• Journal of the Korea Society of Computer and Information
• /
• v.25 no.11
• /
• pp.83-88
• /
• 2020

This paper proposes a method of applying an advanced preamble detection technology to wireless sensor nodes and analyzes the trade-off relationship between throughput and fairness that may occur when sensor nodes equipped with the MIM function compete with the legacy IEEE 802.15.4 sensors. Sensor nodes employing the MIM capability have more chances of concurrent transmissions than the legacy IEEE 802.15.4-based sensor nodes, resulting in gains in terms of throughput, whereas the transmission opportunities of 802.15.4 sensor nodes might be limited due to the additional simultaneous transmissions of the MIM sensor nodes. The extensive evaluation results performed under a test environment built using Python program with reflecting the setting value of a commercial sensor node shows MIM sensor nodes outperform up to 40% over the legacy 802.11 sensors. Meanwhile, it was confirmed that a balance can be achieved in terms of throughput and fairness by properly adjusting the concurrent transmission threshold.

• The Journal of Information Systems
• /
• v.23 no.1
• /
• pp.225-246
• /
• 2014

With the recent establishment of a ubiquitous environment and the paradigm shift to a smart society, the use of mobile devices, such as smart phones and tablet PCs, has become widespread. Thus, the trend is gradually shifting from using Web-based Instant Messenger to using Mobile-based Instant Messenger. Mobile Instant Messenger refers to a service that allows instant messaging as well as data sending and receiving between individuals with exclusive application programs(mobile Apps), which can be used in portable devices-such as smart phones-with wireless Internet access. Korea's portal sites, telecommunication companies, and even big companies have all rushed into the MIM market to join the competition. The reason so many companies are showing interest in the MIM business is because it is rising as a core platform to substitute portal sites in the mobile society, and MIM is perceived as the best means to attract and secure users. The intention to reuse or use continually was considered an important factor in maintaining a dominant position amidst such fierce competition, and consequently, most research thus far has reflected such thought. However, the frequent or long-term use of a system alone cannot indicate the definite success of the system, nor guarantee its dominant position in the market. On the contrary, MIM dependence, which goes beyond simple repetitive use and indicates a state where users actually or emotionally depend on a specific system, can better explain the user action. However, not much research has been conducted on dependence. The research results showed that lively message, concise message, message responsiveness, and social belonging significantly affected perceived usefulness. Message responsiveness, Link, and social belonging significantly affected flow. Flow significantly affected MIM dependence, and perceived usefulness did not affect MIM dependence. This study has proven that lively message, concise message, message responsiveness, Link, social belonging and perceived usefulness are important antecedents and mediating factors of MIM dependence. Moreover, this study is significant in that it explains the overall process of MIM dependence, and expands on the variety and scope of research that can be applied to MIM-related studies.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.221-222
• /
• 2006

This paper describes a Plasma Assisted Debinding and Sintering (PADS) equipment, which has been designed to process Metal Injection Molded (MIM) components. The use of a hybrid system combining a glow discharge with a conventional heating system makes debinding and sintering of MIM components, in the same heating cycle, a feasible industrial process. Characteristics as density, carbon content and mechanical properties are similar to traditionally processed MIM materials. The reduction of energy and gas consumption and shorter lead-times are economic advantages of PADS system. The clean environment of PADS is also an ecological advantage.

• Membrane Journal
• /
• v.31 no.3
• /
• pp.219-227
• /
• 2021

Molecularly imprinted membrane (MIM) is a porous polymer membrane incorporating with the molecular recognizing sites. In this study, the supporting P(AN-co-MA) asymmetric membrane was prepared by nonsolvent induced phase separation (NIPS) method. And then, MIM with lysozyme template sites was prepared using the surface imprinting method on the P(AN-co-MA) asymmetric membrane introducing a photoactive iniferter and then photo-grafting. The P(AN-co-MA) asymmetric membrane was modified with 3-chloropropyltrimethoxysilane and dithiocarbamate as a photoactive iniferter. To prepare a lysozyme imprinted membrane, the modified P(AN-co-MA) membrane was copolymerized with acrylamide as a functional momomer, N,N'-methylene bisacrylamide as a crosslinker and lysozyme as a template in the UV irradiation environment. The lysozyme imprinted MIM was analyzed by using SEM, FT-IR and EDS measurements. Its results confirm that all the P(AN-co-MA) membranes have an asymmetric structure and the iniferter group is successfully introduced on the membrane surface. The process parameters were adjusted to obtain MIM having the excellent lysozyme adsorption. The maximum lysozyme adsorption capacity reaches at 2.7 mg/g, which is 13 times higher than that of the non imprinted membrane (NIM). The permselective membrane filtration experiments of ovalbumin to lysozyme show that the P(AN-co-MA) MIM preferentially bounds a greater amount of lysozyme.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.2
• /
• pp.99-103
• /
• 2010

A new analytic solution was derived for the diffusion into or from an immobile zone of a rectangular 2-D pore. For a long time, the new solution converges to a traditional mobile-immobile zone (MIM) model, but only if the latter is used with an apparent initial concentration that is smaller by almost 20% than the true one. This is the tradeoff for using a simple MIM model instead of an exact model based on the diffusion equation. The mass-transfer coefficient was found to be constant for a sufficiently long time; it was proportional to the molecular diffusion and inversely proportional to the square of the pore depth. The mass-transfer coefficient was time-dependent for a sufficiently short time and may be significantly larger than its asymptotic value.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.136-146
• /
• 2023

