• Journal of Computing Science and Engineering
• /
• v.8 no.4
• /
• pp.215-227
• /
• 2014

In modern computer architectures, caches are widely used to shorten the gap between processor speed and memory access time. However, caches are time-unpredictable, and thus can significantly increase the complexity of worst-case execution time (WCET) analysis, which is crucial for real-time systems. This paper proposes a time-predictable two-level scratchpad-based architecture and an ILP-based static memory objects assignment algorithm to support real-time computing. Moreover, to exploit the load/store latencies that are known statically in this architecture, we study a Scratch-pad Sensitive Scheduling method to further improve the performance. Our experimental results indicate that the performance and energy consumption of the two-level scratchpad-based architecture are superior to the similar cache based architecture for most of the benchmarks we studied.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.563-570
• /
• 2006

Distributed control architecture is based on sharing control and data between multiple nodes on a network Communication and task sharing can be distributed between multiple control computers. Although many communication protocols exist, such as TCP/IP and UDP, they do not have the determinism that realtime control demands. Fiber-optic reflective shared memory creates the opportunity for realtime distributed control. This architecture allows control and computational tasks to be divided between multiple systems and operate in a deterministic realtime environment. One such shared memory architecture is based on Curtiss-Wright ScramNET family of fiber-optic reflective memory. MTS has built seismic and structural control software and hardware capable of utilizing ScramNET shared memory, opening up infinite possibilities in research and new capabilities in Hybrid and Model-In-The-Loop control.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1068-1074
• /
• 2010

In high speed railway, event recorder is essential system for analyzing the cause of train accident. It stores train operation sent by train control system in safe memory unit. Crash protected memory, the safe memory unit for event recorder, keeps the stored contents from severe environment. For crash protected memory, we have designed the architecture of concrete enclosure and controller board. Proposed system provides large volume of memory capacity and fault tolerance architecture. For checking the characteristics of proposed crash protected memory specification, the simulation is executed. Simulation results shows the designed crash protected memory meets all requirements.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.997-998
• /
• 2008

In this paper, we proposed a reduced memory overdrive architecture. Proposed overdrive architecture consists of 2D-DWT filter, BLI and Color Conversion block. For Frame Memory reduction we eliminated HH data in DWT-IDWT process and converted color space RGB into YCbCr. Consequently, we reduced Frame Memory about 50%.

• ETRI Journal
• /
• v.26 no.1
• /
• pp.21-26
• /
• 2004

This paper proposes a new architecture for a Viterbi decoder with an efficient memory management scheme. The trace-back operation is eliminated in the architecture and the memory storing intermediate decision information can be removed. The elimination of the trace-back operation also reduces the number of operation cycles needed to determine decision bits. The memory size of the proposed scheme is reduced to 1/($5{\times}$ constraint length) of that of the register exchange scheme, and the throughput is increased up to twice that of the trace-back scheme. A Viterbi decoder complying with the IS-95 reverse link specification is designed to verify the proposed architecture. The decoder has a code rate of 1/3, a constraint length of 9, and a trace-forward depth of 45.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.41-51
• /
• 1996

In this paper, anew parallel processing system based on a cluster architecture which provides scalability of a parallel processing system while maintains shared memory multiprocessor characteristics is proposed. In recent days low cost, high performnce microprocessors have led to construction of large scale parallel processing systems. Such parallel processing systems provides large scalability but are mainly used for scientific applications which have large data parallelism. A shared memory multiprocessor system like TICOM is currently used as aserver for the commercial application, however, the shared memory multiprocessor system is known to have very limited scalability. The proposed architecture can support scalability and performance of the parallel processing system while it provides adaptability for the commerical application, hence it can overcome the limitation of the shared memory multiprocessor. The architecture and characteristics of the proposed system shall be described. A proprietary hierarchical crsossbar network is designed for this system, of which the protocol, routing and switching technique and the signal transfer technique are optimized for the proposed architecture. The design trade-offs for the network are described in this paper and with simulation usihng the SES/workbench, it is explored that the network fits to the proposed architecture.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.1
• /
• pp.85-91
• /
• 2009

Recently, the LCD has high market share in TV market. The use of motion images in portable devices like DMB, PMP and Cell Phone is growing rapidly. One of the technique of enhancing the LCD's characteristic which is the slow response time. But, the technique requires a lot of memory usage, because of the requirement of frame memory. In this paper, we propose a reduction method for the frame memory that is required for LCD overdrive. Proposed overdrive architecture based on modified DWT-Inverse DWT and Color Conversion. The proposed architecture has a considerable PSNR. At once, it uses 50% of frame memory size and reduces 15% of frame memory size compare with previous architecture. The design was implemented using Xilinx Vertex4 and had 2172 Slice except Memory.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.6
• /
• pp.55-64
• /
• 2017

High-capacity, high-definition image applications need to process considerable amounts of data at high speed. Accordingly, users of these applications demand a high-speed parallel execution system. To increase the speed of a parallel execution system, Park (2004) proposed a technique, called MAMS (Multi-Access Memory System), to access data in several execution units without the conflict of parallel processing memories. Since then, many studies on MAMS have been conducted, furthering the technique to MAMS-PP16 and MAMS-PP64, among others. As a memory architecture for parallel processing, MAMS must be constructed in one chip; therefore, a method to achieve the identical functionality as the existing MAMS while minimizing the architecture needs to be studied. This study proposes a method of miniaturizing the MAMS architecture in which the architectures of the ACR (Address Calculation and Routing) circuit and MMS (Memory Module Selection) circuit, which deliver data in memories to parallel execution units (PEs), do not use the MMS circuit, but are constructed as one shift and conditional statements whose number is the same as that of memory modules inside the ACR circuit. To verify the performance of the realized architecture, the study conducted the processing time of the proposed MAMS-PP64 through an image correlation test, the results of which demonstrated that the ratio of the image correlation from the proposed architecture was improved by 1.05 on average.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.12
• /
• pp.85-92
• /
• 2007

With the development of the memory design and process technology, the production of high-density memory has become a large scale industry. Since these memories require complicated designs and accurate manufacturing processes, It is possible to exist more defects. Therefore, in order to analyze the defects, repair them and fix the problems in the manufacturing process, memory repair using BISR(Built-In Self-Repair) circuit is recently focused. This paper presents an efficient memory BISR architecture that uses spare memories effectively. The proposed BISR architecture utilizes the additional storage space named 'sign bit' for the repair of memories. This shows the better performance compared with the previous works.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.4
• /
• pp.1922-1940
• /
• 2019

IP address lookup is a function to determine nexthop for a given destination IP address. It takes an important role in modern routers because of its computation time and increasing Internet traffic. TCAM-based IP lookup approaches can exploit the capability of parallel searching but have a limitation of its size due to latency, power consumption, updatability, and cost. On the other hand, multibit trie-based approaches use SRAM which has relatively low power consumption and cost. They reduce the number of memory accesses required for each lookup, but it still needs several accesses. Moreover, the memory efficiency and updatability are proportional to the number of memory accesses. In this paper, we propose a novel architecture using an Indexed Multibit Trie (IMT) which is based on combined TCAM and SRAM. In the proposed architecture, each lookup takes at most two memory accesses. We present how the IMT is constructed so as to be memory-efficient and fast updatable. Experiment results with real-world forwarding tables show that our scheme achieves good memory efficiency as well as fast updatability.