• Journal of Microbiology and Biotechnology
• /
• v.11 no.5
• /
• pp.863-869
• /
• 2001

A systematic study of microbial fuel cells comprised of alkalophilic Bacillus sp. B-31 has been carried out under various operating conditions. A significant amount of electricity was generated when redox mediators were used. Among the phenothiazine-type redox dyes tested, azure A was found to be the most effective both in maintaining a high cell voltage and for the long-term operation. The maximum efficiency was and for the long-term operation. The maximum efficiency was obtained at ca. $50^{\circ}C$ giving an open circuit voltage of 0.7V. A small change in temperature did not significantly affect the cell performance, but a rapid decrease in performance was observed below $20^{\circ}C$ and above $70^{\circ}C$. It was noticeable that fuel cell efficiency and discharge pattern depended strongly on the carbon source used in the initial culture medium. Regardless of the initial carbon sources, only glucose and trehalose were utilized as substrates. Galactose, however, was not substantially utilized except when galactose was used in the initial medium. Glucose, in particular, showed $87\%$ coulombic efficiency, which was the highest value ever reported, when Bacillus sp. was cultured in a maltose-containing medium. This study demonstrates that highly efficient microbial fuel cells can be constructed with alkalophilic microorganisms by fine-tuning the operating conditions and by carefully selecting carbon sources in the initial culture medium.

• Food Science of Animal Resources
• /
• v.39 no.5
• /
• pp.756-767
• /
• 2019

This study aimed to evaluate the effect of doneness on the microbial, nutritional, and quality characteristics of 1.5 cm- and 2.0 cm-thick pork neck steaks. Pork neck meat was obtained within 24 h after slaughtering, cut into 1.5 cm- and 2.0 cm-thick slices (n=5), packed in LLD-PE wrap, and stored at $4{\pm}2^{\circ}C$ for 7-10 days until aerobic plate counts (APC) reach 5.51-6.50 Log CFU/g. Then, the pork meat was cooked on a frying pan till it was medium-rare, medium, or well-done. The microbial inhibition rates of the 1.5 cm- and 2.0 cm-thick steak in medium-rare state were 58.26% and 51.70%, respectively, whereas it was 100% for medium-done pork steak of either thickness. The total calories of the 1.5 cm- and 2.0 cm-thick well-done pork steaks were 643.61 kcal/100 g and 675.00 kcal/100 g, respectively, which was higher than that in medium-rare and medium-done steaks. The retention ratios for Fe and K in the well-done steak were significantly lower than those in the medium and medium-rare steak of either thickness (p<0.05). The shear force of the medium-rare and medium steak did not differ, whereas that of the well-done steak was significantly higher than that of the medium-rare steak of either thickness (p<0.05). We observed that the well-done pork steak had tough texture, low mineral content, and high calories. Therefore, consumption of medium and medium-rare pork is more beneficial than that of well-done pork.

• Journal of Applied Biological Chemistry
• /
• v.58 no.3
• /
• pp.209-218
• /
• 2015

Fructooligosaccharides have been mainly produced by microbial fructosyltransferases (FTase) enzymes. The present work focuses on the optimization of medium composition and cultivation parameters affecting FTase produced by Penicillium aurantiogriseum AUMC 5605 in shake flask cultivation. FTase production was optimized in two steps using DeMeo's fractional factorial design. A 1.46-fold increase in FTase production (105.4 U/mL) was achieved using the optimized culture medium consisting of (g/L): sucrose, 600; yeast extract, 10; $K_2HPO_4$, 5; $MgSO_4{\cdot}7H_2O$, 0.5; $(NH_4)_2SO_4$, 1.0 and KCl, 0.5. The obtained results showed that the maximum FTase enzyme activity was produced at initial cultivation pH values ranging from 6.0-6.5, at agitation speed of 200 rpm and using vegetative fungal cells as inoculum. Moreover, results showed that optimization of medium composition and some cultivation parameters resulted in an increase of about 93.7% in the enzyme activity than the nonoptimized cultivation conditions after 96 h of cultivation. Additionally, maximum production and specific production rates recorded 2340 U/L/h and 102 U/L/h/g cells, respectively.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.904-911
• /
• 2008

Covalent cross-links between a number of proteins and peptides explain why transglutaminase may be widely used by food processing industries. The objective of this work was optimization of the fermentation process to produce transglutaminase from a new microbial source, the Streptomyces sp. P20. The strategy adopted to modify the usual literature media was: (1) fractional factorial design (FFD) to elucidate the key medium ingredients, (2) central composite design (CCD) to optimise the concentration of the key components. Optimization of the medium resulted in not only an 86% increase in microbial transglutaminase activity as compared to the media cited in the literature, but also a reduction in the production cost. Optimal fermentation conditions - namely temperature and agitation rate - were also studied, using CCD methodology. Usual conditions of $30^{\circ}C$ and 100 rpm were within the optimal area. All other parameters for enzyme production were experimentally proven to be optimum fermentation conditions.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.813-818
• /
• 2004

