• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.91-100
• /
• 2016

In FPGA-based real-time image warping systems, image caches are utilized for fast readout of image pixel data and reduction of memory access rate. However, a cache algorithm for a general computer system is not suitable for real-time performance because of time delays from cache misses and on-line computation complexity. In this paper, a simple image cache algorithm is presented for a FPGA-based real-time image warping system. Considering that pixel data access sequence is determined from the 2D coordinate transformation and repeated identically at every image frame, a cache load sequence is off-line programmed to guarantee no cache miss condition, and reduced on-line computation results in a simple cache controller. An overall system structure using a FPGA is presented, and experimental results are provided to show accuracy and validity of the proposed cache algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.11C
• /
• pp.662-672
• /
• 2011

This paper presents a new edge-preserving algorithm and its VLSI architecture for block artifact reduction. Unlike previous approaches using block classification, our algorithm utilizes pixel classification to categorize each pixel into one of two classes, namely smooth region and edge region, which are described by the edge-preserving maps. Based on these maps, a two-step adaptive filter which includes offset filtering and edge-preserving filtering is used to remove block artifacts. A pipelined VLSI architecture of the proposed deblocking algorithm for HD video processing is also presented in this paper. A memory-reduced architecture for a block buffer is used to optimize memory usage. The architecture of the proposed deblocking filter is prototyped on FPGA Cyclone II, and then we estimated performance when the filter is synthesized on ANAM 0.25 ${\mu}m$ CMOS cell library using Synopsys Design Compiler. Our experimental results show that our proposed algorithm effectively reduces block artifacts while preserving the details.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.11
• /
• pp.18-26
• /
• 2011

This paper describes a multi-mode LDPC decoder which supports three block lengths(648, 1296, 1944) and four code rates(1/2, 2/3, 3/4, 5/6) of IEEE 802.11n wireless LAN standard. To minimize hardware complexity, it adopts a block-serial (partially parallel) architecture based on the layered decoding scheme. A novel memory reduction technique devised using the min-sum decoding algorithm reduces the size of check-node memory by 47% as compared to conventional method. From fixed-point modeling and Matlab simulations for various bit-widths, decoding performance and optimal hardware parameters such as fixed-point bit-width are analyzed. The designed LDPC decoder is verified by FPGA implementation, and synthesized with a 0.18-${\mu}m$ CMOS cell library. It has 219,100 gates and 45,036 bits RAM, and the estimated throughput is about 164~212 Mbps at 50 MHz@2.5v.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5149-5167
• /
• 2017

Reducing energy consumption in a wireless video sensor network (WVSN) is a crucial problem because of the high video data volume and severe energy constraints of battery-powered WVSN nodes. In this paper, we present an adaptive dynamic resizing approach for a SRAM communication buffer in a WVSN node in order to reduce the energy consumption and thereby, to maximize the lifetime of the WVSN nodes. To reduce the power consumption of the communication part, which is typically the most energy-consuming component in the WVSN nodes, the radio needs to remain turned off during the data buffer-filling period as well as idle period. As the radio ON/OFF transition incurs extra energy consumption, we need to reduce the ON/OFF transition frequency, which requires a large-sized buffer. However, a large-sized SRAM buffer results in more energy consumption because SRAM power consumption is proportional to the memory size. We can dynamically adjust any active buffer memory size by utilizing a power-gating technique to reflect the optimal control on the buffer size. This paper aims at finding the optimal buffer size, based on the trade-off between the respective energy consumption ratios of the communication buffer and the radio part, respectively. We derive a formula showing the relationship between control variables, including active buffer size and total energy consumption, to mathematically determine the optimal buffer size for any given conditions to minimize total energy consumption. Simulation results show that the overall energy reduction, using our approach, is up to 40.48% (26.96% on average) compared to the conventional wireless communication scheme. In addition, the lifetime of the WVSN node has been extended by 22.17% on average, compared to the existing approaches.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.10
• /
• pp.467-473
• /
• 2007

Power-aware design is one of the most important areas to be emphasized in multimedia mobile systems, in which data transfers dominate the power consumption. In this paper, we propose a new architecture for motion compensation (MC) of H.264/AVC with power reduction by decreasing the data transfers. For this purpose, a reconfigurable microarchitecture based on data type is proposed for interpolation and it is mapped onto the dedicated motion compensation IP (intellectual property) effectively without sacrificing the performance or the system latency. The original quarter-pel interpolation equation that consists of one or two half-pel interpolations and one averaging operation is designed to have different execution control modes, which result in decreasing memory accesses greatly and maintaining the system efficiency. The simulation result shows that the proposed method could reduce up to 87% of power consumption caused by data transfers over the conventional method in MC module.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.2
• /
• pp.85-94
• /
• 2005

