• Journal of Nutrition and Health
• /
• v.35 no.1
• /
• pp.15-23
• /
• 2002

Gender differences in the effects of gonadectomy and high cholesterol diet on body weight and body cholesterol were investigated by using Sprague Dawley rats. Body weight, plasma and liver levels of cholesterol and triglyceride and platelet aggregation were examined in ovariectomized(OVX) or orchidectomized(ODX) rats with their intacts after feeding diet with or without 0.5% cholesterol. Body weight was significantly increased(p < 0.01) in OVX rats and significantly decreased(p < 0.01) in ODX rats compared to their respective intact rats, and cholesterol diet significantly(p < 0.05) decreased body weight in gonadectomized rats. Liver lobes from rats fed cholesterol diet were opaque and larger than those from rats find control dict, resulting in a significant increase(p < 0.01) in LW/BW ratio. Plasma and liver levels of total cholesterol were significantly increased (p < 0.01) in female rats regardless ovariectomy when find 0.5% cholesterol diet, but those levels in male rats were increased only when they were orchidectomized(p < 0.0l). Plasma HDL-cholesterol was significantly decreased(p < 0.05) in both sexes when find cholesterol diet. HDL-cholesterol were higher in female than male rats regardless treatments(p < 0.05). Liver triglyceride was significantly increased(p < 0.05) in both sexes when find cholesterol dict. Plasma level of triglyceride was not different among groups except significant decrease(p < 0.05) in cholesterol find ODX rats. Maximum platelet aggregation in female rats was significantly lower(p < 0.05) than male, but ovariectomy and cholesterol diet caused an increase te the level of male rats. Microscopic examination showed cholesterol diet caused a lipid accumulation in liver. Results indicate that intact female rats have higher response to hypercholestcrolemic diet than intact male rats and orchidectomy causes male rats more responsive to hypercholesterolemic diet. However, ovariectomy causes an increase female food efficiency ratio to the level of male rats, significantly increasing body weight.

• The Journal of the Korea Contents Association
• /
• v.9 no.10
• /
• pp.451-463
• /
• 2009

The purpose of this research is to develop thin film materials and fabrication process for efficient $TiO_2$/CdTe solar cells. In this work photocatalyst titanium dioxide was prepared by sol-gel procedure according to reaction condition, the mole ratio of $H_2O$/TTIP, pH of solution and aging condition of powder. The prepared titanium dioxide was thermally treated from 300 to $750^{\circ}C$. Maximum intensity of anatase phase of titanium dioxide was achieved by calcination at $600^{\circ}C$ for 2 hr. And it was mixture of anatase and rutile phase when temperature of calcination was $750^{\circ}C$. It has been known that the properties of synthesized titanium dioxide according to aging time and calcination temperature was converted to anatase phase crystal on increasing of aging time. Also the current density has been increased with aging time and temperature, the efficiency has been increased with because of reason on above results. The formation of chemical bonding on oxygen and cadmium telluride under oxygen circumstances had been observed, and oxygen of thin film surface on cadmium telluride had been decreased with the treatment of chromate and hydrazine. As results had been shown that the energy conversion efficiency of cadmium telluride use by rapidly treatmented heat at the condition of $550^{\circ}C$ under air circumstance got 12.0%, 6.0% values according to $0.07cm^2$, $1.0cm^2$ surface area, respectively.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.6
• /
• pp.1418-1432
• /
• 1997

Most general content_based image retrieval techniques use color and texture as retrieval indices. In color techniques, color histogram and color pair based color retrieval techniques suffer from a lack of spatial information and text. And This paper describes the design and implementation of content_based image retrieval system using color space and keywords. The preprocessor for image retrieval has used the coordinate system of the existing HSI(Hue, Saturation, Intensity) and preformed to split One image into chromatic region and achromatic region respectively, It is necessary to normalize the size of image for 200*N or N*200 and to convert true colors into 256 color. Two color histograms for background and object are used in order to decide on color selection in the color space. Spatial information is obtained using a maximum entropy discretization. It is possible to choose the class, color, shape, location and size of image by using keyword. An input color is limited by 15 kinds keyword of chromatic and achromatic colors of the Korea Industrial Standards. Image retrieval method is used as the key of retrieval properties in the similarity. The weight values of color space ${\alpha}(%)and\;keyword\;{\beta}(%)$ can be chosen by the user in inputting the query words, controlling the values according to the properties of image_contents. The result of retrieval in the test using extracted feature such as color space and keyword to the query image are lower that those of weight value. In the case of weight value, the average of te measuring parameters shows approximate Precision(0.858), Recall(0.936), RT(1), MT(0). The above results have proved higher retrieval effects than the content_based image retrieval by using color space of keywords.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.355-355
• /
• 2002