A systematic study of microbial fuel cells comprised of thermophilic Bacillus licheniformis and Bacillus thermoglucosidasius has been carried out under various operating conditions. Substantial amount of electricity was generated when a redox mediator was used. Being affected by operation temperature, the maximum efficiency was obtained at 50$^{\circ}C$ with an open circuit voltage of ca. 0.7 V. While a small change around the optimum temperature did not make much effect on the cell performance, the rapid decrease in performance was observed above 70$^{\circ}C$. It was noticeable that fuel cell efficiency and discharge pattern strongly depended on the kind of carbon sources used in the initial culture medium. In the case of B. thermoglucosidasius, glucose alone was utilized constitutively as a substrate in the microbial fuel cell irrespective of used carbons sources. When B. licheniformis was cultivated with lactose as a carbon source, best charging characteristics were recorded. Trehalose, in particular, showed 41.2% coulombic efficiency when B. thermoglucosidasius was cultured in a starch-containing medium. Relatively good repetitive operation was possible with B. thermoglucosidasius cells up to 12 cycles using glucose as a carbon source, when they were cultured with lactose as an initial carbon source. This study demonstrates that highly efficient thermophilic microbial fuel cells can be constructed by a pertinent modulation of the operating conditions and by carefully selecting carbon sources used in the initial culture medium.

• Microbiology and Biotechnology Letters
• /
• v.24 no.6
• /
• pp.749-755
• /
• 1996

From the soil collected from provincial area of South Korea, a microorganisms which have been shown good growth in the minimal poultry feces extract medium was isolated. Supplement of glucose to the poultry feces extract medium helped the complete uptake of soluble protein by microorganism. Uric acid in the poultry feces extract medium could be completely degraded during the microbial growth. Maximum cell growth (3.8 $\times$ 10$^{9}$ CFU/ml) obtained at 36 hours of incubation after inoculation. Uric acid was degraded faster in minimal medium than in the glucose complement medium. VFA (volatile fatty acid), which are known as major compounds of poultry feces odor, were almost removed from the minimal poultry feces extract medium. Glucose supplement to the minimal medium enhanced the growth of microbial cells. Addition of 4% of glucose and 4% of neopeptone to the minimal poultry feces extract medium helped the maximal growth of cells.

• Journal of Microbiology
• /
• v.44 no.6
• /
• pp.583-590
• /
• 2006

In this study, an organic solvent tolerant bacterial strain was isolated. This strain was identified as Pseudomonas sp. strain S5, and was shown to degrade BTEX (Benzene, Toluene, Ethyl-Benzene, and Xylene). Strain S5 generates an organic solvent-tolerant lipase in the late logarithmic phase of growth. Maximum lipase production was exhibited when peptone was utilized as the sole nitrogen source. Addition of any of the selected carbon sources to the medium resulted in a significant reduction of enzyme production. Lower lipase generation was noted when an inorganic nitrogen source was used as the sole nitrogen source. This bacterium hydrolyzed all tested triglycerides and the highest levels of pro-duction were observed when olive oil was used as a natural triglyceride. Basal medium containing Tween 60 enhanced lipase production to the most significant degree. The absence of magnesium ions ($Mg^{2+}$) in the basal medium was also shown to stimulate lipase production. Meanwhile, an alkaline earth metal ion, $Na^+$, was found to stimulate the production of S5 lipase.

• The Korean Journal of Food And Nutrition
• /
• v.9 no.3
• /
• pp.336-340
• /
• 1996

Rhizopus japonicus had the highest chitosan productivity compared with the chitosan productivity among Rhizopus sp. strains. To increase the productivity of microbial chitosan from Rhizopus faponicus, production medium and incubation conditions were optimized. The composition of the medium and the incubation conditions were as follows : starch 2%, yeast extract 2.5%, KH2PO4 0.05%, MgSO4 0.01%, FeSO4 0.002%, MnSO4 0.002%, ZnSO4 0.002%, CaC12 0.002%, PH 5.5, incubation temperature medium compared with chitosan productivity.

• Journal of Life Science
• /
• v.31 no.8
• /
• pp.761-770
• /
• 2021

In this study, the optimal medium composition for enhancing protease production was established by the Bacillus strain isolated from Makgeolli, a traditional fermented food, using the response surface methodology. B. amyloliquefaciens SRCM115785 was selected as the protease producer by productivity analysis and identified by 16S rRNA gene sequencing. Plackett-Burman design (PBD) was introduced to analyze the effect of each component on protease production among the 11 selected medium components. As a result, glucose, yeast extract, and beef extract were finally selected as factors for enhancing protease production. Central composite design (CCD) analysis was designed as a method to determine the optimal concentration of each component for protease production and the concentration of each medium composition for maximum protease production was predicted to glucose 6.75 g/l, yeast extract 12.42 g/l and beef extract 17.48 g/l. The suitability of the experimental model was proved using ANOVA analysis and as a result of quantitative analysis to prove this, the amount of increase was 230.47% compared to the LB medium used as a control. Through this study, the optimization of medium composition for enhancing protease production was established, and based on this, it is expected that it can be efficient use of protease as an industrial enzyme.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.152-156
• /
• 2003

Through enrichment on two nutrient agars, 57 Thermus isolates were recovered from 15 hot spring samples taken from the Rehai geothermal area, Tengchong, China. Unique growth characteristics were observed when the strains were transferred from YIM14 medium to Thermus medium. Phylogenetic analysis showed that the 16S rDNA sequences of the isolates and clones from the Rehai geothermal area farmed a monophyletic group on the phylogenetic tree. A secondary structure comparison showed that their 16S rRNAs have unique secondary structure characteristics.