• 대한화학회지
• /
• 제63권2호
• /
• pp.94-101
• /
• 2019

Nb, Mo-doped and Nb/Mo-codoped $VO_2(M)$ nanocrystallites with various doping levels were synthesized for the first time by a hydrothermal and post thermal transformation method. The reversible phase transition characteristics of those doped $VO_2(M)$ was comparatively investigated. Nb-doping of $VO_2(M)$ by this method resulted in a very efficient lowering of the transition temperature ($T_c$) with a rate of $-16.7^{\circ}C/at.%$ that is comparable to W-doping, while Mo-doping did not give a serious reduction of $T_c$ with only a rate of $-5.1^{\circ}C/at.%$. Nb/Mo-codoping gave a similar result to Nb-doping without a noticeable difference. The thin films of Nb-doped and Nb/Mo-codoped $VO_2(M)$ with a thickness of ca. 120 nm were prepared by a wet-coating of the nanoparticle-dispersed solutions. Those films showed a good thermochromic modulation of near infrared radiation with 30-35% for Nb-doped $VO_2(M)$ and 37-40% for Nb/Mo-codoped ones. Nb/Mo-codoped $VO_2(M)$ film showed slightly enhanced thermochromic performance compared with Nb-doped $VO_2(M)$ film.

• 한국재료학회지
• /
• 제28권12호
• /
• pp.685-690
• /
• 2018

In this study, a multifunctional ophthalmic lens material with an electromagnetic shielding effect, high oxygen permeability, and high water content is tested, and its applicability is evaluated. Metal oxide nanoparticles are applied to the ophthalmic lens material for vision correction to shield harmful electromagnetic waves; the pyridine group is used to improve the antibacterial effect; and silicone substituted with urethane and acrylate is employed to increase the oxygen permeability and water content. In addition, multifunctional tinted ophthalmic lens materials are studied using lens materials with an excellent antibacterial effect (2,6-difluoropyridine, 2-fluoro-4-pyridinecarboxylic acid) and functional (UV protection, high wettability) lens materials (2,4-dihydroxy benzophenone, 2-hydroxy-4-(methacryloyloxy)benzophenone). To solve problems such as air bubbles generated during the polymerization process for the manufacturing and turbidity of the lens surface, polymerization conditions in which the defect rate is minimized are determined. The results show that the polymerization temperature and time are most appropriate when they are $110^{\circ}C$ and 40 minutes, respectively. The optimum injection amount of the polymerization solution is 350 ms. The turbid phenomenon that appears in lens processing is improved by 10 to 95 % according to the test time and conditions.

• 한국재료학회지
• /
• 제29권6호
• /
• pp.371-377
• /
• 2019

A flexible piezoelectric energy harvester(f-PEH) that converts tiny mechanical and vibrational energy resources into electric signals without any restraints is drawing attention as a self-powered source to operate flexible electronic systems. In particular, the nanocomposites-based f-PEHs fabricated by a simple and low-cost spin-coating method show a mechanically stable and high output performance compared to only piezoelectric polymers or perovskite thin films. Here, the non-piezoelectric polymer matrix of the nanocomposite-based f-PEH is replaced by a P(VDF-TrFE) piezoelectric polymer to improve the output performance generated from the f-PEH. The piezoelectric hybrid nanocomposite is produced by distributing the perovskite PZT nanoparticles inside the piezoelectric elastomer; subsequently, the piezoelectric hybrid material is spin-coated onto a thin metal substrate to achieve a nanocomposite-based f-PEH. A fabricated energy device after a two-step poling process shows a maximum output voltage of 9.4 V and a current of 160 nA under repeated mechanical bending. Finite element analysis(FEA) simulation results support the experimental results.

• 한국산업융합학회 논문집
• /
• 제25권6_2호
• /
• pp.1037-1045
• /
• 2022

In this study, nanoscale Al₂O3 ceramic particles were used due its exceptionally high hardness characteristics, chemical stability, and wear resistance properties. These nanoparticles will be used to investigate the optimal process conditions for the electro co-deposition of the Ni-Al₂O₃ composite coatings. A Watts bath electrolytic solution of a controlled composition along with a fixed agitation speed was used for this study. Whereas the current density, the pH value, temperature and concentration of the nano Al₂O₃ particles of the electrolyte were designated as the manipulative variables. The experimental design method was based on the orthogonal array to find the optimum processing parameters for the electro co-deposition of Ni-Al₂O₃ composite coatings. The result of confirmation experimental based on the optimal processing condition through the analysis of variance ; EDX analysis found that the ratio of alumina increased to 8.65 wt.% and subsequently the overall hardness increased to 983 Hv. Specially, alumina were evenly distributed on Nickel matrix and particles were embedded more firmly and finely in Nickel matrix.

