• 한국위성정보통신학회논문지
• /
• 제8권2호
• /
• pp.44-49
• /
• 2013

LED 통신은 LED(Light Emitting Diode)에서 나오는 가시광선을 이용해 정보를 전송하는 무선통신기술로 RF(Radio Frequency) 통신의 문제점인 주파수 할당, 인체 내 유해성, 보안의 취약성, 전자기기 간 간섭 등을 극복할 수 있는 기술이다. LED를 이용하여 조명과 통신을 동시에 사용할 수 있는 융합 기술로 유비쿼터스 환경에 적합하다. 본 논문에서는 LED, PD(Photodiode) 및 MCU(Micro Controller Unit)를 이용한 LED 통신 시스템의 데이터 전송 알고리즘을 개발하였고 구현하는 과정을 소개한다.

• 반도체디스플레이기술학회지
• /
• 제22권2호
• /
• pp.1-5
• /
• 2023

In the past, display devices have undergone many changes, such as plasma TVs and LCDs, and have continued to develop. Recently, new display technologies, such as Organic Light Emitting Diode displays and Inorganic Light Emitting Diode displays, have been developed. Among them, Micro LED displays have the potential to improve performance more than LCDs and OLEDs, but a lot of effort and time are needed until the mass production technology (transfer and bonding) of Micro LED displays is developed. We have developed a new Micro LED display light source that can be produced using existing transfer and bonding process technologies to enable faster commercialization of Micro LED in the industry. This light source is TFT deposition on LED. TFT deposition on LED has the advantage of being able to produce displays using existing process technology, making early commercialization of display application products possible. In this study, we applied the Active Driving method to verify the performance of TFT deposition on LED as a display to determine its commercialization potential. Additionally, to facilitate faster application of Micro LED in the industry, we applied TFT deposition on LED to Optical Wireless Communication systems, which are widely used in application service areas such as safety/security and sensors, to verify its communication performance. The experimental results confirmed that TFT deposition on LED is not only capable of AM driving but can also be applied to OWC systems.

• 방송공학회논문지
• /
• 제21권5호
• /
• pp.816-823
• /
• 2016

본 논문은 디스플레이 휘도를 증가시키기 위하여 적색, 녹색, 청색 고휘도 Light Emitting Diode(LED)를 광원으로 사용하고, Digital Micro Device(DMD) 패널을 적용한 헤드업 디스플레이에서 세 개의 LED 광원 합성 비율과 합성에 따른 양자화 노이즈를 최소화시키는 LED 합성 비율을 연구하였고, 밝기에 영향을 미치는 녹색 LED 구동 비율과 접합 온도에 대하여 분석하였다. 이를 통하여 39%의 LED 중첩 방법을 통하여 황색과 청록색의 2차원 색을 합성하여 33.3%의 휘도 증대 효과를 얻을 수 있었다. 또한 양자화노이즈를 억제하고 영상 화질 측면에서 우수한 색정밀도를 얻을 수 있었다.

• Transactions on Electrical and Electronic Materials
• /
• 제12권6호
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• 산업과 과학
• /
• 제3권3호
• /
• pp.14-19
• /
• 2024

현재 마이크로 LED (Light Emitting Diode)는 디스플레이와 함께 조명 분야에서 관심을 받고 있으며, 높은 휘도, 빠른 동작 속도, 에너지 효율, 오랜 시간 동작 등의 장점을 가지고 있다. 스마트폰, 텔레비젼, 웨어러블 전자소자 등에서 새로운 혁신을 불러올 것으로 예측된다. 이러한 마이크로 디스플레이는 마이크로미터 크기의 LED 소자들로 이루어진 픽셀로 구현되며, 자체적으로 빛을 내는 자체발광형 디스플레이다. 주요 제조 공정으로는 결정성장, 패터닝과 식각, 칩 분리와 전사, 본딩과 배선, 패널 조립과 봉지, 검사와 품질 관리 등으로 구분할 수 있다. 최근 몇 년 동안 이 기술은 빠른 속도로 발전했으며, 기업들이 이러한 분야에의 투자를 확대하고 있다. 최신 시장 조사 결과에 의하면, 마이크로 LED 디스플레이 시장은 지속적으로 성장할 것으로 관측되고 있으며, 주요 발전 방향은 제조공정 개선, 소재 혁신, 구동 기술 발전 등으로 요약할 수 있다. 이러한 연구를 통해 상용화가 가속화되어 높은 성능과 다양한 응용 가능성으로 디스플레이 산업의 혁신을 이끌 것이라 판단된다.

