Browse > Article
http://dx.doi.org/10.5143/JESK.2006.25.2.011

Psychophysical and Physiological Study on Various Lifting Tasks  

Yun, Hun-Yong (동아대학교)
Publication Information
Journal of the Ergonomics Society of Korea / v.25, no.2, 2006 , pp. 11-22 More about this Journal
Abstract
The muscular-skeletal disorders(MSDs) that have become a major issue recently in Korean industrial safety area are mainly caused by manual material handling task. The objective of this study is to provide scientific data for the establishment of work safety standard for Korean workers through the experiments of lifting task under various conditions, in order to prevent the muscular-skeletal disorders in the industrial work site. Eight male college students were recruited as participants. Three different lifting frequencies(1, 3, 5 lifts/min) and three twisting angles(including the sagittal plane and two asymmetric angles; i.e., 0°, 45°, 90°) for symmetric and asymmetric tasks, respectively, with three lifting range from floor to knuckle height, knuckle to shoulder, floor to shoulder height for one hour's work shift using free style lifting technique were studied. The maximum acceptable weight of load(MAWL) was determined under the different task conditions, and the oxygen consumption, heart rate, and RPE were measured or recorded while subjects were lifting their MAWLs. The results showed that: (1) The MAWLs were significantly decreased as the task frequency and task angle increased.; (2) The heart rate, oxygen consumption, RPE significantly increased with an increase in lifting frequency although maximum acceptable weight of lift decreased.; (3) The highest heart rate and oxygen consumption was recorded at the lifting range of floor to shoulder, followed by floor to knuckle and knuckle to shoulder.; (4) The RPE value showed that subjects perceived more exertion at the high frequency rate of lifting task and lifting range of floor to shoulder height. (5) The modeling for MAWL using isometric strength, task angle and lifting frequency were developed. It is expected that use of the results provided in this study may prove helpful in reducing MMH hazards, especially from lifting tasks for Korean, and can be used as a basis for pre-employment screening.
Keywords
Modeling; MAWL; Psychophysical study; Lifting task; MSDs;
Citations & Related Records
연도 인용수 순위
  • Reference
1 한국산업안전공단. 2002년 산업재해원인조사. 2003
2 Ciriello, V. M., Snook, S. H., Hashemi, L. and Cotnam, J., Distributions of manual materials handling task parameters. International Journal of Industrial Ergonomics, 24, 379-388, 1999   DOI   ScienceOn
3 Mital, A., Psychophysical capacity of industrial workers for lifting symmetrical and asymmetrical loads symmetrically and asymmetrically for 8h work shifts. Ergonomics, 35, 745-754, 1992   DOI   ScienceOn
4 Ayoub, M. M., Bethea, N. J., Deivanayagam, S., Asfour, S. S., Bakken, G. M., Liles, D., Mital, A. and Sherif, M., Determination and modelling of lifting capacity(Final Report, HEW(NIOSH), Grant No. 5R01-OH-00545-02, 1978
5 Borg, G. A. V., and Noble, B. I., Perceived Exertion. Exercise and Sports Science Review, New York: Academic Press, 1974
6 Murphy, P.L. and Courtney, T. K., Low back pain disability: relative costs by antecedent and industry group. American Journal of Industrial Medicine, 30, 130-141, 1996   DOI   ScienceOn
7 Pope, M. H., Anderson, G. B. J, Frymoyer, J. W. and Chaffin, D. B., Occupational Low Back Pain, Mosby Year Book, St. Louis, 1991
8 Snook, S. H., The design of manual material handling tasks. Ergonomics, 21, 963-985, 1978   DOI   ScienceOn
9 Snook, S. H. and Irvine, C. H., Maximum acceptable weight of lift. American Industrial Hygiene Association Journal, 27, 322-329, 1967
10 SAS, Users Guide: Statistics, SAS Institute Inc. 5th ed. Box 8000, Cary, NC 27511, 1985
11 한국산업안전공단. 2003년 산업재해원인조사. 2004
12 박지수, 김홍기, 최진영, 작업유형에 따른 생리학적 작업능력의 비교분석. 대한인간공학회지, 15(2), 89-98, 1996
13 이관석, 박희석, 직접추정법의 대칭적인 들기 작업의 최대허용하중 결정에의 적용에 관한 연구, 대한인간공학회지, 14(1), 1-7, 1995
14 정성학, 김홍기, '인력물자취급시 작업빈도에 따른 인체심리학적 최대허용중량의 비교연구', 대한인간공학회지 춘계학술논문집, 39-49, 1997
15 Ayoub, M. M. and Mital, A., Manual Material Handling, Taylor & Francis, London, 1989
16 Mital, A. and Fard, H. F., Psychophysical and physiological responses to lifting symmetrical and asymmetrical loads symmetrically and asymmetrically. Ergonomics, 29, 1263-1272, 1986   DOI   ScienceOn
17 Leamon, T. and Murphy, P. I., Ergonomics losses in the workplace: their reality. In: Aghazadeh, F. (ed.), Advances in Industrial Ergonomics and Safety VI. London: Taylor & Francis, London, p.81-88, 1994
18 Mital, A. and Manivasagan, I., Maximum acceptable weight of lift as a function of material density, c.g. location, hand preference, and frequency. Human Factors, 25, 33-42, 1983   DOI
19 Garg, A., and Badger, D. Maximum acceptable weights and maximum voluntary isometric strengths for asymmetric lifting. Ergonomics, 29, 879-892, 1986   DOI   ScienceOn
20 Garg, A., and Banaag, J. Maximum acceptable weights, heart rates and RPEs for one hour's repetitive asymmetric lifting. Ergonomics, 31, 77-96, 1988   DOI   ScienceOn
21 Wu, S. and Hus, S. H., 'Psychophysical modelling of lifting capacity of chinese males using strength variables', Applied Ergonomics, 24(4), 251-257, 1993   DOI   ScienceOn
22 Yoon, H. Y. and Smith, J. L., Psychophysical study and physiological study of one-handed and two-handed combined tasks. International Journal of Industrial Ergonomics, 24, 49-60, 1999   DOI   ScienceOn
23 Astrand, P. O. and Rodahl, K., Textbook of Work Physiology. McGraw-Hill, 1986
24 Wu, S., Psychophysically determined symmetric and asymmetric lifting capacity of Chinese males for one hour's work shifts. International Journal of Industrial Ergonomics, 25, 675-682, 2000   DOI   ScienceOn
25 A.I.H.A. Technical Committee. Ergonomics guide to assessment of metabolic and cardiac costs of physical work. American Industrial Hygiene Association Journal, 32, 560-564, 1971   DOI   ScienceOn
26 김홍기, 인력물자취급의 권장 하중에 대한 생리학적 고찰. 대한인간공학회지, 16(3), 23-36, 1997
27 윤훈용, '한손연속작업의 심리육체학적 모델링', 대한인간공학회 춘계학술대회 논문집, 95-99, 1997
28 Dempsey, P. G. and Hashemi, L., Analysis of worker's compensation claims associated with manual materials handling, Ergonomics, 42, 183-195, 1999   DOI   ScienceOn
29 Chaffin, D. B., Ergonomics guide for the assessment of human static strength. American Industrial Hygiene Association Journal, 36, 505-511, 1975   DOI   ScienceOn