Full-range plasticity of novel high-performance low-cost stainless steel QN1803 |
Zhou, Yiyi
(Department of Structural Engineering, School of Civil Engineering and Architecture, Changzhou Institute of Technology)
Chouery, Kim Eng (Department of Disaster Mitigation for Structures, College of Civil Engineering, Tongji University) Xie, Jiang-Yue (Department of Disaster Mitigation for Structures, College of Civil Engineering, Tongji University) Shu, Zhan (Department of Structural Engineering, School of Civil Engineering and Architecture, Changzhou Institute of Technology) Jia, Liang-Jiu (Department of Disaster Mitigation for Structures, College of Civil Engineering, Tongji University) |
1 | Dundu, M. (2018), "Evolution of stress-strain models of stainless steel in structural engineering applications", Constr. Build. Mater., 165, 413-423. DOI: 10.1016/j.conbuildmat.2018.01.008. DOI |
2 | Gao, X., Zhang, X., Liu, H., Chen, Z. and Li, H. (2018), "Residual mechanical properties of stainless steels S30408 and S31608 after fire exposure", Constr. Build. Mater., 165, 82-92. DOI: 10.1016/j.conbuildmat.2018.01.020. DOI |
3 | Gardner, L. and Ashraf, M. (2006), "Structural design for non-linear metallic materials", Eng. Struct., 28(6), 926-934. DOI: 10.1016/j.engstruct.2005.11.001. DOI |
4 | GB/T 228.1 (2010), Metallic materials-Tensile testing-Part 1: Method of test at room temperature. |
5 | Ge, H.B. and Kang, L. (2014), "Ductile crack initiation and propagation in steel bridge piers subjected to random cyclic loading", Eng. Struct., 59, 809-820. DOI: 10.1016/j.engstruct.2013.12.006. DOI |
6 | Hradil, P., Talja, A., Real, E., Mirambell, E. and Rossi, B. (2013), "Generalized multistage mechanical model for nonlinear metallic materials", Thin-Wall. Struct., 63, 63-69. DOI: 10.1016/j.tws.2012.10.006. DOI |
7 | Hu, F., Shi, G. and Shi, Y. (2016), "Constitutive model for full-range elasto-plastic behavior of structural steels with yield plateau: calibration and validation", Eng. Struct., 118, 210-227. DOI: 10.1016/j.engstruct.2016.03.060. DOI |
8 | Huang, Y. and Young, B. (2017), "Post-fire behaviour of ferritic stainless steel material", Constr. Build. Mater., 157, 654-67. DOI: 10.1016/j.conbuildmat.2017.09.082. DOI |
9 | Jia, L.J. (2014), "Integration algorithm for a modified Yoshida-Uemori model to simulate cyclic plasticity in extremely large plastic strain ranges up to fracture", Comput. Struct., 145, 36-46. DOI: 10.1016/j.compstruc.2014.08.010. DOI |
10 | Jia, L.J., Ge, H.B., Shinohara, K. and Kato, H. (2016), "Experimental and numerical study on ductile fracture of structural steels under combined shear and tension", J. Bridge Eng. -ASCE, 04016008. DOI: 10.1061/(ASCE)BE.1943-5592.0000845. |
11 | Jia, L.J. and Kuwamura, H. (2015), "Ductile fracture model for structural steel under cyclic large strain loading", J. Constr. Steel Res., 106, 110-121. DOI: 10.1016/j.jcsr.2014.12.002. DOI |
12 | Jia, L.J. and Kuwamura, H. (2014a), "Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results", J. Struct. Eng.- ASCE, 140(2), 04013056. DOI: 10.1061/(ASCE)ST.1943-541X.0000848. DOI |
13 | Jia, L.J. and Kuwamura, H. (2014b), "Ductile fracture simulation of structural steels under monotonic tension", J. Struct. Eng.-ASCE, 140(5), 04013115. DOI: 10.1007/978-981-13-2661-5_4. DOI |
14 | Kuhlmann-Wilsdorf, D. and Laird, C. (1979), "Dislocation behavior in fatigue II. Friction stress and back stress as inferred from an analysis of hysteresis loops", Mater. Sci. Eng., 37(2), 111-120. DOI: 10.1016/0025-5416(79)90074-0. DOI |
15 | Jia, L.J., Ikai, T., Shinohara, K. and Ge, H.B. (2016), "Ductile crack initiation and propagation of structural steels under cyclic combined shear and normal stress loading", Constr. Build. Mater., 112, 69-83. DOI: 10.1016/j.conbuildmat.2016.02.171. DOI |
16 | Kang, L., Ge, H.B. and Kato, T. (2015), "Experimental and ductile fracture model study of single-groove welded joints under monotonic loading", Eng. Struct., 85, 36-51. DOI: 10.1016/j.engstruct.2014.12.006. DOI |
17 | Kang, L., Ge, H.B., Suzuki, M. and Wu, B. (2018), "An average weight whole-process method for predicting mechanical and ductile fracture performances of HSS Q690 after a fire", Constr. Build. Mater., 191, 1023-1041. DOI: 10.1016/j.conbuildmat.2018.10.068. DOI |
18 | Ohno, N. (1982), "A Constitutive model of cyclic plasticity with a nonhardening strain region", J. Appl. Mech., 49(4), 721-727. DOI: 10.1115/1.3162603. DOI |
19 | Liao, F., Wang, W. and Chen, Y. (2015), "Ductile fracture prediction for welded steel connections under monotonic loading based on micromechanical fracture criteria", Eng. Struct., 94, 16-28. DOI: 10.1016/j.engstruct.2015.03.038. DOI |
