• Korean Journal of Plant Resources
• /
• v.15 no.2
• /
• pp.123-127
• /
• 2002

In order to obtain basic informations for selecting early maturing rice varieties which is suitable for early cropping before Alisma plantago in the southern part of Korea. Eleven rice varieties were grown from May to September in 1999∼2001 at Sunchon Youngieon Experiment Field and yield components and yield of plants were investingated. Early maturing rice cv. Jinbubyeo showed higher rough rice yield than any other varieties used in the experiment. It showed high yield components, culm length, panicle length, number of panicles per plant, number of spikelets per panicle and ratio of ripened grains. therefore, it was concluded that Jinbubyeo was the most suitable variety with high yield for the cultivation before Alisma plantago at the southern part of Korea. The heritability of culm length number of spikelets per panicle and rough rice yield were high and that of panicle length number of panicle per plant, ratio of ripened grain and 1,000 grain wt. of milled rice were low. The rough rice yield showed highly significant positive correlations with culm length, panicle length, number of spikelets per panicles and ratio of ripened grains.

• Journal of Powder Materials
• /
• v.17 no.6
• /
• pp.443-448
• /
• 2010

The $\beta$ phase Ti-Nb-Sn-HA bio materials were successfully fabricated by high energy mechanical milling and pulse current activated sintering (PCAS). Ti-6Al-4V ELI alloy has been widely used as biomaterial. But the Al has been inducing Alzheimer disease and V is classified as toxic element. In this study, ultra fine sized Ti-Nb-Sn-HA powder was produced by high energy mechanical milling machine. The $\beta$ phase Ti-Nb-Sn-HA powders were obtained after 12hr milling from $\alpha$ phase. And ultra fine grain sized Ti-Nb-Sn-HA composites could be fabricated using PCAS without grain growth. After sintering, the microstructures and phase-transformation of Ti-Nb-Sn-HA biomaterials were analyzed by scanning electron microscope (SEM) and X-ray diffraction (XRD). The relative density was obtained by Archimedes principle and the hardness was measured by Vickers hardness tester. The $\beta$-Ti phase was obtained after 12h milling. As result of hardness and relative density, 12h milled Ti-Nb-Sn-HA composite has the highest values.

• Korean Journal of Breeding Science
• /
• v.43 no.5
• /
• pp.383-390
• /
• 2011

Near-isogenic lines (NILs) carrying bacterial blight resistance genes (Xa4, xa5 and Xa21) were developed in japonica rice using Suweon345 as genetic background. NILs were selected by gene specific DNA markers and inoculation of K1 or K3a race. NILs conferring Xa4 were resistant to K1, K2, K3, and moderately resistant to K3a. NILs conferring xa5 were resistant to K1, K2, K3, and K3a. NILs having Xa21 were susceptible to K1, while resistant to K2, K3 and K3a. Target genes of NILs with the genetic background of Suweon345 were also confirmed by using eleven Philippines races and International Rice Bacterial Blight (IRBB) NILs carrying Xa4, xa5 and Xa21. All NILs had no significant difference from their recurrent parents in the major agronomic traits except for panicle length and brown rice 1,000 grain weight. Heading date of NILs ranged from Aug. 10 to Aug. 11, which was similar to that of recurrent parent, Suweon345. Culm length, number of grains per panicle and ratio of ripened grain of NILs were similar to those of Suweon345. Milled rice of NILs was ranged from 4.82 to 4.93MT/ha. These NILs will be useful for improving resistance to K3a race of bacterial blight pathogens in Korean japonica cultivars.

• Journal of Powder Materials
• /
• v.26 no.2
• /
• pp.132-137
• /
• 2019

Tungsten carbide (WC) hard materials are used in various industries and possess a superior hardness compared to other hard materials. They have particularly high melting points, high strength, and abrasion resistance. Accordingly, tungsten carbide hard materials are used for wear-resistant tools, cutting tools, machining tools, and other tooling materials. In this study, the WC-5wt.%Co, Fe, Ni hard materials are densified using the horizontal ball milled WC-Co, WC-Fe, and WC-Ni powders by a spark plasma sintering process. The WC-5Co, WC-5Fe, and WC-5Ni hard materials are almost completely densified with a relative density of up to 99.6% after simultaneous application of a pressure of 60 MPa and an electric current for about 15 min without any significant change in the grain size. The average grain size of WC-5Co, WC-5Fe, and WC-5Ni that was produced through SPS was about 0.421, 0.779, and $0.429{\mu}m$, respectively. The hardness and fracture toughness of the dense WC-5Co, WC-5Fe, WC-5Ni hard materials were also investigated.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.392-396
• /
• 2021

