• Journal of Korean Society on Water Environment
• /
• v.25 no.2
• /
• pp.205-211
• /
• 2009

In this study, the membrane filter method was compared to the MPN method for the analysis of total coliforms from raw water using raw test waters and controls including 6 standard strains of coliforms, and the various factors were analyzed on the detection of general and fecal origin coliforms. The range of error rate for the detection of 5 standard strains using the membrane filter and the MPN methods was 0 to 6% and 45 to 133%, respectively. The error rate of the membrane filter method was lower than that of the MPN method. The membrane filter method (m-Endo) showed 10% (11 out of 111) of difference for the detection sensitivity of coliforms isolated from raw water compared to the MPN method (BGLB). The membrane filter method was less affected by the factors including temperature, turbidity, charcoals of powder form, contamination, and reverse pressure. In conclusion, the membrane filter method is a better method for the analysis of total coliforms from raw water than the MPN method, considering the accuracy of detection and the tolerance to various experimental factors.

• Membrane Journal
• /
• v.24 no.2
• /
• pp.167-175
• /
• 2014

For selectively permeable membrane based on cellulose acetate butyrate (CAB) and polyethyleneimine (PEI) with water vapor transportability and DMMP protective performance, we intended to improve protective performance of the membrane against CEES using several additives. Results showed that CAB/PEI membranes possessed performance with good water vapor permeation (${\geq}1,800g/m^2/day$) and enhanced protective capability against CEES contamination ($7.1{\sim}11.5{\mu}g/cm^2{\cdot}day$). Of these membranes, the membrane containing $Ag^+$ ion and ionic exchange resin showed the best protective performance. And, we identified that the CAB/PEI membranes show excellent protection against aerosols with various particle sizes ($0.005{\sim}3{\mu}m$) simulating biological agents.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.12
• /
• pp.1666-1673
• /
• 2011

The presence of sialoglycoproteins (SGPs) in the membranes from goat (Capra aegagrus hircus), buffalo (Bubalus bubalis bubalis) and pig (Sus scrofa domestica) erythrocytes was investigated by partial purification with a chloroform-methanol extraction method followed by Sodium dodecyl sulphate - Polyacrylamide gel electrophoresis in comparison to human (Homo sapiens) erythrocytes. The results show that mammalian erythrocytes possess clear differences in the SGPs numbers and molecular weights although all animals studied in this experiment are from the same class i.e. mammalia. The SGPs number in human, goat, buffalo and pig are four (PAS-1 to PAS-4), ten (PAS-GI to PAS-GX), seven (PAS-BI to PAS-BVII) and four (PAS-PI to PAS-IV) respectively as indicated by staining the polyacrylamide gel with sialoglycoprotein-specific Periodic acid-Schiff's (PAS) stain. The new SGPs could be observed only after the partial purification of membrane fractions named as PAS-HI with molecular weight (Mr) 190 kDa and PAS-HII 150 kDa in human, PAS-BIA in buffalo and PAS-PIA and PAS-PIVA in pig. The gels were also stained with Coomassie brilliant blue (CBB) and Silver stain to check the contamination of other membrane proteins in the purified fractions. The quantitative distribution of SGPs was also determined by densitometry. Present study indicates that there are some basic differences in mammalian erythrocyte membrane SGPs, especially with respect to their number and molecular weights indicating major structural variations.

• Membrane and Water Treatment
• /
• v.9 no.5
• /
• pp.335-342
• /
• 2018

Micelle-Enhanced Ultrafiltration (MEUF) is a membrane separation processes that improving ultrafiltration process with the formation of micelles of the surface active agents. Surface active agents are widely used to improve membrane processes due to the ability to trap organic compounds and metals in the treatment of industrial waste water. In this study, surface active agents are used to improve micelle-enhanced ultrafiltration (MEUF) to reduce chemical oxygen demand (COD), total dissolved solid (TDS), turbidity and clogging the membrane in dairy wastewater treatment. Three important operational factors (anionic surface active agent concentration, pressure and pH) and these interactions were investigated by using response surface methodology (RSM) and Box-Behnken design. Results show that due to the concentration polarization layer and increase the number of Micelles; the anionic surface active agent concentration has a negative effect on the flux and has a positive effect on the elimination of contamination indices. pH, and the pressure have the greatest effect on flux. On the other hand, it could be stated that these percentages of separation are in the percentages range of Nano-filtration (NF). While MEUF process has higher flux than NF process. The results have been achieved at lower pressure while NF process needs high pressure, thus making MEUF is the replacement for the NF process.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.8
• /
• pp.1519-1528
• /
• 2017