20 | Mirambell, E. and Real, E. (2000), "On the calculation of deflections in structural stainless steel beams: an experimental and numerical investigation", J. Constr. Steel Res., 54(1), 109-133. DOI: 10.1016/S0143-974X(99)00051-6. DOI |
21 | Quach, W.M., Teng, J.G. and Chung, K.F. (2008), "Three-stage full-range stress-strain model for stainless steels", J. Struct. Eng. - ASCE, 134(9), 1518-1527. DOI:10.1061/(asce)0733-9445(2008)134:9(1518). DOI |
22 | Wang, X., Chen, X., Yan, M. and Chang, M. (2018), "Constitutive model for ratcheting behavior of Z2CND18.12N austenitic stainless steel under non-symmetric cyclic stress based on BP neural network", Steel Compos. Struct., 28(5), 517-525. 10.12989/scs.2018.28.5.517. DOI |
23 | Ramberg, W. and Osgood, W.R. (1943), "Description of stress-strain curves by three parameters", National Advisory Committee for Aeronautics, Washington, D. C., USA. |
24 | Rasmussen, K.J.R. (2003), "Full-range stress-strain curves for stainless steel alloys", J. Constr. Steel Res., 59(1), 47-61. DOI: 10.1016/S0143-974X(02)00018-4. DOI |
25 | Theofanous, M. and Gardner, L. (2009), "Testing and numerical modelling of lean duplex stainless steel hollow section columns", Eng. Struct., 31(12), 3047-3058. DOI: 10.1016/j.engstruct.2009.08.004. DOI |
26 | Wang, Y.Q., Chang, T., Shi, Y.J., Yuan, H.X., Yang, L. and Liao, D.F. (2014), "Experimental study on the constitutive relation of austenitic stainless steel S31608 under monotonic and cyclic loading", Thin-Wall. Struct., 83, 19-27. DOI: 10.1016/j.tws.2014.01.028. DOI |
27 | Yousefi, A.M., Uzzaman, A., Lim, J.B.P., Clifton, G.C. and Young, B. (2017), "Numerical investigation of web crippling strength in cold-formed stainless steel lipped channels with web openings subjected to interior-two-flange loading condition", Steel Compos. Struct., 23(3), 363-383. https://doi.org/10.12989/scs.2017.23.3.363. DOI |
28 | Xiang, P., Shi, M., Jia, L.J., Wu, M. and Wang, C.L. (2018), "Constitutive model of aluminum under variable-amplitude cyclic loading and its application to buckling-restrained braces", J. Mater. Civ. Eng. - ASCE, 30(3), 04017304. DOI: 10.1061/(ASCE)MT.1943-5533.0002183. DOI |
29 | Yin, F., Yang, L., Wang, M., Zong, L. and Chang, X. (2019), "Study on ultra-low cycle fatigue behavior of austenitic stainless steel", Thin-Wall. Struct., 143, 106205. DOI: 10.1016/j.tws.2019.106205. DOI |
30 | Yousefi, A.M., Lim, J.B.P. and Clifton, G.C. (2018), "Cold-formed ferritic stainless steel unlipped channels with web perforations subject to web crippling under one-flange loadings", Constr. Build. Mater., 191, 713-725. DOI: 10.1016/j.conbuildmat.2018.09.152. DOI |
31 | Zhao, O., Rossi, B., Gardner, L. and Young, B. (2015), "Behaviour of structural stainless steel cross-sections under combined loading - Part I: Experimental study", Eng. Struct., 89, 236-46. DOI: 10.1016/j.engstruct.2014.11.014. DOI |
32 | Cai, Y. and Young, B. (2018), "Bearing resistance design of stainless steel bolted connections at ambient and elevated temperatures", Steel Compos. Struct., 29(2), 273-286. https://doi.org/10.12989/scs.2018.29.2.273 DOI |
33 | Armstrong, P.J. and Frederick, C.C. (1966), "A mathematical representation of the multiaxial Bauschinger effect", CEGB Rep. No. RD/B/N731, Central Electricity Generating Board, Berkeley, UK. |
34 | Arrayago, I., Real, E. and Gardner, L. (2015), "Description of stress-strain curves for stainless steel alloys", Mater. Design, 87, 540-552. DOI: 10.1016/j.matdes.2015.08.001. DOI |
35 | Bridgman, P.W. (1952). "Studies in large plastic flow and fracture." McGraw-Hill, New York. |
36 | Cai, Y. and Young, B. (2019), "Experimental investigation of carbon steel and stainless steel bolted connections at different strain rates", Steel Compos. Struct., 30(6), 551-565. https://doi.org/10.12989/scs.2019.30.6.551. DOI |
37 | Chaboche, J.L. and Dang, V. (1979), "Modelization of the strain memory effect on the cyclic hardening of 316 stainless steel", ONERA, TP no., 1979-109. |
38 | Chen, X., Chen X. and Chen, H. (2018), "Influence of stress level on uniaxial ratcheting effect and ratcheting strain rate in austenitic stainless steel Z2CND18.12N", Steel Compos. Struct., 27(1), 89-94. https://doi.org/10.12989/scs.2018.27.1.089. DOI |
39 | Chaboche, J.L. and Rousselier, G. (1983), "On the plastic and viscoplastic constitutive equations-Part II: application of internal variable concepts to the 316 stainless steel", J. Pressure Vessel Technol., 105(2), 159-164. DOI: 10.1115/1.3264258 DOI |