Expensive PCBN or ceramic cutting tools are used for processing of difficult-to-cut materials such as Ti and Ni alloy materials. These tools have the problem of breaking easily due to their high hardness but low fracture toughness. To solve these problems, cutting tools that form various coating layers are used in low-cost WC-Co hard material tools, and research on various tool materials is being conducted. In this study, binderless-WC, WC-6 wt%Co, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are densified using horizontal ball milled WC-Co, WC-Co-Mo₂C powders, and spark plasma sintering process (SPS process). Each SPSed Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are almost completely dense, with relative density of up to 99.5 % after the simultaneous application of pressure of 60 MPa and almost no significant change in grain size. The average grain sizes of WC for Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are about 0.37, 0.6, 0.54, and 0.43 ㎛, respectively. Mechanical properties, microstructure, and phase analysis of SPSed Binderless-WC, WC-6 wt%Co-1 wt% Mo₂C, and WC-6 wt%Co-2.5 wt% Mo₂C hard materials are investigated.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.424-431
• /
• 2013

Consumption of waxy corn is steadily increasing due to consumer preference for natural food. However, availability of waxy corn is limited because most of them are used for steamed waxy corn. It is therefore important to create new demands of waxy corn using food processing technology. There is little prior research about characteristics of milled kernel in waxy corn. This study examined the physicochemical and cooking properties of milled kernel using nine waxy corn hybrids. Colored hybrids (Heukjinju, Miheukchal, and Eolrukchal1) showed high milling yield and low change of grain length after milling process compared to other hybrids. The total starch content ranged from 62.1 to 68.4% and the gelatinization temperature of starch was lowest in Yeonnong1 ($69.9^{\circ}C$). The breakdown viscosity of Yeonnong1, Miheukchal and Heukjinju was higher than those of tested hybrids, whereas setback viscosity of those hybrids was lower. In cooking properties of milled waxy corn, water absorption and volume expansion rate were high in Yeonnong2 (84.9, 219.3%), Miheukchal (85.9, 211.4%), and Heukjinju (80.9, 203.7%). In the sensory test, the overall preference was significantly higher in Heukjinju and Miheukchal. Thus, Heukjinju, Yeonnong2, and Miheukchal showed good scores in milling yield, cooking properties, and the preference of sensory test. These results will provide fundamental information to extend milled waxy corns usage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.7
• /
• pp.815-819
• /
• 2008

The colored rice, particularly black rice, has been well characterized to possess antioxidant properties. Rice bran, a by-product of the rice milling process, contains high levels of several phytochemicals which have antioxidant activities as well as health-beneficial properties. The purposes of this study were to evaluate the antioxidant compounds and antioxidant activities of the methanolic extracts from milling fractions and whole grain of two black rice cultivars. Whole black rice of the two cultivars were milled into rice bran and endosperm using the gradual milling system. These were evaluated for antioxidative activities by DPPH and ABTS radical scavenging activities. To determine the antioxidant compounds in the methanolic extract from the milling fractions, the content of polyphenolics, flavonoids, anthocycanins and ${\gamma}$-oryzanol were measured by spectrophotometric methods and vitamin E analysis was carried out by HPLC. The yield of whole black rice, rice bran, and endosperm were 3.1, 15.3, and 0.9% for Heugjinjubyeo and 2.7, 15.5, and 1.1% for Heugkwangbyeo, respectively. The methanolic extracts from rice bran showed generally higher antioxidant activities than the extracts from whole grain and endosperm. In addition, antioxidant compounds distributed much higher contents in rice bran extract than in the extracts from whole grain and endosperm. A significant correlation was also noted between free radical scavenging activity and polyphenolic compounds. The results of this study show that notable antioxidant activity in black rice bran are considered to have significant health benefits.

