform 4.09M vertices per 1 second with 100MHz frequency. The proposed 3D graphics lighting processor is compatible with OpenGL ES API and the design is implemented and verified on FPGA.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.8 no.2
• /
• pp.87-93
• /
• 2013

In this paper, we implemented and evaluated the performance of a vector-based rasterization algorithm of 3D graphics using a SIMD-based many-core processor that consists of 4,096 processing elements. In addition, we compared the performance and efficiency of the rasterization algorithm using the many-core processor and commercial GPU (Graphics Processing Unit) system which consists of 7 GPUs and each of which have 512 cores. Experimental results showed that the SIMD-based many-core processor outperforms the commercial GPU system in terms of execution time (3.13x speedup), energy efficiency (17.5x better), and area efficiency (13.3x better). These results demonstrate that the SIMD-based many-core processor has potential as an embedded mobile processor.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.59-70
• /
• 2007

In this paper, we proposed an effective T&L(Transform & Lighting) Processor architecture for a real time 3D graphics acceleration SoC(System on a Chip) in a mobile system. We designed Floating point arithmetic IPs for a T&L processor. And we verified IPs using a SoC Platform. Designed T&L Processor consists of 24 bit floating point data format and 16 bit fixed point data format, and supports the pipeline keeping the balance between Transform process and Lighting process using a parallel computation of 3D graphics. The delay of pipeline processing only Transform operation is almost same as the delay processing both Transform operation and Lighting operation. Designed T&L Processor is implemented and verified using a SoC Platform. The T&L Processor operates at 80MHz frequency in Xilinx-Virtex4 FPGA. The processing speed is measured at the rate of 20M Vertexes/sec.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.4
• /
• pp.727-736
• /
• 2009

In this paper, the $arccos(cos^{-1})$ arithmetic unit for mobile graphics accelerator is designed. The mobile vector graphics applications need tight area, execution time, power dissipation, and accuracy constraints compared to desktop PC applications. The designed processor adopts 2nd-order polynomial approximation scheme based on IEEE floating point data format to satisfy speed and accuracy conditions and reduces area via hardware sharing structure. The arccosine processor consists of 15,280 gates and its estimated operating frequency is about 125Mhz at operating condition of $0.35{\mu}m$ CMOS technology. Because the processor can execute arccosine function within 7 clock cycles, it has about 17 MOPS(million arccos operations per second) execution rate and can be applicable to mobile OpenVG processor. And because of its flexible architecture, it can be applicable to the various transcendental functions such as exponential, trigonometric and logarithmic functions via replacement of ROM and minor hardware modification.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.10
• /
• pp.23-32
• /
• 2007

This paper proposes a reconfigurable parallel processor architecture which can efficiently implement various multimedia applications, such as 3D graphics, H.264/H.263/MPEG-4, JPEG/JPEG2000, and MP3. The proposed architecture directly connects memories and processors so that memory access time and power consumption are reduced. It supports floating-point operations needed in the geometry stage of 3D graphics. It adopts partitioned SIMD to reduce hardware costs. Conditional execution of instructions is used for easy development of parallel algorithms.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.140-142
• /
• 2011

In this paper, special purpose arithmetic unit for mobile graphics accelerator is designed. The designed processor supports six operations, such as $1/{\chi}$, $\frac{1}{{\sqrt{x}}$, $log_2x$, $2^x$, $sin(x)$, $cos(x)$. The processor adopts 2nd-order polynomial minimax approximation scheme based on IEEE floating point data format to satisfy accuracy conditions and has 5-stage pipeline structure to meet high operational rates. The SFAU processor consists of 23,000 gates and its estimated operating frequency is about 400 Mhz at operating condition of 65nm CMOS technology. Because the processor can execute all operations with 5-stage pipeline scheme, it has about 400 MOPS(million operations per second) execution rate. Thus, it can be applicable to the 3D mobile graphics processors.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.24-33
• /
• 2006

The effective geometry processing IP architecture for mobile SoC that has real time 3D graphics acceleration performance in mobile information system is proposed. Base on the proposed IP architecture, we design the floating point arithmetic unit needed in geometry process and the floating point geometry processor supporting the 3D graphic international standard OpenGL-ES. The geometry processor is implemented by 160k gate area in a Xilinx-Vertex FPGA and we measure the performance of geometry processor using the actual 3D graphic data at 80MHz frequency environment The experiment result shows 1.5M polygons/sec processing performance. The power consumption is measured to 83.6mW at Hynix 0.25um CMOS@50MHz.