• Composites Research
• /
• 제37권2호
• /
• pp.94-100
• /
• 2024

In order to evade the premature failure of super duplex stainless steels (SDSSs) in some harsh environments, the increase of their mechanical properties is a promising approach. In this study, based on the laser powder bed fusion (LPBF) technique, SDSS matrix composites without post heat treatment were fabricated by using the powder mixture of SDSSs, super austenitic stainless steels (SASSs) and micron-sized TiC particles. Many in-situ TiC_xN_y nanoparticles were found to be formed by using micron-sized TiC particles in as-built composites, and both fine ferrite and austenite grains were generated. The as-built composites exhibited an excellent combination of high ultimate tensile strength (UTS) (~1066 MPa) and good uniform elongation (UE) (~15.6%), showing a better mechanical property compared with other reported LPBF-fabricated SDSSs, which was mainly attributed to the fine grain, Orowan and dislocation strengthening mechanisms. In particular, the successful fabrication of SDSS matrix composites can set the stage for producing high-performance metallic parts via LPBF technique.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.15-26
• /
• 2017

오염수로부터 자성분리가 가능하며, 방사성 세슘을 효율적으로 제거하기 위한 코발트 페로시아나이드(cobalt ferrocyanide, CoFC) 혹은 니켈 페로시아나이드(nickel ferrocyanide, NiFC)가 도입된 자성입자 흡착제를 제조하였다. $Fe_3O_4$ 나노입자는 공침법을 이용해 제조하였고, $Co^{2+}$와 $Ni^{2+}$ 이온을 입자 표면에 도입시키기 위해 금속이온과 금속 배위결합(metalcoordination)을 하는 카르복실기를 포함한 숙신산(succinic acid, SA)을 자성나노입자(magnetic nanoparticles, MNPs) 표면에 코팅하였다. CoFC와 NiFC는 자성나노입자 표면에 도입된 $Co^{2+}$ 혹은 $Ni^{2+}$ 이온이 hexacynoferrate와 결합하여 형성된다. 제조된 CoFC-MNPs 그리고 NiFC-MNPs는 각각 $43.2emu{\cdot}g^{-1}$, $47.7emu{\cdot}g^{-1}$의 우수한 포화자화 값을 보여주었다. X-선 회절분석(XRD), 퓨리에 변환 적외선 분광분석(FT-IR), 나노입자 입도 분석기(DLS), 투과전자현미경(TEM) 등의 분석을 통해 흡착제의 물성을 파악하고, 세슘에 대한 흡착 성능을 알아보았다. 흡착실험을 평가하기 위해 Langmuir/Freundlich 등온흡착식을 이용해 실험 결과 값을 곡선맞춤 하였고, CoFC-MNPs와 NiFC-MNPs의 최대흡착량($q_m$)은 각각 $15.63mg{\cdot}g^{-1}$, $12.11mg{\cdot}g^{-1}$이다. CoFC-MNPs와 NiFC-MNPs는 방사성 세슘에 대해서도 최저 99.09%의 제거율을 가지며, 경쟁이온의 존재에도 방사성 세슘만을 선택적으로 흡착한다.

• 청정기술
• /
• 제30권2호
• /
• pp.145-156
• /
• 2024

탄소는 비표면적이 매우 크고 우수한 화학적 안정성을 지녀 촉매 지지체로 사용한 연구들이 활발히 진행되고 있다. 탄소를 지지체로 사용하는데 있어 전처리 과정은 필수적이다. 전처리를 통해 금속 입자의 성장을 제어해 안정화하고 지지체와 금속 입자 간 결합력을 향상시킬 수 있다. 본 연구에서는 표면 개질을 위해 탄소의 전처리를 실시하였으며 이를 촉매 지지체로 사용해 5 wt% Pd/C 촉매를 합성하였다. 제조된 촉매의 활성은 페놀 수소화 반응을 통해 평가되었다. 탄소 전처리 시 일반적으로 사용되는 질산과 비교하고자 유기산을 사용해 탄소 전처리를 진행하였고 이를 지지체로 사용해 촉매를 제조하였다. 글루콘산으로 처리된 촉매는 94.93%의 전환율과 92.76%의 사이클로헥사논 선택도를 나타내 질산으로 처리된 촉매보다 우수한 활성을 나타냈다. 따라서 유기산을 이용한 탄소의 전처리가 무기산 처리의 단점을 개선하는 것뿐만 아니라 촉매 성능 개선에 도움을 줄 수 있을 것으로 기대된다.