Based on calculations using the macroscopic Maxwell's equations with mesoscopic boundary conditions, light absorption by a layered metal-insulator-metal (MIM) metamaterial system embedded in three different environments is investigated. Increasing the top metal thickness shifts the broad absorption band to lower dielectric-constant regions and longer wavelengths, for either TM or TE waves. Boosting the dielectric-layer thickness redshifts the broadband absorption to regions of larger dielectric constant. In air, for the dielectric-constant range of 0.86-3.40, the absorption of the system exceeds 98% across 680-1,033 nm. In seawater with optimized dielectric constant, ≥94% light absorption over 400-1,200 nm can be achieved; particularly in the wavelength range of 480-960 nm and dielectric-constant range of 0.82-3.50, the absorption is greater than 98%. In an environment with even higher refractive index (1.74), ≥98% light absorption over 400-1,200 nm can be achieved, giving better performance. The influence of angle of incidence on light absorption of the MIM system is also analyzed, and the angle tolerance for ≥90% broadband absorption of a TM wave is up to 40° in an environment with large refractive index. While the incident-angle dependence of the absorption of a TE wave is nearly the same for different circumstances, the situation is different for a TM wave.

• The Journal of Information Systems
• /
• v.25 no.3
• /
• pp.61-90
• /
• 2016

Purpose Recently the usage of Mobile Instant Messenger(MIM) has been increased all over the world. With the development of Mobile Internet, a large amount of mobile application came into being, such as WeChat, the most popular MIM now in China. It has a huge number of registered users, but just only half of them are the "active users". This study intends to examine what factors affect MIM user's continuance intention and actual usage behavior. Design/Methodology/Approach Based on the framework of Perception/Emotion-Behavior and the extended ECM-ISC (Expectation Confirmation Model of IS Continuance), this research introduced some unique variables to a user satisfaction model focusing on perceived/emotional factors in WeChat. In this model, perceived/emotional factors have been divided into enabler factors and inhibitor factors to analyze the effect on continuance intention and actual usage behavior. Also, the moderate effect of the habits was discussed. An online questionnaire survey of 203 WeChat users was conducted and the empirical validation was employed to test the research model. Findings From the empirical results, perceived usefulness, expectation confirmation, and needs for affiliation significantly affected satisfaction. Also, satisfaction influenced continuance intention which led to actual usage behavior. We found that the habit moderates the relationship between satisfaction and continuance intention. The result of this study provides guidance to the developers and operators of WeChat on how to improve enhance users' satisfaction and loyalty.

• Journal of Sensor Science and Technology
• /
• v.16 no.2
• /
• pp.97-103
• /
• 2007

Crystallized carbon nitride film that has many stable physical and/or chemical properties has been expected potentially by a new electrical material. However, one of the most significant problems degrading the quality of carbon nitride films is an existence of N-H and C-H bonds from the deposition environment. The possibility of these reactions with hydroxyl group in carbon nitride films, caused by a hydrogen attack, was suggested and proved in our previous reports that this undesired effect could be applied for fabricating micro-humidity sensors. In this study, MIS capacitor and MIM capacitor with $5{\mu}m{\times}5{\mu}m$ meshes were fabricated. As an insulator, carbon nitride film was deposited on a $Si_{3}N_{4}/SiO_{2}/Si$ substrate using reactive magnetron sputtering system, and its dielectric constant, C-V characteristics and humidity sensing properties were investigated. The fabricated humidity sensors showed a linearity in the humidity range of 0 %RH to 80 %RH. These results reveal that MIS and MIM $CN_{X}$ capacitive humidity sensors can be used for Si based micro-humidity sensors.

• Transactions on Electrical and Electronic Materials
• /
• v.10 no.5
• /
• pp.147-151
• /
• 2009

For integrated passive device (IPD) applications, we have successfully developed and characterized metalinsulator-metal (MIM) capacitors with 2000 $\AA$ plasma-enhanced chemical vapor deposition (PECVD) silicon nitride which are deposited with the $SiH_4/NH_3$ gas mixing rate, working pressure, and RF power of PECVD at $250^{\circ}C$. Five PECVD process parameters are designed to lower the refractive index and lower the deposition rate of $Si_3N_4$ films for the high breakdown electric field. For the PECVD process condition of gas mixing rate (0.957), working pressure (0.9 Torr), and RF power (60 W), the atomic force microscopy (AFM) root mean square (RMS) value of about 2000 $\AA$ $Si_3N_4$ on the bottom metal is lowest at 0.862 nm and the breakdown electric field is highest at about 8.0 MV/cm with a capacitance density of 326.5 pF/$mm^2$. A pretreatment of metal electrodes is proposed, which can reduce the peeling of nitride in the harsh test environment of heat, pressure, and humidity.

• Journal of Energy Engineering
• /
• v.19 no.4
• /
• pp.240-245
• /
• 2010

In this study, characteristics of wood pellet gasification was studied using a Two Stage Gasifier which is consisted of pyrolysis reactor and ultra high temperature reformer. The average yields of $H_2$, $CH_4$, CO, $CO_2$ were 16.7, 11.3, 37.2, 26.6 L/mim, conversion rate from biomass to gas was 65% in pyrolysis reactor and gas yields in reformer were 55.4, 0.8, 120.8, 56.8 L/mim, respectively. The hydrogen flow rate from reformer is obtained 360.1 L/hr. The most of $CH_4$ was decomposed from 12.3 to 0.3 vol.% while $H_2$ is from 18.2 to 23.7 vol.% in reformer by methane dry reforming, Boudouard reaction, oxidation and/or steam reforming. The amount of $H_2O$ generated by hydration reaction from reformer was 1111.8 g, its accelerated conversion of $CH_4$ to other products. The conversion rate from $CH_4$ to other Compounds was 97.2%. Cold gas efficiency was 53.2%.