It has been reported and verified in many design experiences that a judicious utilization of the page and burst access modes supported by DRAMs contributes a great reduction in not only the DRAM access latency but also DRAM's energy consumption. Recently, researchers showed that a careful arrangement of data variables in memory directly leads to a maximum utilization of the page and burst access modes for the variable accesses, but unfortunately, found that the problems are not tractable, consequently, resorting to simple (e.g., greedy) heuristic solutions to the problems. In this parer, to improve the quality of existing solutions, we propose 0-1 ILP-based techniques which produce optimal or near-optimal solution depending on the formulation parameters. It is shown that the proposed techniques use on average 32.2%, l5.1% and 3.5% more page accesses, and 84.0%, 113.5% and 10.1% more burst accesses compared to OFU (the order of first use) and the technique in [l, 2] and the technique in [3], respectively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.4 s.334
• /
• pp.9-18
• /
• 2005

This paper proposes the novel synchronous segmented bus architecture that has the pipeline bus architecture based on OCP(open core protocol) and the memory-oriented bus for MPEG system. The proposed architecture has bus architectures that support the memory interface for image data processing of MPEG system. Also it has the segmented hi-directional multiple bus architecture for multitasking processing by using multi -masters/multi - slave. In the scheme address of masters and slaves are fixed so that they are arranged for the location of IP cores according to operational characteristics of the system for efficient data processing. Also the bus architecture adopts synchronous segmented bus architecture for reuse of IP's and architecture or developed chips. This feature is suitable to the high performance and low power multimedia SoC systum by inherent characteristics of multitasking operation and segmented bus. Proposed bus architecture can have up to 3.7 times improvement in the effective bandwidth md up to 4 times reduction in the communication latency.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.1
• /
• pp.101-108
• /
• 2000

The data prefetching scheme is an effective technique to reduce the main memory access latency by exploiting the overlap of processor computations with data accesses. However, if the prefetched data replicate the useful existing data in the cache memory and they are not being used in computations. performances of programs are aggravated. This phenomenon results from the lack of correct predictions for data being used in the future. When parallel programs exploit the data arrays for computations, the grain size is useful information for data prefetching scheme because it implies the range of data using in computations. Based on this information, we suggest a new data prefetching scheme exploited by the grain size of the parallel program. Simulation results show that the suggested prefetching scheme improves the performance of the simulated parallel programs due to the reduction of bus transactions as well as useful prefetching operations.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.739-752
• /
• 2020

This paper aims to investigate cyclic plasticity of a new type of high-performance austenitic stainless steel with both high strength and high ductility. The new stainless steel termed as QN1803 has high nitrogen and low nickel, which leads to reduction of cost ranging from 15% to 20%. Another virtue of the new material is its high initial yield strength and tensile strength. Its initial yield strength can be 40% to 50% higher than conventional stainless steel S30408. Elongation of QN1803 can also achieve approximately 50%, which is equivalent to the conventional one. QN1803 also has a corrosion resistance as good as that of S30408. In this paper, both experimental and numerical studies on the new material were conducted. Full-range true stress-true strain relationships under both monotonic and cyclic loading were obtained. A cyclic plasticity model based on the Chaboche model was developed, where a memory surface was newly added and the isotropic hardening rule was modified. A user-defined material subroutine was written, and the proposed cyclic plasticity model can well evaluate full-range hysteretic properties of the material under various loading histories.

• Korean Journal of Cognitive Science
• /
• v.24 no.1
• /
• pp.1-24
• /
• 2013

The elderly population continues to increase in Korea and there has been a growing interest in understanding normal aging. In response to this public interest, the present paper reviewed human aging research focusing on recently published neuroimaging studies. For the first half of the paper, I reviewed the effects of aging on the brain and cognition. In normal aging, structural changes in the brain include atrophy and volume reduction in the prefrontal and temporal cortices. Functional changes are exhibited in the form of overactivation of the brain. Moreover, age-related cognitive decline is particularly observed in inhibition and memory, which are also associated with the age-related structural changes in the brain. For the second half of the paper, I introduced physical exercise studies showing that exercise played a protective role in the age-related neurocognitive decline. More specifically, engaging in physical exercise (particularly, aerobic exercise) for a relatively long period of time (e. g., > 6 mon.) protected older adults from volume loss in the prefrontal cortex and the hippocampus, and induced better inhibition and memory. These exercise-induced benefits appear to be associated with changes in neuronal levels, indicating that the aging brain is still plastic and this plasticity can be enhanced by physical exercise.