In this paper, we designed a FPU(floating point unit) that it is very important and requires of high density when digital audio is designed. Almost audio system must support the multi-channel and required for high quality. A floating point arithmetic function in MPEG-2 AAC that implemented by hardware is able to realtime decoding when DSP realization. The reason is that MPEG-2 AAC is compatible to the Audio field of MPEG-4 and afterwards. We designed a FPU by hardware to increase the speed of a floating point unit with much calculation part in the MPEG-2 AAC Decoder. A FPU is composed of a multiplier and an adder. A multiplier used the Radix-4 Booth algorithm and an adder adopted 1's complement method for speed up. A form of a floating point unit has 8bit of exponent part and 24bit of mantissa. It's compatible with the IEEE single precision format and adopted a pipeline architecture to increase the speed of a processor. All of sub blocks are based on ISO/IEC 13818-7 standard. The algorithm is tested by C language and the design does by use of VHDL(VHSIC Hardware Description Language). The maximum operation speed is 23.2MHz and the stable operation speed is 19MHz.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.4
• /
• pp.341-349
• /
• 2002

Electrical, mechanical and sinterability properties of yttria-stabilized zirconia doped with 5.35wt% $Y_2$O$_3$(Y$_2$O$_3$- containing stabilized zirconia : YSZ) were studied as a function of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ addition. The ratio of monoclinic phase to tetragonal phase was changed by the addition of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ to 8.00 wt% and sintered density decreased with increasing $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ addition. Fracture toughness increased with the increase of monoclinic to tetragonal phase ratio and was maximum at about 18%. When transition metals such as CoO, Fe$_2$O$_3$ or MnO$_2$ was added more than 1.5 wt%, the electrical conductivity of YSZ increased. But $Al_2$O$_3$ hardly affected the electrical conductivity of YSZ. The addition of $Al_2$O$_3$, CoO, Fe$_2$O$_3$ and MnO$_2$ into YSZ resulted in the more complex behavior of fracture toughness and hardness variation and the specimen with 1.5wt%-Fe$_2$O$_3$, 3.0wt%-Al$_2$O$_3$ and 1.5wt%-CoO showed the monoclinic to tetragonal phase ratio of 18% and the highest toughness of 10.8 MPa.m$^{1}$2/ and Vickers hardness of 1201 kgf/mm$^2$.

• Korean Journal of Microbiology
• /
• v.37 no.2
• /
• pp.170-175
• /
• 2001

In order to produce xylitol with high yield, experiments were carried out to develope xylitol dehydrogenase(XDH) defective mutant from P. stipitis and to investigate the xylitol fermentation characteristics of mutant strain. After treatment of P. stipitis with EMS, mutant PXM-4 was selected based on te XDH activity and xylitol production capability. Among the tested cosubstrates, galactose was selected as an adequate cosub-strate on xylitol production of mutant PXM-4. But with the increase in the concentration of galactose in the medium, xylitol production was decreased because the transport of xylose into cell was inhibited by galactose. The optimal concentration of galactose for the production of xylitol using 20 g/ι xylose was 20 g/ι Under this condition, maximum concentration of xylitol and yield were 14.4 g/ι and 97%, respectively. In order to prevent the inhibitory effect of xylose transport by galactose, galactose was fed with low concentration and the concentration of xylitol produced was increased up to 25 g/ι.

