Browse > Article
http://dx.doi.org/10.7736/KSPE.2013.30.3.340

Development of Projection Scanbeam-SLA using Liquid Crystal Display and Visible Light Emitting Diode  

Yoon, Su Hyun (School of Mechanical Engineering, Pusan National Univ.)
Park, In Baek (School of Mechanical Engineering, Pusan National Univ.)
Kim, Min Sub (School of Mechanical Engineering, Pusan National Univ.)
Jo, Kwang Ho (School of Mechanical Engineering, Pusan National Univ.)
Lee, Seok Hee (School of Mechanical Engineering, Pusan National Univ.)
Publication Information
Abstract
In Projection Stereolithography Apparatus (PSLA), Digital Micromirror Device (DMD) and Liquid Crystal Display (LCD) are used as a beam pattern generator. The DMD shows high resolution, but it is mostly applied in micro stereolithography due to high cost and fabricable area. In LCD, the size of pattern beam is freely controlled due to various panel sizes. The LCD, however, has some limitations such as short life time by the high power light source, non-uniform light intensity of pattern beam and low transmittance of UV-light. To solve these problems in LCD-based PSLA, a Scanbeam-SLA with LCD of 19 inches and visible LED-array is developed. In this system, the light module works like a scanner for uniform illumination. The system configuration, working principle and fabrication examples are addressed in this study.
Keywords
Stereolithography Apparatus (SLA); Liquid Crystal Device (LCD); Visible Light Emitting Diode (LED) Array;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Zhou, C., Chen, Y., and Waltz, R. A., "Optimized Mask Image projection for solid freeform fabrication," Journal of Manufacturing Science and Engineering, Vol. 131, No. 6, Paper No. 061004, 2009.
2 Varadan, V. K., Jiang, X., and Varadan, V. V., "Microstereolithography and other fabrication Techniques for 3D MEMS," John Wiley & Sons, pp. 103-138, 2001.
3 Azari, A. and Nikzad, S., "The evolution of rapid prototyping in dentistry: a review," Rapid Prototyping Journal, Vol. 15, No. 3, pp. 216-225, 2009.   DOI   ScienceOn
4 Kruth, J. P., "Material Incress Manufacturing by Rapid Prototyping Techniques," Annals of the CIRP, Vol. 40, No. 2, pp. 603-614, 1991.   DOI   ScienceOn
5 Ashley, S., "Rapid prototyping is coming of age," Mechanical Engineering, Vol. 117, pp. 62-68, 1995.
6 Hilton, P., "Making the leap to rapid tool making," Mechanical Engineering, Vol. 117, pp. 75-76, 1995.
7 Wohlers, T., "Wohlers Report 2010: Additive Manufacturing State of the Industry Annual Worldwide Progress Report," Wohlers Associates, 2010.
8 Park, I. B., Choi, J. W., Ha, Y. M., and Lee, S. H., "Multiple Fabrications of Sacrificial Layers to Enhance the Dimensional Accuracy of Microstructures in Maskless Projection Microstereolithography," Int. J. Precis. Eng. Manuf., Vol. 10, No. 1, pp. 91-98, 2009.
9 Park, I. B., Ha, Y. M., and Lee, S. H., "Dithering method for improving the surface quality of a microstructure in projection microstereolithography," The International Journal of Advanced Manufacturing Technology, Vol. 52, pp. 545-553, 2011.   DOI
10 Hayashi, T., Shibata, T., Kawashima, T., Makino, E., Mineta, T., and Masuzawa, T., "Photolithography system with liquid crystal display as active gray-tone mask for 3D structuring of photoresist," Sensors and Actuators A: Physical, Vol. 144, pp. 381-388, 2008.   DOI   ScienceOn
11 Bertsch, A., Zissi, S., Jézéquel, J. Y., Corbel, S., and André, J. C., "Microstereolithography using a liquid crystal display as dynamic mask generator," Microsystem Technologies, Vol. 3, pp. 42-47, 1997.   DOI   ScienceOn
12 Luo, R. C. and Tzou, J. H., "Development of an LCD-Photomask-Based Desktop Manufacturing System," IEEE Transactions on Industrial Electronics, Vol. 55, No. 10, pp. 3715-3723, 2008.   DOI   ScienceOn
13 Peng, Q., Guo, Y., Liu, S., and Cui, Z., "Real-time gray-scale photolithography for fabrication of continuous microstructure," Optics Letters, Vol. 27, No. 19, pp. 1720-1722, 2002.   DOI   ScienceOn