Foodborne contamination and salmonellosis caused by Salmonella Enteritidis (S. Enteritidis) are a significant threat to human health and poultry enterprises. Outer membrane vesicles (OMVs), which are naturally secreted by gram-negative bacteria, could be a good vaccine option because they have many biologically active substances, including lipopolysaccharides (LPS), outer membrane proteins (OMPs), and phospholipids, as well as periplasmic components. In the present study, we purified OMVs derived from S. Enteritidis and analyzed their characteristics through silver staining and sodium dodecyl sulfate polyacrylamide gel electrophoresis. In total, 108 proteins were identified in S. Enteritidis OMVs through liquid chromatography tandem mass spectrometry analysis, and OMPs, periplasmic proteins, and extracellular proteins (49.9% of total proteins) were found to be enriched in the OMVs compared with bacterial cells. Furthermore, native OMVs used in immunizations by either the intranasal route or the intraperitoneal route could elicit significant humoral and mucosal immune responses and provide strong protective efficiency against a lethal dose (~100-fold $LD_{50}$) of the wild-type S. Enteritidis infection. These results indicated that S. Enteritidis OMVs might be an ideal vaccine strategy for preventing S. Enteritidis diseases.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.533-537
• /
• 2009

This paper introduces a modified electro spinning system for biomedical wound-healing applications. The conventional electrospinning process requires a grounded electrode on which highly charged electro spun ultrafine fibers are deposited. Biomedical wound-healing membranes, however, require a very low charge and a low level of remnant solvent on the electrospun membrane, which the conventional process cannot provide. An electrohydrodynamic process complemented with field-controllable electrodes (an auxiliary electrode and guiding electrodes) and an air blowing system was used to produce a membrane, with a considerably reduced charge and low remnant solvent concentration compared to one fabricated using the conventional method. The membrane had a small average pore size (102 nm) and high porosity (85.1%) for prevention of bacterial contamination. In vivo tests on rats showed that these directly electro spun fibrous membranes produced using the modified electro spinning process supported the good healing of skin bums.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.7-11
• /
• 2015

In order to protect the patterned mask from contamination during lithography process, pellicle has become a critical component for Extreme Ultraviolet (EUV) lithography technology. According to EUV pellicle requirements, the pellicle should have high EUV transmittance and robust mechanical property. In this study, silicon nitride, which is well-known for its remarkable mechanical property, was used as a pellicle membrane material to achieve high EUV transmittance. Since long silicon wet etching process time aggravates notching effect causing stress concentration on the edge or corner of etched structure, the remaining membrane is prone to fracture at the end of etch process. To overcome this notching effect and attain high transmittance, we began preparing a rather thick (200 nm) $SiN_x$ membrane which can be stably manufactured and was thinned into 43 nm thickness with HF wet etching process. The measured EUV transmittance shows similar values to the simulated result. Therefore, the result shows possibilities of HF thinning processes for $SiN_x$ EUV pellicle fabrication.

