• 한국세라믹학회지
• /
• 제31권12호
• /
• pp.1577-1587
• /
• 1994

TiO2 thin films with the substitution of oxygen with nitrogen were deposited on silicon substrate by metalorganic chemical vapor deposition (MOCVD) using Ti(OCH(CH3)2)4 (titanium tetraisopropoxide, TTIP) and N2O as source materials. X-ray diffraction (XRD) results indicated that the crystal structure of the deposited thin films was anatase TiO2 with only (101) plane observed at the deposition temperatures of 36$0^{\circ}C$ and 38$0^{\circ}C$, and with (101) and (200) plane at above 40$0^{\circ}C$. Raman spectroscopic results indicated that the crystal structure was anatase TiO2 in accordance with the XRD results without any rutile, fcc TiN, or hcp TiN structure. No fundamental difference was observed with temperature increase, but the peak intensity at 194.5 cm-1 increased with strong intensity at 143.0 cm-1 for all samples. The crystalline size of the films varied from 49.2 nm to 63.9 nm with increasing temperature as determined by slow-scan XRD experiments. The refractive index of the films increased from 2.40 to 2.55 as temperature increased. X-ray photoelectron spectroscopy (XPS) study showed only Ti 2s, Ti 2p, C 1s, O 1s and O 2s peaks at the surface of the film. The composition of the surface was estimated to be TiO1.98 from the quatitative analysis. In the bulk of the film Ti 2s, Ti 2p, O 1s, O 2s, N 1s and N 2s were detected, and Ti-N bonding was observed due to the substitution of oxygen with nitrogen. A satellite structure was observed in the Ti 2p due to the Ti-N bonding, and the composition of titanium nitride was determined to be about TiN1.0 from the position of the binding energy of Ti-N 2p3/2 and the quatitative analysis. The spectrum of Ti 2p energy level could be the sum of a 4, 5, or 6 Gaussian curve reconstruction, and the case of the sum of the 6 Gaussian curve reconstruction was physically most meaningful. From the results of Auger electron spectroscopy (AES), it was known that the composition was not varied significantly throughout the whole thickness of the film, and silicon oxide was not observed at the interface between the film and the substrate. The composition of the film was possible (TiO2)1-x.(TiN)x or TiO2-2xNx and in this experimental condition x was found to be about 0.21-0.16.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1196-1204
• /
• 1999

(hfac)Cu(vtmos) [$C_{10}H_{13}O_{5}CuF_{6}$Si: 1,1,1,5,5,5-hexafluoro-2,4- pentadionato (vinyltrimethoxysilane) copper (I)] 구리원을 액체분사법으로 공급하여 반응성 스퍼터 증착된 PVD-TiN과 급속열처리 변환된 RTP-TiN 기판상에 구리를 유기금속 화학증착법으로 성장시키고, 증착조건과 기판 종류가 박막의 증착율, 결정구조 및 미세조직, 전기비저항 등에 미치는 영향을 분석하였다. 구리원 유량 0.2ccm에서 증착반응은 Ar 유량 200sccm까지 물질전달 지배과정과 전압 1.0Torr 이상에서 기화기에서의 공급율속을 보였다. 전압 0.6Torr일 때 활성화에너지는 155~225$^{\circ}C$의 표면반응 지배영역에서 12.7~14.1kcal/mol의 값을 나타내었으며, 225$^{\circ}C$ 이상의 기판온도에서는 $H_2$ 첨가에 따른 증착율 개선이 간응한 것으로 판단되었다. 증착층은 기판온도 증가에 따라 3차원 island 양식으로 성장하였으며, 증착초기 구리 핵생성밀도가 큰 RTP-TiN상 증착층이 PVD-TiN상보다 현저한 (111) 우선방위와 낮은 전기비저항값을 나타내었다. 구리박막의 전기비저항은 결정립간 연결성이 양호한 165$^{\circ}C$에서 가장 낮았으며, 증착온도에 따른 박막 미세구조 변화로 인해 그 거동은 3개의 영역으로 구분되어 나타났다.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.708-710
• /
• 2003

One-dimensional array of InAs quantum dots (QDs) have been grown on V-grooved GaAs substrates by low-pressure metalorganic chemical vapor deposition. Atomic force microscope images show that InAs QDs are aligned in one-dimensional rows along the ［011］oriented bottom of V-grooves and no QDs are formed on the sidewalls and the surface of mesa top. Capability to grow one-dimensional InAs QDs array would feasible for the single electron tunneling devices and other novel quantum-confined devices.

• 한국재료학회지
• /
• 제13권11호
• /
• pp.717-720
• /
• 2003

Heavily $p^{ ＋}$-typed ($10^{20}$ $cm^{-3}$ ) GaAs epilayers have been grown on high-index GaAs substrates with various crystallographic orientations from (100) to (111)A by a low-pressure metalorganic chemical vapor deposition. Carbon (C) tetrabromide (CBr$_4$) was used as a C source. At moderate growth temperatures and high V/III ratios, the hole concentration of C-doped GaAs epilayers shows the crystallographic orientation dependence. The bonding strength of As sites on a growing surface plays an important role in the C incorporation into the high-index GaAs substrates.