• Korean Journal of Microbiology
• /
• v.30 no.5
• /
• pp.391-396
• /
• 1992

Anabaena variabilis A TCC 29413. a photoautotrophic and nitrogen fixing cyanobacteria. was investigated on the environmental factors regulating the growth and nitrogen lixation activity. A good growth of cyanobacteria] cells was observed due to nitrogen t1xation by the heterocyst differentiation in nitrogen free Allen and Arnon (]/8) medium. The nitrogenase activity was appeared to be in proportion to the cell growth lor 6 days then drastically decreased in the later growth period when the nitraTe was accumulated to high level in the culture to cause the inhibition. The optima] conditions lilr the cell growth and nitrogenase activity of A. varillbili.l were anaerobic. IO.OO0 lux. $30^{\circ}C$ and pH 8 with the nitrogen Cree minimal medium. The activity was significantly inhihited by the low concentrations of ammonium and nitrate. but was stimulated b) the ]ow Ieve] of phosphate and carbonate sources. The treatments of several toxic heavy metals showed strong inhibition of the cell growth and nitrogenase activity by O.3~10 ppm in the order of $Hg^{2+}$ > $Cd^{2+}$ > $Co^{2+}$ > $Zn^{2+}$ > $Ph^{2+}$, and the concentrations for 50% inhibition of the maximum activity were 0.41. 0.47. 0.5 L 0.66 and 8.1 ppm. respectively. The addition of carbohydrates (0.5~ 1.0%) in the dark condition stimulated the growth and activity in the order of sucrose > fructose > glucose.

• Asian Journal of Turfgrass Science
• /
• v.1 no.1
• /
• pp.56-68
• /
• 1987

During the regrowth the process after mowing, NRA in the leaf was the highest activity from the 5th day to the 7th day. Before mowing, the NRA in the root was not almost detected. But, the NRA in root appeared a rapid increasing activity from the 3rd day to the 4th day after mowing ( Figs.27 ~ 32). During the regrowth process after mowing, a general tendency of AA in the aboveground parts appeared an increasing tendency from the 1st day to the 4th day, a rapid increasing tendency from the 7th day to the 8th day reaching its peak, and a decreasing rate on the 8th and 9th day reaching its peak, and a decreasing rate on the 8th and 9th day. But the AA in the root appeared rapid increasing rate from the 2nd day to the 7th day, the heginning of reagrowth, this tendency showed a similar figure in the case of Total Soluble Carbohydrate ( TSC) in the internode. Both AA and NRA were appeared recovery stage frorn the 8th day after mowing(Figs.15~20). During the regrowth process after mowing, changes of the maximum plant lengths were 18.27cm in the 6cm mowing plot on the 24th day after mowing, 18.83cm in the 3cm mowing plot on the 18th day after mowing, and 18.16cm in the 6cm mowing plot on the 14th day after mowing ( Fig.2). During the regrowth process after mowing. changes in Dry Matter (DM) contents in leaf and stem were a slow decreasing tendency from the 1st day to the 4th day. From the 5th day to the 8th day it appeared a rapid increasing tendency. And afterward until the 15th day. All treatments were reached at a steady state ( Figs.3 ~ 8). During the regrowth process after mowing, changes in the TSC contents of stem and crown were a slow decreasing tendency from the 1st day to the 5-6th day. Prom the 7th to the 8th day three was a rapid increasing tendency. And afterward until the 15th day there was a decreasing rate at a steadyv state. In root there was a similar tendency to that of leaf and stem organs. A general tendency in internode, the TSC content appeared a similar figure to increment of AA (Figs. 9 - 14). During the regrowth process after mowing, changes in te Crude Proem (CP) content of ahoveground parts appeared a slow increasing tendency from the 1st day to the 5-6th day, where it is peak. And afterward to the 15th day there was a decreasing rate at a steady state. But, in toot there were a contrary tendency to that of aboveground

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.3
• /
• pp.206-213
• /
• 2004