• Journal of Environmental Health Sciences
• /
• v.1 no.1
• /
• pp.28-31
• /
• 1974

A study was conducted to find out the biological contamination of wells in Chon Ho Dong areas, Seoul, Korea from May 4, 1971 through May 18 1971. Coliform groups were detected by membrane filter method and general sanitary conditions were checked. The results obtained were summarized as follows: 1) 61 wells (81.3%) out of 75 wells showed the evidence of coliform group. In urban areas it is recommended to use disinfectants for wells pretty frequently. 2) The wells in native villages were less contaminated than those in new villages established by poor people from slum areas of Seoul. 9 out of 15 wells at Song Pa Dong, which is However, at Bang E Dong's new village, 19 out of 20 wells were contaminatd by coliform groups. 3) Coliform groups were positive at 57 out of 61 open wells, while only 4 out of 14 pumping wells showed the evidence of coliform groups. 4) 38 out of 40 poorly drained wells were contaminated, however, 13 out of 25 well drained wells were coliform organisms positive.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.6
• /
• pp.425-436
• /
• 2021

In this study, chemically enhanced steam cleaning(CESC) was applied as a novel and efficient method for the control of organic and inorganic fouling in ceramic membrane filtration. The constant filtration regression model and the resistance in series model(RISM) were used to investigate the membrane fouling mechanisms. For total filtration, the coefficient of determination(R²) with an approximate value of 1 was obtained in the intermediate blocking model which is considered as the dominant contamination mechanism. In addition, most of the coefficient values showed similar values and this means that the complex fouling was formed during the filtration period. In the RISM, R _c/R _f increased about 4.37 times in chemically enhanced steam cleaning compared to physical backwashing, which implies that the internal fouling resistance was converted to cake layer resistance, so that the membrane fouling hardly to be removed by physical backwashing could be efficiently removed by chemically enhanced steam cleaning. The results of flux recovery rate showed that high-temperature steam may loosen the structure of the membrane cake layer due to the increase in diffusivity and solubility of chemicals and finally enhance the cleaning effect. As a consequence, it is expected that chemically enhanced steam cleaning can drastically improve the efficiency of membrane filtration process when the characteristics of the foulant are identified.

• Journal of Korean Society of Water and Wastewater
• /
• v.31 no.6
• /
• pp.501-510
• /
• 2017

In this study, it is estimated that ceramic membrane process which can operate stably in harsh conditions replacing existing organic membrane connected with coagulation, sedimentation etc.. Jar-test was conducted by using artificial raw water containing kaolin and humic acid. It was observed that coagulant (A-PAC, 10.6%) 4mg/l is the optimal dose. As a results of evaluation of membrane single filtration process (A), coagulation-membrane filtration process (B) and coagulation-sedimentation-membrane filtration process (C), TMP variation is stable regardless of in Flux $2m^3/m^2{\cdot}day$. But in Flux $5m^3/m^2{\cdot}day$, it show change of 1-89.3 kpa by process. TMP of process (B) and (C) is increased 11.8, 0.6 kpa each. But, the (A) showed the greatest change of TMP. When evaluate (A) and (C) in Flux $10m^3/m^2{\cdot}day$, TMP of (A) stopped operation being exceeded 120 kpa in 20 minutes. On the other hand, TMP of (C) is increased only 3 kpa in 120 minutes. Through this, membrane filtration process can be operated stably by using the linkage between the pretreatment process and the ceramic membrane filtration process. Turbidity of treated water remained under 0.1 NTU regardless of flux condition and DOC and $UV_{254}$ showed a removal rate of 65-85%, 95% more each at process connected with pretreatment. Physical cleaning was carried out using water and air of 500kpa to show the recovery of pollutants formed on membrane surface by filtration. In (A) process, TMP has increased rapidly and decreased the recovery by physical cleaning as the flux rises. This means that contamination on membrane surface is irreversible fouling difficult to recover by using physical cleaning. Process (B) and (C) are observed high recovery rate of 60% more in high flux and especially recovery rate of process (B) is the highest at 95.8%. This can be judged that the coagulation flocs in the raw water formed cake layer with irreversible fouling and are favorable to physical cleaning. As a result of estimation, observe that ceramic membrane filtration connected with pretreatment improves efficiency of filtration and recovery rate of physical cleaning. And ceramic membrane which is possible to operate in the higher flux than organic membrane can be reduce the area of water purification facilities and secure a stable quantity of water by connecting the ceramic membrane with pretreatment process.