• Journal of Biosystems Engineering
• /
• v.43 no.2
• /
• pp.148-159
• /
• 2018

Purpose: Unmanned air vehicle (UAV) remote sensing was applied to test various vegetation indices and make prediction models of protein content of rice for monitoring grain quality and proper management practice. Methods: Image acquisition was carried out by using NIR (Green, Red, NIR), RGB and RE (Blue, Green, Red-edge) camera mounted on UAV. Sampling was done synchronously at the geo-referenced points and GPS locations were recorded. Paddy samples were air-dried to 15% moisture content, and then dehulled and milled to 92% milling yield and measured the protein content by near-infrared spectroscopy. Results: Artificial neural network showed the better performance with $R^2$ (coefficient of determination) of 0.740, NSE (Nash-Sutcliffe model efficiency coefficient) of 0.733 and RMSE (root mean square error) of 0.187% considering all 54 samples than the models developed by PR (polynomial regression), SLR (simple linear regression), and PLSR (partial least square regression). PLSR calibration models showed almost similar result with PR as 0.663 ($R^2$) and 0.169% (RMSE) for cloud-free samples and 0.491 ($R^2$) and 0.217% (RMSE) for cloud-shadowed samples. However, the validation models performed poorly. This study revealed that there is a highly significant correlation between NDVI (normalized difference vegetation index) and protein content in rice. For the cloud-free samples, the SLR models showed $R^2=0.553$ and RMSE = 0.210%, and for cloud-shadowed samples showed 0.479 as $R^2$ and 0.225% as RMSE respectively. Conclusion: There is a significant correlation between spectral bands and grain protein content. Artificial neural networks have the strong advantages to fit the nonlinear problem when a sigmoid activation function is used in the hidden layer. Quantitatively, the neural network model obtained a higher precision result with a mean absolute relative error (MARE) of 2.18% and root mean square error (RMSE) of 0.187%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.11
• /
• pp.1541-1552
• /
• 2004

The effect of eight varieties of whole crop rice silage (WCRS) harvested at four stages of maturity were investigated for in situ DM and N degradability, ME and MP yield and content in an 8${\times}$4 factorial experiment. The varieties were Akichikara, Fukuhibiki, Habataki, Hamasari, Hokuriku 168, Kusanami, Tamakei 96 and Yumetoiro. Hamasari and Kusanami were forage varieties while all others were grain varieties. Forages were harvested on 10, 22, 34 and 45 days after flowering, ensiled and kept in airtight condition. Between 45 and 49 days after ensiling, silages opened, chopped and milled green to pass through 4 mm screen. Samples were incubated in the rumen of two Holstein steers for 0, 3, 6, 9, 12, 24, 48, 72 and 96 h over eight 4 d periods. Bags at 0 h were washed in a washing machine. Variety affected DM (p<0.001: except 'a+b', p<0.01) and N (p<0.001) degradability characteristics of WCRS. Stages of maturity also affected DM (p<0.001: except 'a+b', p<0.05; 'c', p<0.08) and N (p<0.01: except 'c', p<0.05) degradability characteristics of WCRS. Interactions between variety and stages of maturity occurred in all DM (p<0.001) and N (p<0.001) degradability characteristics except (p>0.05) for DM 'b', DM 'c', DM 'a+b' nd N 'c'. Effective DM degradability was higher in grain varieties than forage varieties and degradability increased with maturity. N availability decreased only slightly with maturity. Variety was the key factor for N degradability characteristics of WCRS since variety accounted for most of the total variation for degradability characteristics. Both ME and MP content and yield were higher (p<0.001) in grain varieties, and they increased (p<0.001) with the maturity. The results clearly demonstrated that the grain type varieties contained higher ME and MP content than forage varieties, and increase in maturity increases both ME and MP content of WCRS.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.403-408
• /
• 1987

The milled rice yield of the fertilized Zeolite in the sandy loam as 542 Kg/10a was increased by 11% compared with the check plat as a standard cultivation. Significant positive correlations of that were found between grain yield/plant and panicle/total weight ratio or average weight of panicle, while lower correlations between ratio of riqened grains and grain yield/ plant. But significant negative correlations were found between 1,000-grain weight of rough and 4th. 5th internode/culm length ratio. It was reavealed that there were higher direct effects for ratio of ripened grains and spikelets/panicle affecting grain yield/plant through path analysis among the yield components. Moreover, organic dry matter production at 35 days after heading were heavier by 26% in active leaves, 19% in stem + leaf sheath, and 5% in panicle, respectively. Ratio of settled spikelets on the terminal of primary rachis-branch was 47% to total spikelets, and 37% in half-upper of that, moreover many spikelets settled on the terminal of rachis. Therefore, it was recognized that there were a dominant effect of apical glumous flower by fertilized Zeolite.