• 한국구조물진단유지관리공학회 논문집
• /
• 제5권3호
• /
• pp.115-122
• /
• 2001

Bridge load rating calculations provide a basis for determining the load carrying capacity of bridges. Load rating requires engineering judgement in determining a rating value that is applicable to maintaining the safe use of the bridge and arriving at posting and permit decisions. Load testing is an effective means in calculating the rating value of bridge. In Korea, load carrying capacity of bridge is modified by response modification factor that is determined from comparisons of measured values and analysis results. This paper presents the development of a method for determining the response the modification factor, using traffic loads. The proposed method is based on the results of computer simulations of traffic action effects. The simulation program generates random traffic actions for defined traffic conditions and determines the frequency distribution of maximum traffic action effects. A comparison between the proposed method and the present method shows good agreement in estimating the modified load carrying capacity of bridges.

• 한국재료학회지
• /
• 제28권11호
• /
• pp.611-614
• /
• 2018

Laminate composites composed of $0.95Pb(Zr_{0.52}Ti_{0.48})O_3-0.05Pb(Mn_{1/3}Sb_{2/3})O_3$ piezoelectric ceramic and Fe-Si-B based magnetostrictive amorphous alloy are fabricated, and the effect of control of the areal dimensions and the thickness of the piezoelectric layer on the magnetoelectric(ME) properties of the laminate composites is studied. As the aspect ratio of the piezoelectric layer and the magnetostrictive layer increases, the maximum value of the ME voltage coefficient(${\alpha}_{ME}$) increases and the intensity of the DC magnetic field at which the maximum ${\alpha}_{ME}$ value appears decreases. Moreover, as the thickness of the piezoelectric layer decreases, ${\alpha}_{ME}$ tends to increase. The ME composites exhibit ${\alpha}_{ME}$ values higher than $1Vcm^{-1}Oe^{-1}$ even at the non-resonance frequency of 1 kHz. This study shows that, apart from the inherent characteristics of the piezoelectric composition, small thicknesses and high aspect ratios of the piezoelectric layer are important dimensional determinants for achieving high ME performance of the piezoelectric-magnetostrictive laminate composite.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.11-22
• /
• 2006

The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.

• 반도체디스플레이기술학회지
• /
• 제21권3호
• /
• pp.80-86
• /
• 2022

In this paper, the optimal design and circuit simulation verification results of an LLC resonant half-bridge dc-dc converter using a steady-state model with internal loss resistance are reported. Above all, the input/output voltage gain and frequency characteristic equations in the steady-state were derived by reflecting the internal loss resistance in the equivalent circuit. Based on the results, an LLC resonant half-bridge dc-dc converter with an input voltage of 360-420V, an output voltage of 54V, and a maximum power of 3kW was designed, and to verify the design, the PSIM circuit simulation was executed to compare and analyze the result. In particular, the operating range of the converter could be drawn from the frequency characteristic graph of the voltage gain, and when the converter was operated under light and maximum load conditions, it was confirmed that similar results were obtained by comparing simulation results and calculation results in the switching frequency characteristic graph. In addition, the change of the switching frequency with respect to the load current at each input voltage was compared with the calculated value and the simulation result. As a result, it was possible to confirm the usefulness of the analysis result reflecting the internal loss resistance proposed in this paper and the process of the optimal design.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.191-206
• /
• 2007

본 연구의 I부에서 유도된 포화된 다공성매체의 파동 전파속도와 감쇠에 대한 이론해를 전산코드화 하였다. 본 논문에서는 작성된 전산코드를 사용하여 파동의 전파속도와 감쇠에 미치는 외력 주파수의 영향과 재료특성치의 변화의 영향을 파악하기 위한 파라미터연구를 수행하였다. 첫 번째 형태의 파동에 대한 압축성 파동 속도는 주파수-투수성 곱이 증가함에 따라 파동속도가 하한치로부터 상한치로 변이하는 영역에서는 주파수-투수성 곱의 함수로써 변화함을 보여주었다. 또한 파동의 전파속도 변화율이 가장 클 때 감쇠값이 최대가 됨을 알 수 있었다 두 번째 형태의 파동에서 파동의 전파속도는 주파수-투수성 곱이 작은 값을 가질 때 거의 0값을 나타내며, 주파수-투수성 곱이 큰 값을 가질 때 상한값을 나타냄을 알 수 있었다.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 추계학술논문발표회 논문집
• /
• pp.210-215
• /
• 2008

