• Composites Research
• /
• 제32권5호
• /
• pp.237-242
• /
• 2019

이 연구에서는 마이크로 그리드 패턴 표면을 갖는 탄소 분말이 첨가된 Poly-dimethylsiloxane (PDMS)를 사용하여 전기용량형 압력센서(Piezocapacitive Sensor)를 제작하였다. 탄소 분말과 그리드 패턴이 센서의 성능에 미치는 효과를 알아보기 위해 탄소 분말의 농도와 그리드 패턴의 밀도를 달리하여 여러 개의 센서를 제작하였다. 센서의 작동 범위와 민감도를 척도로 센서의 성능을 비교하였다.

• 열처리공학회지
• /
• 제36권6호
• /
• pp.412-421
• /
• 2023

As the demand for mechatronic systems and high performance increases in the machinery industry, the importance of improving friction characteristics is emphasized. During relative movement of objects, friction and wear occur on two surfaces in contact, and various methods are being designed to increase the lifespan and energy efficiency of machines. The energy increase effect using lubricants is a well-known method. In this study, a micro-sized rectangular grid pattern was produced by applying a precise micro-pattern photo lithography process. Rectangular grid patterns of the same shape and friction behavior according to the size of the pattern were produced in convex and concave shapes, and the tribological characteristics of each were analyzed.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.217-223
• /
• 2014

Recently, various researches and projects about electric vehicles are in progress vigorously and continuously and it is expected to penetrate rapidly with the next a few years. This deployment will cause the change of load composition rate affecting on power system planning and operations. Therefore, a new load model should be developed integrating with electric vehicle loads. In this paper, the load composition rate of residential sectors is analyzed considering the deployment of this mobility load such as electric vehicles and a new diffusion model is proposed based on the classification of the replacement patterns. Additionally, electric vehicle charging loads are basically modeled by some individual load experiments to develop new load models for smart place and some new conceptual power systems such as micro grids.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.469-470
• /
• 2007

• 한국정밀공학회지
• /
• 제25권11호
• /
• pp.45-51
• /
• 2008

Successive micro-scale V-grooves and a grid of pyramids were machined by elliptical vibration tufting (EVC) to investigate feasibility of using EVC as an alternative method of creating micro-molds to photo-lithography and electroforming, which have been commonly employed. An elliptical vibration grooving machine was developed which consists of two orthogonally-arranged piezoelectric actuators, a diamond cutting tool, and a motorized xyz stage. The micro-scale features were machined on materials of copper, duralumin, nickel, and hastelloy and it was found that EVC significantly reduces cutting resistance and prohibits generation of side burrs and rollover burrs, thus resulting in improving machining qualify of micro-molds in ail experimented workpiece materials.

• Transactions on Electrical and Electronic Materials
• /
• 제3권1호
• /
• pp.30-37
• /
• 2002

A focusing grating coupler (FGC) was not fabricated by the 'Continuous Path Control'writing strategy but by an electron-beam lithography system of more general exposure mode, which matches not only the address grid with the grating period but also an integer multiple of the address grid resolution (5 nm). To more simplify the fabrication, we are able to reduce a process step without large decrease of pattern quality by excluding a conducting material or layer such as metal (Al, Cr, Au), which are deposited on top or bottom of an e-beam resist to prevent charge build-up during e-beam exposure. A grating pitch period and an aperture feature size of the FGC designed and fabricated by e-beam lithography and reactive ion etching were ranged over 384.3 nm to 448.2 nm, and 0.5 $\times$ 0.5 mm$^2$area, respectively. This fabrication method presented will reduce processing time and improve the grating quality by means of a consideration of the address grid resolution, grating direction, pitch size and shapes when exposing. Here our investigations concentrate on the design and efficient fabrication results of the FGC for coupling from slab waveguide to a spot in free space.