• 환경생물
• /
• 제39권4호
• /
• pp.550-558
• /
• 2021

본 연구에서는 방사성동위원소 추적자 실험을 통해서 산화아연 또는 두 종류의 은나노물질로 오염시킨 토양에서 지렁이(Eisenia fetida)의 금속축적과 제거율을 비교하였고, 이들을 이온상의 Ag와 Zn으로 처리한 대조구와 비교하였다. 추가적으로 토양의 금속을 다단계추출법(sequential extraction method)을 이용하여 금속의 결합 형태로부터 생물이용도(bioavailability)를 예측하고 실제 생물축적(BAF, bioaccumulation factor)과 비교하였다. ZnO 처리구의 BAF (0.06)는 아연이온 처리구 BAF (1.86)보다 31배 낮았는데, 이는 토양에서 ZnO의 생물전이가 매우 낮음을 제시해 준다. 한편, 은의 BAF는 금속의 오염 형태에에 무관하게 0.11~0.17의 범위를 보였다. 다단계추출법을 통해서 아연이온 처리구의 아연은 토양에 비교적 약한 결합을 하는 형태(mobile fraction)에 35% 분포하여 아연이온처리구 값(<20%)보다 높았고, 이는 전자의 더 높은 BAF와 일치한다. 하지만, ZnO 처리구의 다단계추출은 생물이용도나 BAF를 잘 예측하지 못했으며 이는 ZnO가 토양에서 아연이온과 지화학적으로 다른 거동을 하기 때문으로 추정된다. 지렁이 체내에 축적된 은의 제거율(3.2~3.8% d^-1)은 아연의 제거율(1.2~1.7% d^-1)보다 2~3배 더 높았다.

• 전기화학회지
• /
• 제11권3호
• /
• pp.176-183
• /
• 2008

본 연구에서는 8족 금속 원소인 osmium을 중심금속으로 4가지의 착물을 합성하였다. 합성한 착물은 ${[Os(bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dme-bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dmo-bpy)}_2{(ap-im)Cl]}^{+/2+}$, ${[Os(dcl-bpy)}_2{(ap-im)Cl]}^{+/2+}$이다. 합성된 착물을 순환전압전류법을 포함한 다양한 전기화학분석방법을 이용하여 전기적 성질을 조사하여 작용기에 따른 전위의 변화를 다음의 전위구간에서 $E_p$:$-0.06\;V{\sim}0.313\;V$ vs. Ag/AgCl 확인하였다. 합성한 화합물을 전기적 흡착방법으로 고정된 금나노입자(gold nano-particles)를 전극 위에 자기조립방식으로 고정화를 시켰다. 당과 당 분해효소(Glucose Oxidase, GOx)에 의한 촉매반응의 전류를 확인하였고, glucose농도에 따른 변화하는 전류의 양도 확인하였다. 마지막으로 고정된 4가지의 osmium complex는 서로 다른 전위로 인하여 촉매전류의 양이 달라지는 것을 알 수 있었고, 이로 인해 redox complex의 전위가 촉매반응에 미치는 영향을 확인 할 수 있었다.

• 한국재료학회지
• /
• 제22권2호
• /
• pp.78-81
• /
• 2012

$Y_2O_3$ nanomaterials have been widely used in transparent ceramics and luminescent devices. Recently, many studies have focused on controlling the size and morphology of $Y_2O_3$ in order to obtain better material performance. $Y_2O_3$ powders were prepared under a modified solvothermal condition involving precipitation from metal nitrates with aqueous ammonium hydroxide. The powders were obtained at temperatures at $250^{\circ}C$ after a 6h process. The properties of the $Y_2O_3$ powders were studied as a function of the solvent ratio. The synthesis of $Y_2O_3$ crystalline particles is possible under a modified solvothermal condition in a water/ethylene glycol solution. Solvothermal processing condition parameters including the pH, reaction temperature and solvent ratio, have significant effects on the formation, phase component, morphology and particle size of yttria powders. Ethylene glycol is a versatile, widely used, inexpensive, and safe capping organic molecule for uniform nanoparticles besides as a solvent. The characterization of the synthesized Y2O3 powders were studied by XRD, SEM (FE-SEM) and TG/DSC. An X-ray diffraction analysis of the synthesized powders indicated the formation of the $Y_2O_3$ cubic structure upon calcination. The average crystalline sizes and distribution of the synthesized $Y_2O_3$ powders was less than 2 um and broad, respectively. The synthesized particles were spherical and hexagonal in shape. The morphology of the synthesized powders changed with the water and ethylene glycol ratio. The average size and shape of the synthesized particles could be controlled by adjusting the solvent ratio.