• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1887-1894
• /
• 2016

In the RFID system, the reader transmits a query message to tags in order to identify a unique ID of tags within its detection range. The procedures for arbitrating a collision is essential because the multiple tags can response simultaneously in the same to the query of the Reader. This procedure is known as conflict resolution algorithm and it is a key technology in the RFID system. In this paper, we proposed a variable bits M-ary QT algorithm based on Manchester coding techniques. The proposed algorithm use the location information of the collision bits in the reader and tags. The proposed algorithm can reduce the number of the query-response cycle because it is capable of recognizing discontinuous bits and a variable number of bits. From computer simulation, the proposed method give better performance than the conventional M-ary QT techniques in terms of response, recognition efficiency, communication overhead.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.1
• /
• pp.46-53
• /
• 2008

This paper presents a 13.56 MHz RFID reader that can be used as a door-lock system for smart home security. The RFID reader consists of a transmitter, a receiver, and a data processing block. To verify the operation of the developed RFID reader, we present both a PSPICE simulation for transmitter/receiver and a digital simulation for data processing block. In particular, a CRC block for error detection of received data and a Manchester decoding block for position detection of collided data are designed using VHDL. In addition, we applied a binary search algorithm for multi-tag anti-collision. The anti-collision procedure is carried out by PIC microcontroller on software. The experimental results show that the developed reader can provide the right multi-tag recognition.

• Journal of the Speleological Society of Korea
• /
• no.81
• /
• pp.43-46
• /
• 2007

In this paper, we implement a wireless robot in which the RF communication the dangerous place where human cannot approach. In the proposed network image control system, the noise occurred in wireless communication is reduced by implementing the noise eliminating circuit and the driving time of a wireless robot is increased by adopting the recharge battery. By constructing the wireless communication, controled in the remote site with a wireless robot.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.881-886
• /
• 2003

This paper describes the design and implementation of a passive transponder chip for RFID applications. Passive transponders do not have their own power supply, and therefore all power required for the operation of a passive transponder must be drawn from the field of the reader. The designed transponder consists of a full wave rectifier to generate a dc supply voltage, a 128-bit mask ROM to store the information, and Manchester coding and load modulation circuits to be used for transmitting the information from the transponder to the reader. The transponder with a size 410 x 900 ${\mu}$m$^2$ has been fabricated using 0.65 ${\mu}$m 2-poly, 2-metal CMOS process. The measurement results show the data transmission rate of 3.9 kbps at RF frequency 125 kHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.211-219
• /
• 2001

This paper describes a read-only CMOS transponder IC for RFID applications. A full-wave rectifier implemented using NMOS transistors supplies the transponder with a dc supply voltage using the magnetic field generated from a reader. A 64-bit ROM has been designed for a data memory. Front-end impedance modulation and Manchester coding are used for transmitting the data from the transponder memory to the reader. A new damping circuit which has almost constant damping rate under the variations of the distance between the transponder and the reader has been employed for impedance modulation. The designed circuit has been fabricated using a 0.65${\mu}{\textrm}{m}$2-poly, 2-metal CMOS process. Die area is 0.9mm$\times$0.4mm. Measurement results show that it has a constant damping rate of around 20~25% and a data transmission rate of 3.9kbps at a 125KHz RF carrier. The power required for reading operation is about 100㎼. The measured reading distance is around 7cm.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.83-91
• /
• 2008

To design the light control system using the PLC(Power Line Communication) with the ballasts of MH(Metal Halide) lamps, we analyzed the noise effect on the power line by the electronic ballast. For the power line characteristics are changed by the loads, the ballast have to be designed to be suitable to the PLC. Therefore, this paper proposed the optimal ballast and designed two kinds of PLM(Power Line Modem) which one is ASK type and the other is FSK type. Two type of PLM have used the manchester codes or DS/SS code. Experimental results have shown that the FSK type modem by the DS/SS coding technique have the best characteristics.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.111-121
• /
• 2014

In this paper, we propose tree-based hybrid query tree architecture utilizing time slot. 4-Bit Pattern Slot Allocation(4-SL) has a 8-ary tree structure and when tag ID responses according to query of the reader, it applies a digital coding method, the Manchester code, in order to extract the location and the number of collided bits. Also, this algorithm can recognize multiple Tags by single query using 4 fixed time slots. The architecture allows the reader to identify 8 tags at the same time by responding 4 time slots utilizing the first bit($[prefix+1]^{th}$, F ${\in}$ {'0' or '1'}) and bit pattern from second ~ third bits($[prefix+2]^{th}{\sim}[prefix+3]^{th}$, $B_2{\in}$ {"00" or "11"}, $B_1{\in}$ {"01" or "10"}) in tag ID. we analyze worst case of the number of query nodes(prefix) in algorithm to extract delay time for recognizing multiple tags. The identification delay time of the proposed algorithm was based on the number of query-responses and query bits, and was calculated by each algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.6
• /
• pp.109-117
• /
• 2016

The most important mission of RFID reader is identify EPC (Electronic Product Code) of RFID tag of products that located within distinguishable range of RFID reader. RFID reader transmits query message to RFID tags through wireless channel and RFID tags send unique EPC to response its query message simultaneously. therefore tag collision occurred frequently. RFID tags collision resolution algorithm required to apply RFID technology to various industries. In this paper, we propose enhanced M-ary algorithm that collision bits location is used by not only RFID reader but also tags. the main feature of the proposed algorithm is that integrate multiple query message of M-ary QT algorithm to the single query message by analyze multiple response messages from tags. the simulation results show that the proposed algorithm give better performance than M-ary QT algorithm in terms of the number of query-response, identification efficiency and communication overhead.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.4
• /
• pp.358-365
• /
• 2011

Recently, the LED(Light Emitting Diode) replacing incandescent light bulbs and fluorescent light has great attentions as a most promising candidate for the next generation lighting source due to its environment-friendly characteristics, long life and excellent efficiency. Moreover, since it is a semiconductor device which can convert the electric energy to visible light at a very high speed, it can also used as a communication device. Therefore, the VLC(Visible Light Communication) using the LED can perform the near field communication and lighting function at the same time without additional expenses. However, since the switching device of the conventional LED driver for VLC is operated in the linear region, there exist several drawbacks such as a poor power conversion efficiency and serious heat generation. On the other hand, since the proposed driver is operated in the on/off switching region, it features a higher efficiency and more improved heat generation. To verify the validity of the proposed LED driver, experimental results from a prototype of 20W rated LED driver applied to 3MHz bps broadcasting audio system are given.