• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 F
• /
• pp.2604-2606
• /
• 1999

The dead time deteriorates the output performance of the PWM inverter so that various compensation schemes have been proposed. If the modulation index is rendered with the low output frequencies, those schemes do not work well because of the zero clamping phenomena. In this paper, we investigate the influence of the dead time minimization algorithm on the low output voltage reference. The validity of the algorithm is examined by comparing the simulation results with those of conventional methods.

• Journal of Mechanical Science and Technology
• /
• 제15권7호
• /
• pp.831-838
• /
• 2001

Torque ripple control of brushless DC motor has long been the main issue of the servo drive systems in which the speed fluctuation, vibration and acoustic noise need to be minimized. The vast majority of the methods for suppressing the torque ripple require the Fourier series analysis and either the iterative or least mean square minimization. In this paper, a novel approach based on the d-q-0 reference frame that achieves ripple-free torque control with maximum efficiency is presented. The proposed method optimizes the reference phase current waveforms including even the case of 3-phase unbalanced condition, and the motor winding currents are controlled to track the optimized current waveforms by the delta modulation technique. As a results, the proposed approach provides a simple and yet effectine means for obtaining the optimal motor excitation currents. The validity and applicability of the proposed control scheme are verified through simulations and experimental investigations.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2009년도 IWAIT
• /
• pp.103-107
• /
• 2009

This paper presents how to minimize the second-order cone programming problem occurring in the 3D reconstruction of multiple views. The $L_{\infty}$-norm minimization is done by a series of the minimization of the maximum infeasibility. Since the problem has many inequality constraints, we have to adopt methods of the interior point algorithm, in which the inequalities are sequentially approximated by log-barrier functions. An initial feasible solution is found easily by the construction of the problem. Actual computing is done by an iterative Newton-style update. When we apply the interior point method to the problem of reconstructing the structure and motion, every Newton update requires to solve a very large system of linear equations. We show that the sparse bundle-adjustment technique can be utilized in the same way during the Newton update, and therefore we obtain a very efficient computation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.518-523
• /
• 1998

In this paper, a noble dead time minimization algorithm is presented for developing the outputs of inverters. The adverse effects of the dead time are examined. The principle of the proposed algorithm is explained with the conduction modes of the output currents. The H/W and the S/W construction method of the proposed algorithm are also presented. The validity of the proposed algorithm is verified by comparing simulation and experimental results with those of the conventional methods. It can be concluded from the results that the proposed algorithm have the virtue which is able to ruduce the numbers of inverter switching and the harmonics in the output voltages, and which make the output voltage equal to the reference value.

• 전기의세계
• /
• 제30권2호
• /
• pp.101-111
• /
• 1981

This paper describes two methods which generate all the prime implicants (PI's) quickly by using the directions of adjacency tavle (DA-table) that gives the knowledge of adjacency relations among the given minterms. One is a graphical method that enables us to generate PI's by hand, the other is a checking method that determines the existance of PI's quickly when it is programmed on a digital computer. And a fast minimization algorithm will be shown in this paper that can be implemented with reduced computational effort by selecting essential prime implicants (EPI's) first of all and using the concept of the integration of the PI identification and selection procedure. The procedure, proposed in this paper, has all the advantage of Karnaugh mapping, so the procedure is simple and easy.

• 전자공학회논문지C
• /
• 제34C권2호
• /
• pp.12-18
• /
• 1997

An efficient synthesis method of cellular architecture FPgA is proposed in this paper. To generate a logical representation called complex term which is to be directly mapped onto the cellular architecture FPGA, and SO or ESOP minimization tool was used in previous methods. Instead, we use a logic function transformed into BDD (binary decision diagram) in the actual generation of the complex temrs. In this process it estimates the cost(i.e. the number of complex terms) for three branches, 0-branch and 1-branches. This process is continued over the whole BDD to do such computation, and we observed that the number of complex terms has been reduced compared to the previous results.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.361-368
• /
• 2002

A new remeshing algorithm based on the energy minimization is proposed for the finite element method. This utilizes the variation of mapping function between the master and global elements. The resultant equations are only the other form of the governing equations. However the equations have an important information about the relations between the elements. By assuming the solutions of the governing equations, these relations are used very usefully for the mesh optimization. The explicit formulations are presented for the relations of 1-dimensional equations and some examples are solved for comparison with the other methods. In addition, 2-dimensional expansion is presented for the general use.

• Structural Engineering and Mechanics
• /
• 제48권6호
• /
• pp.849-878
• /
• 2013

This paper consists of two parts, which broadly examines solution techniques abilities for the structures with geometrical nonlinear behavior. In part I of the article, formulations of several well-known approaches will be presented. These solution strategies include different groups, such as: residual load minimization, normal plane, updated normal plane, cylindrical arc length, work control, residual displacement minimization, generalized displacement control, modified normal flow, and three-parameter ellipsoidal, hyperbolic, and polynomial schemes. For better understanding and easier application of the solution techniques, a consistent mathematical notation is employed in all formulations for correction and predictor steps. Moreover, other features of these approaches and their algorithms will be investigated. Common methods of determining the amount and sign of load factor increment in the predictor step and choosing the correct root in predictor and corrector step will be reviewed. The way that these features are determined is very important for tracing of the structural equilibrium path. In the second part of article, robustness and efficiency of the solution schemes will be comprehensively evaluated by performing numerical analyses.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• 복식
• /
• 제62권7호
• /
• pp.97-116
• /
• 2012

The purpose of this study is to analyze the trench coat designs shown in the latest collection by using a checklist method among many fashion design idea methods and then investigate the trend of trench coat design in multilateral directions. As for the research method, 1,307 photos selected from the photos of women's trench coats publicized from 2006 until 2011 were used for the analysis and then a frequency analysis was conducted. As a result, the types of checklist methods shown in trench coats included modification type, elimination type, conversion type, combination type, minimization type, addition type, and magnification type. In the modification type, the modification of color to the back side stood out; in the elimination type, the design eliminating epaulet stood out ; in the conversion type, conversion to jacket among many items stood out. In the combination type, the combination between different material texture and identical colors among colors stood out ; in the minimization type, the design minimizing sleeves stood out; in the addition type, the addition of sleeves among many details stood out ; in the magnification type, the design magnifying panels stood out.