• 한국지반환경공학회 논문집
• /
• 제13권2호
• /
• pp.41-47
• /
• 2012

본 연구는 담수미세조류의 일종인 클로렐라를 적색 발광다이오드를 이용하여 효율적으로 배양하기 위한 조건을 찾기 위해 수행되었다. 클로렐라 배양에 최적인 광량을 찾기 위해 광량을 조절하여 클로렐라가 포함된 반응기에 각각 조사하여 성장속도 및 셀농도를 측정하였다. 적색파장 사용 시, 광량이 증가할수록 성장속도는 광량에 비례하여 증가하였으나 셀농도는 지속적으로 감소하였다. 공기 공급에 따른 성장특성을 살펴보기 위해 반응기에 미세공기를 연속적으로 주입하였는데, 반응속도 및 셀농도는 공기를 주입하지 않은 경우에 비해 2배와 10배 증가함을 알 수 있었다. 고농도의 이산화탄소 주입의 경우에는 배지의 pH가 3이하로 저하되어 클로렐라의 성장이 감소하는 것을 알 수 있었다. 본 연구를 통해 클로렐라를 효과적으로 배양하기 위해서는 적색파장의 발광다이오드를 광원으로 사용하고 반응기에 공기를 연속적으로 주입하는 것이 효과적임을 알 수 있었다.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.340-348
• /
• 2013

In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.

• 한국전기전자재료학회논문지
• /
• 제20권12호
• /
• pp.1087-1092
• /
• 2007

We developed the 4-channel Light Medical Therapy Apparatus for Skin Injury Cure using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity and reservation. In this paper, the designed device was used to find out how high brightness LED light affects the skin injury of SD-Rat(Sprague-Dawley Rat). In the experiment, $1\;cm^2$ wounds on the skin injury of SD-Rat(Sprague-Dawley Rat) were made. Light irradiation group and none light irradiation group divided, each group was irradiated one hour a day for 14 days. In result, compared with none light irradiation group, the lower incidence of inflammation and faster recovery was shown in light irradiation group.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.47-52
• /
• 2019

Micro-LEDs show lower efficiencies compared to general LEDs having large areas. Simulations were carried out using ray-tracing software to investigate the change in light extraction efficiency and light distribution according to chip-size of blue flip-chip micro-LEDs (FC ${\mu}-LEDs$). After fixing the height of the square FC ${\mu}-LED$ chip at $158{\mu}m$, the length of one side was varied, with dimensions of 2, 5, 10, 30, 50, 100, 300, and $500{\mu}m$. The highest light-extraction efficiency was obtained at $10{\mu}m$, beyond which the efficiency decreased as the chip-size increased. The chip size-dependence of the FC ${\mu}-LEDs$ both without the patterned sapphire substrate, as well as vertical FC ${\mu}-LEDs$, were analyzed.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.288-301
• /
• 2021

The purpose of this study was to verify the degree of visibility of FOLED (fiber optic light-emitting diode) materials applied to safety-enhancing clothes of micro-mobility users during the day and night by conducting an empirical test targeting 50 people in their teens, 20's, 30's, 40's, and 50's or older. First, the results of the visibility test at 10 m-intervals from 10 to 70 m based on the clothes sample showed that the light detection of FOLED material was very good without daytime or night-time distinction. Second, the results of directional sign detection of FOLED were confirmed to be very high without any daytime or night. Third, the results of identifying a pictogram design showed that the distance was shorter than that of light detection or directional indication. However, the FOLED pictogram design could be confirmed at a distance of 50 m or less. Therefore, if a clothes product using FOLED material is worn and micro-mobility is used, the experimental results indicate that safety will be sufficiently secured due to the excellent visibility.