As far as an opening device of fishing gears is concerned, applications of a kite are under development around the world. The typical examples are found in the opening device of the stow net on anchor and the buoyancy material of the trawl. While the stow net on anchor has proved its capability for the past 20 years, the trawl has not been wildly used since it has been first introduced for the commercial use only without sufficient studies and thus has revealed many drawbacks. Therefore, the fundamental hydrodynamics of the kite itself need to ne studied further. Models of plate and canvas kite were deployed in the circulating water tank for the mechanical test. For this situation lift and drag tests were performed considering a change in the shape of objects, which resulted in a different aspect ratio of rectangle and trapezoid. The results obtained from the above approaches are summarized as follows, where aspect ratio, attack angle, lift coefficient and maximum lift coefficient are denoted as A, B, $C_L$ and $C_{Lmax}$ respectively : 1. Given the triangular plate, $C_{Lmax}$ was produced as 1.26${\sim}$1.32 with A${\leq}$1 and 38$^{\circ}$B${\leq}$42$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$${\leq}$B${\leq}$50$^{\circ}$, $C_L$ was around 0.85. Given the inverted triangular plate, $C_{Lmax}$ was 1.46${\sim}$1.56 with A${\leq}$1 and 36$^{\circ}$B${\leq}$38$^{\circ}$. And When A${\geq}$1.5 and 22$^{\circ}$B${\leq}$26$^{\circ}$, $C_{Lmax}$ was 1.05${\sim}$1.21. Given the triangular kite, $C_{Lmax}$ was produced as 1.67${\sim}$1.77 with A${\leq}$1 and 46$^{\circ}$B${\leq}$48$^{\circ}$. And when A${\geq}$1.5 and 20$^{\circ}$B${\leq}$50$^{\circ}$, $C_L$ was around 1.10. Given the inverted triangular kite, $C_{Lmax}$ was 1.44${\sim}$1.68 with A${\leq}$1 and 28$^{\circ}$B${\leq}$32$^{\circ}$. And when A${\geq}$1.5 and 18$^{\circ}$B${\leq}$24$^{\circ}$, $C_{Lmax}$ was 1.03${\sim}$1.18. 2. For a model with A=1/2, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. Then there was a tendency of a very gradual decrease or no change in the value of $C_L$. For a model with A=2/3, the tendency of $C_L$ was similar to the case of a model with A=1/2. For a model with A=1, an increase in B caused an increase in $C_L$ until $C_L$ has reached the maximum. And the tendency of $C_L$ didn't change dramatically. For a model with A=1.5, the tendency of $C_L$ as a function of B was changed very small as 0.75${\sim}$1.22 with 20$^{\circ}$B${\leq}$50$^{\circ}$. For a model with A=2, the tendency of $C_L$ as a function of B was almost the same in the triangular model. There was no considerable change in the models with 20$^{\circ}$B${\leq}$50$^{\circ}$. 3. The inverted model's $C_L$ as a function of increase of B reached the maximum rapidly, then decreased gradually compared to the non-inverted models. Others were decreased dramatically. 4. The action point of dynamic pressure in accordance with the attack angle was close to the rear area of the model with small attack angle, and with large attack angle, the action point was close to the front part of the model. 5. There was camber vertex in the position in which the fluid pressure was generated, and the triangular canvas had large value of camber vertex when the aspect ratio was high, while the inverted triangular canvas was versa. 6. All canvas kite had larger camber ratio when the aspect ratio was high, and the triangular canvas had larger one when the attack angle was high, while the inverted triangluar canvas was versa.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.49-56
• /
• 2000

This study was designed to investigate the adsorption of heavy metal ions by untreated bark according to the treatment conditions of aqueous solution. The effect of temperature and pH of aqueous solution, particle size of bark, addition of light metal ions on the adsorption was examined, and the competition in adsorption among heavy metal ions was also evaluated. te The adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased with increasing themperature of solution from $-5^{\circ}C$ to $10^{\circ}C$ however, it was relatively constant at temperatures between $10^{\circ}C$ and $55^{\circ}C$. The adsorption ratio of $Cr^{6+}$ increased continuously with increasing the temperature of solution. The maximum adsorption ratio of $Cu^{2+}$, $Zn^{2+}$, and $Pb^{2+}$ was noted at pHs ranged 6 to 7; however, the adsorption ratio declined sharply on either sides of the optimum. The adsorption ratio of $Cr^{6+}$ decreased continuously with increasing the pH of solution. The adsorption ratio increased as decreasing the particle size of bark, and there was little differences in adsorption tendency between pine and oak bark. By the addition of $Ca^{2+}$ or $Mg^{2+}$(10~25 ppm), the adsorption ratio of $Cu^{2+}$ and $Zn^{2+}$ increased. An increase of the adsorption ratio was higher in oak bark than in pine bark. However, the adsorption ratio of $Pb^{2+}$ and $Cr^{6+}$ was not affected by the addition of light metal ions. As the mixed solution of 2 or 3 kinds of heavy metal ions($Cu^{2+}$, $Zn^{2+}$, $Pb^{2+}$) was treated with the untreated bark, the adsorption of $Zn^{2+}$ decreased considerably because of the competitive adsorption among heavy metal ions. Also the adsorption of $Cu^{2+}$ was more and less reduced. However the adsorption of $Pb^{2+}$ was not affected by the presence of other heavy metal ions.