As the rapid and various changing of social aspects, the structures are getting bigger, higher and more complex. The importance of evacuation is on the rise as increased using frequency of multiplex area and it's high population density. According to the result of a survey with 2 domestic multiplex population density, the maximum was 0.43(人/$m^2$) and 0.51(人/$m^2$). considering evacuation dangerousness, the maximum value will be suitable for computation of evacuation capacity and this will be submitted as a basic data for computation of evacuation capacity.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
• /
• pp.273-276
• /
• 2008

As the rapid and various changing of social aspects, the structures are getting bigger, higher and more complex. The importance of evacuation is on the rise as increased using frequency of multiplex sale facility and it's high population density. According to the result of a survey with 4 domestic wholesales mart's population density, the average and maximum was 0.41(人/$m^2$) and 0.46(人/$m^2$). considering evacuation dangerousness, the maximum value will be suitable for computation of evacuation capacity and this will be submitted as a basic data for computation of evacuation capacity.

• Macromolecular Research
• /
• 제9권3호
• /
• pp.164-170
• /
• 2001

Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the pom-pom equations have been derived by McLeish and Larson on the basis of the reptation dynamics with simplified branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for the simplified differential version of these constitutive equations. It is proved that they are globally Hadamard stable except for the case of maximum constant backbone stretch (λ = q) with arm withdrawal s$\_$c/ neglected, as long as the orientation tensor remains positive definite or the smooth strain history in the now is previously given. However this model is dissipative unstable, since the steady shear How curves exhibit non-monotonic dependence on shear rate. This type of instability corresponds to the nonlinear instability in simple shear flow under finite amplitude disturbances. Additionally in the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady now curves, the constitutive equations will possibly violate the positive definiteness of the orientation tensor and thus become Hadamard unstable.

• 한국통신학회논문지
• /
• 제22권3호
• /
• pp.481-492
• /
• 1997

This paper presents an algorithm for recognizing surface mount device(SMD) IC pattern based on the error back propoagation(EBP) neural network and discrete cosine transform(DCT). In this approach, we chose such parameters as frequency, angle, translation and amplitude for the shape informantion of SMD IC, which are calculated from the coefficient matrix of DCT. These feature parameters are normalized and then used for the input vector of neural network which is capable of adapting the surroundings such as variation of illumination, arrangement of objects and translation. Learning of EBP neural network is carried out until maximum error of the output layer is less then 0.020 and consequently, after the learning of forty thousand times, the maximum error have got to this value. Experimental results show that the rate of recognition is 100% in case of the random pattern taken at a similar circumstance as well as normalized training pattern. It also show that proposed method is not only relatively relatively simple compare with the traditional space domain method in extracting the feature parameter but also able to re recognize the pattern's class, position, and existence.

• 인지과학
• /
• 제23권3호
• /
• pp.295-322
• /
• 2012

본 연구에서는 벡터 공간 모델과 HAL (Hyperspace Analog to Language)을 적용해서 단어 의미 유사성을 군집한다. 일정한 크기의 문맥을 통해서 단어 간의 상관성을 측정하는 HAL을 도입하고(Lund and Burgess 1996), 상관성 측정에서 고빈도와 저빈도에 다르게 측정되는 왜곡을 줄이기 위해서 벡터 공간 모델을 적용해서 단어 쌍의 코사인 유사도를 측정하였다(Salton et al. 1975, Widdows 2004). HAL과 벡터 공간 모델로 만들어지는 공간은 다차원이므로, 차원을 축소하기 위해서 PCA (Principal Component Analysis)와 SVD (Singular Value Decomposition)를 적용하였다. 유사성 군집을 위해서 비감독 방식과 감독 방식을 적용하였는데, 비감독 방식에는 클러스터링을 감독 방식에는 SVM (Support Vector Machine), 나이브 베이즈 구분자(Naive Bayes Classifier), 최대 엔트로피(Maximum Entropy) 방식을 적용하였다. 이 연구는 언어학적 측면에서 Harris (1954), Firth (1957)의 분포 가설(Distributional Hypothesis)을 활용한 의미 유사도를 측정하였으며, 심리언어학적 측면에서 의미 기억을 설명하기 위한 모델로 벡터 공간 모델과 HAL을 결합하였으며, 전산적 언어 처리 관점에서 기계학습 방식 중 감독 기반과 비감독 기반을 적용하였다.