• 마이크로전자및패키징학회지
• /
• 제19권1호
• /
• pp.81-87
• /
• 2012

본 논문에서는 마이크로 BGA 패키지 내외부의 마이크로 볼의 3차원 형상을 측정하는 광학 측정 시스템을 제안하고 이를 구현한다. 대부분의 시각 검사 시스템은 마이크로 볼의 복잡한 반사 특성 때문에 검사에 어려움을 겪고 있다. 정확한 형상의 측정을 위해서, 특별히 설계된 시각 센서 시스템을 제안하고, 위상이송 모아레 간섭계의 측정원리에 기반한 형상측정 알고리즘을 제안한다. 센서 시스템은 4개의 서브시스템을 보유한 패턴 투사 시스템과 영상획득 시스템으로 구성된다. 패턴 투사용 서브시스템은 공간상으로 서로 상이한 투사 방향을 가지며, 이는 측정 물체에 각기 다른 입사 방향을 가지는 패턴 조명이 투사될 수 있도록 하는 것을 목적으로 한다. 위상이송 모아레 간섭계의 구현을 위한 정밀 위상이송을 위해서, 각 서브시스템의 패턴 격자는 PZT 구동기를 이용하여 일정 간격으로 이송한다. 최종적으로 측정되는 마이크로 볼의 경면반사와 그림자 영역을 효과적으로 제거하기 위해서, 다중 패턴 투사 시스템과 영상획득 시스템을 구현하고, 이를 테스트한다. 특히, 다중 프로젝션을 이용하여 획득되는 다중 높이 정보를 효과적으로 융합하기 위하여, 베이지안 센서 융합 이론을 기반으로한 센서 융합 알고리즘이 제안된다. 제안되는 시스템의 원리검증과 성능확인을 위해, 마이크로 BGA볼과 기판 범프의 측정대상물에 대해서, 측정 반복성을 중심으로 실험이 수행되었으며, 획득된 실험 결과를 분석하고 논의한다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 춘계학술발표회 논문집
• /
• pp.151-159
• /
• 2003

This study presents method for self-calibration of the SEM(Scanning Electron Microscope) stereo image using the standard microprobe with same grid pattern and using parallel and central perspective projection equation. Result showed that parallel projection method is more suitable for standard microprobe. The maximum error of 3D coordinates acquired by this method did not exceed 5 $\mu\textrm{m}$, and DSM(Digital Surface Model) for three dimensional measurement of the rock sample was generated by the digital photogrammetry. This result can be used for quantification of micro scale change of shape and analysis of the micro morphology of rock due to weathering.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.279-283
• /
• 2009

Distributed generation(DG) of combined cooling, heat. and power(CCHP)has been gaining momentum in recent year as efficient, secure alternative for meeting increasing energy demands. This paper presents the energy performance of microturbine CCHP system equipped with an absorption chiller by modelling it in hospital building. The orders of study were as following. 1)The list and schedule of energy consumption equipment in hospital were examined such as heating and cooling machine, light etc. 2) Annual report of energy usage and monitoring data were examined as heating, cooling, DHW, lighting, etc. 3) The weather data in 2007 was used for simulation and was arranged by meteorological office data in Daejeon. 4) Reference simulation model was built by comparison of real energy consumption and simulation result by TRNSYS and ESP-r. The energy consumption pattern of building were analyzed by simulation model and energy reduction rate were calculated over the cogeneration. As a result of this study, power generation efficiency of turbine was about 30% after installing micro gas turbine and lighting energy as well as total electricity consumption can be reduced by 40%. If electricity energy and waste heat in turbine are used, 56% of heating energy and 67% of cooling energy can be reduced respectively, and total system efficiency can be increased up to 70%.

• 마이크로전자및패키징학회지
• /
• 제18권3호
• /
• pp.59-65
• /
• 2011

소형화, 박형화 및 집적화의 경향에 따라 FCBGA가 휴대폰과 같은 전자제품에 활발히 사용되고 있다. 그러나, 플립칩은 전기적 저항에 의한 열이 필연적으로 발생하며, 발생된 열은 패키지의 소형화에 따라 열의 분산 면적 감소로 인하여 발열의 증가가 나타나게 된다. 발열은 온도와 응력에 민감하게 반응하는 소자의 수명을 저해하고, 시스템에 있어 고장의 발생을 가져올 수 있다. 따라서 본 논문에서는 플립칩의 발열문제를 해결하기 위하여 Comsol 3.5a의 heat transfer module을 이용하여 FCBGA의 발열 특성을 정량적으로 분석하였다. 그리고 열 문제를 해결하기 위하여 시뮬레이션을 통한 새로운 마이크로 구조가 부착된 플립칩을 제안하였다. 또한 마이크로 패턴 구조의 형상, 높이, 간격에 대한 열 소산을 분석함으로써, 기존 플립칩에 비하여 열소산 특성이 18% 향상됨을 확인하였다.