• 한국전기전자재료학회논문지
• /
• 제15권3호
• /
• pp.208-213
• /
• 2002

We present the temperature and excitation power density dependence of the photoluminescence from carbon-doped GaAs epilayers grown on GaAs (311)A substrate by atmospheric pressure metalorganic chemical vapor deposition. The measured temperature dependence of the PL peak energy is well expressed by an empirical formula proposed by Varshni. The thermal quenching mechanism of the intensity of 16 K luminescence peak at 1.480 eV is described with the dominant activation energy of 27$\pm$2 meV. The activation energy shows an evidence that the emission band involves the carbon acceptor in the recombination process.

• 한국재료학회지
• /
• 제9권4호
• /
• pp.368-372
• /
• 1999

The suggested electrode structure of MOCVD-Pt/sputtered-Ru/polysilicon has an excellent adhesion with increasing annealing temperatures and shows a stable electrode structure up to $600^{\circ}C$. However, the ruthenium used for barrier layer increased the roughness of platinum bottom electrodes because ruthenium diffused through the Pt bottom electrode and reacted with oxygen during the annealing above $700^{\circ}C$. The surface roughness increased the resistivity of Pt bottom electrodes. The resistivity of samples annealed at $600^{\circ}C$ was about $13\mu$Ω.cm. The electrode structure was possible to apply for ferroelectric thin film integration of semiconductor memory devices.

• 대한전자공학회논문지
• /
• 제27권5호
• /
• pp.716-723
• /
• 1990

Transmission electron microscopy (TEM) and anger electron microscopy(AES) studies of GaAs/AlxGa1-xAs(x=0.58) quantum wells grown by low pressure metalorganic chemical vapor deposition(LP-MOCVD) are carried out. Isolated quantum well structure having the well width as small as 15 \ulcornerand multiquantum well structure, which consisted of 51 alternating layers with each thickness of 10\ulcorner were suscessfully grown. TEM analyses have shown that their interfaces were almost completely coherent without any structural disorder, alloy clustering and crystal defect. AES depth resolution have shown the compositional periodicity of superlattice structure.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.83-85
• /
• 2004

MOCVD(metalorganic chemical vapor deposition)에 의해 성장된 InGaAs/AlGaAs 물질을 이용하여 V-형 양자선 (V-groove quantum-wire) 어레이(array) 구조에서 이득 결합(gain-coupling)에 의한 분포 광귀환(distributed optical feedback) 특성을 조사하였다. 분포 귀환형 (distributed feedback, DFB) 구조를 제작하는 동안 격자 재성장(grating overgrowth)을 피하기 위하여, 새롭게 개발된 constant MOCVD 성장 방법을 적용하였고, Bragg 파장에서 DFB 방향으로 광귀환의 결과인 스펙트럼의 이득 이방성(gain asymmetry)을 실험적으로 관찰하였다.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.864-868
• /
• 2007

Effect of high-temperature annealing on morphology of fully coherent self-assembled InAs quantum dots' grown on Si (100) substrates at $450^{\circ}C$ by atmospheric pressure metalorganic chemical vapor deposition(APMOCVD) was investigated by atomic force microscopy(AFM). When the dots were annealed at 500 - 600$^{\circ}C$ for 15 sec - 60 min, there was no appreciable change in the dot density but the heights of the dots increased along with the reduction in the diameters. In segregation from the InAs quantum dots and/or from the 2-dimensional InAs wetting layer which was not transformed into quantum dots looked responsible for this change in the dot size. However the change rates remained almost same regardless of annealing time and temperature, which may indicate that the morphological change due to thermal annealing is done instantly when the dots are exposed to high temperature annealing.

• 한국전기전자재료학회논문지
• /
• 제14권12호
• /
• pp.1027-1031
• /
• 2001

A new constant growth technique to conserve an initial grating height of V-groove AlGaAs/InGaAs quantum nanostructures above 1.0 $\mu\textrm{m}$ thickness has been successfully embodied on submicron gratings using low pressure metalorganic chemical vapor deposition. A GaAs buffer prior to an AlGaAs barrier layer on submicron gratings plays an important role in overcoming mass transport effects and improving the uniformity of gratings. Transmission electron microscopy (TEM) image shows that high-density V-groove InGaAs quantum wires (QWRs) are well confined at the bottom of gratings. The photoluminescence (PL) peak of the InGaAs QWRs is observed in the temperature range from 10 to 280 K with a relatively narrow full width at half maximum less than 40 meV at room temperature PL. The constant growth technique is an important step to realize complex optoelectronic devices such as one-step grown distributed feedback lasers and two-dimensional photonic crystal.